Monthly Archives: September 2018

To Top

1946 CJ-2A Flat Rock, MI **SOLD**

• CATEGORIES: CJ-2A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on $3500.

(06/21/2018) Apparently, this was a mail jeep. It’s got a top that fits it (CJ-6 top perhaps?). It runs, it drives, and is a bit different.

“1946 Willys cj2a has had lots of new parts on it over the past couple years new brakes rebuilt carburetor rebuilt generator(still on 6 volts), new tires inner tubes and powder coated wheels I know I’m going to forget alot of stuff. The only issues that I had with it are that it leaks and burns oil. So no long distance trips with it. It does run it does Drive and the 4 wheel drive works. High and low. I know I’ve spent more than $2,000 in Parts on it, for instance the wheels and tires alone where a thousand plus almost $800 for the brake system. master cylinder and all, just to name a few. It’s not pretty but it works. I’m looking to get $3,500 for it CASH only. Price is negotiable slightly. Thanks and there’s one thing I forgot to mention it used to be a mail truck back in the day and I do have the steel top that was originally on it. That’s why the body is extended about 12 inches in the back.”

1946-cj2a-flatrock-mi01946-cj2a-flatrock-mi11946-cj2a-flatrock-mi21946-cj2a-flatrock-mi3

[fb_button]
 
To Top

Year? Bantam TC-3 Trailer Pelham, NH $450

• CATEGORIES: trailer This site contains affiliate links for which I may be compensated.

Seller also has some brake parts.

https://nh.craigslist.org/tro/d/bantam-trailer-for-parts-or/6687796400.html

“Very rare late 40’s Bantam TC-3 trailer for parts or repair. Frame is very good, Original coupler and landing leg intact. Body is beat to death, New body is available for $950. If you are a genius with metal work this body could be hammered back into shape, very minor rust. original reflectors and tail light also intact, replacement light lens in available. other parts for sale;

Pair of M100/Bantam fenders. $150
M100 axle with brakes. $150
Bantam springs. $50
Willys/Jeep Wheel with hubcap clips, 16×5. $100
$700 for everything.”

tc3-trailer-pelham-nh

[fb_button]
 
To Top

2 GPWs Rexburg, ID **Status Unknown**

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE: Status Unknown. One was $5000 and one $1000.

“I have two WW2 Ford GPW Jeep projects for sale.

1. 1943 Ford GPW rolling chassis and body. Frame will need repairs, body very rough. Frame number and body number match. No engine or trans included, however I have non working F script trans and transfer I will include at additional cost. This would be a good candidate for a replacement body. Clear Idaho title in my name. $1000.

gpw-rexburg2
2. 1945 Ford GPW restored chassis and replacement body, including front fenders. Includes F script transmission and bell housing. This has been a running Jeep. I am keeping the engine and wheels pictured for another project, but I have wheels and tires for it. This is a very nice looking Jeep and would be an easy project to complete. Clear Idaho title in my name. $5000.”

gpw-rexburg1

[fb_button]
 
To Top

Year? M-38? inland Empire, CA $1800

• CATEGORIES: GPW (Ford MB), M-38, MB This site contains affiliate links for which I may be compensated.

Listed as a 1943, it has rear floaters, but also has an MB/GPW body. The grille tilts, but the hinges are reversed. I suspect it’s an M-38 body on a WWII chassis.

https://inlandempire.craigslist.org/cto/d/willys-jeep/6687278003.html

“1943 willys Jeep
Set up with a small block Ford 302 auto transmission C4 model 20 transfer case, to a Dana 44 rear 427 gears Dana 25 front matching gears. 11 inch brakes. Body in good condition for its age minimal rust. It is not running and will need to be towed clean Arizona pink”

year-m38-ie-ca0

year-m38-ie-ca2 year-m38-ie-ca1

[fb_button]
 
To Top

1963 CJ-6 Las Vegas, NV **SOLD**

• CATEGORIES: CJ-6 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

Doesn’t run. The driver’s side rear corner has damage.

“1963 Jeep Willy’s CJ6
Clean Nevada title
This is not a cj5 kit. It is an original cj6.
Motor is the 307 and is in good shape. Hasn’t ran in a while. Body damage on the driver corner panel.”

1963-cj6-lv-nv01

1963-cj6-lv-nv0 1963-cj6-lv-nv1 1963-cj6-lv-nv2 1963-cj6-lv-nv3

[fb_button]
 
To Top

1953 CJ-3A JeepRod Phoenix, AZ $6500

• CATEGORIES: CJ-3A, Jeep Rods This site contains affiliate links for which I may be compensated.

Seems to need more work?

https://phoenix.craigslist.org/wvl/cto/d/willys-jeep-cj3a/6687025954.html

“1953 willys cj3 .owner built hot/rat rod. Complete fabricated new frame. Has 4.3 v6 w/700r4 trans. Dana 44 rear with disc bks. Coil overs on rear. Mustang 11 front. See pics for rest of body parts. Can build out. Calls only pls too much here for text tag”

year-cj3a-jeeprod-phx-az2 year-cj3a-jeeprod-phx-az3 year-cj3a-jeeprod-phx-az4

[fb_button]
 
To Top

1944 MB MZ2 Atascadero, CA **SOLD**

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5000.

Has parts not shown in the pics, including 3 engines.

“I am selling a nice WW2 USMC jeep. It started life as a mz2 radio jeep used to send radio messages from shore to ship. It has never been off its frame as it still has its original frame bolts. Does have a grill and windshield just off of it currently. Comes with 3 motors and a bunch of other radio parts but will sell without the radio parts for cheaper.”

1944-mb-mz2-atascadero-ca1 1944-mb-mz2-atascadero-ca2 1944-mb-mz2-atascadero-ca3

[fb_button]