Someone on Facebook the other day claimed that DJ-3As were made from surplus parts. As with any model during those years, there were some DJ parts used on other models. But, as with other models, there are parts unique to the DJ-3A and I’m learning more about them daily, one part at a time.
Today I spent time working on the transmission crossmember. Because finding a DJ-3A crossmember was near impossible (and since Rusty did not have a normal crossmember), I got a CJ-3A crossmember from Chris McKay for Rusty. But, I’ve decided to use the stock DJ-3A crossmember off of Patterson on Rusty and keep that jeep as stock as possible, and DJ-3A-matize the 3A crossmember for Patterson. Here are a couple pics:
So, to make the CJ crossmember a DJ unit, I will have to remove the transfercase cup and drill several holes.
Unfortunately, as I disassembled Patterson’s crossmember I ran into a couple problems with the rubberized mount for the transmission. Here’s a look at what I pulled off of Patterson. Note how narrow the two holes are for mounting the rubber piece to the transmission (too narrow for a standard T-90 mount:
