Monthly Archives: February 2022

To Top

1949? CJ-2A Summerville, SC $20,000

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

Looks like a nice jeep.

https://charleston.craigslist.org/cto/d/summerville-1949-willys-jeep-cj2/7441472386.html

1949-cj2a-summerville-sc0 1949-cj2a-summerville-sc1 1949-cj2a-summerville-sc2 1949-cj2a-summerville-sc3 1949-cj2a-summerville-sc4

This a totally restored Jeep the original owner invested over $30,000 everything is rebuilt are replaced. You have to see it to believe it. All original drive train with a add on overdrive, that adds 10% to top end. That’s the extra stick you see in the floor with the 4 wheel drive. It has a new body, that wasn’t prepped right and the paint is peeling in some places. I have all the receipts pictures of a the rebuild. New springs tires brake steering box and all steering linkage new steering wheel seats gas tank total drive train rebuilt new wring 12 volt new radiator. New top and doors, electronic ing.
I hate to sell it but I’m getting to old to get in and out of it. I learned to drive on a 1948 on the farm Dad traded the 48 for a 1952 which he kept until 1967. Needless to say this is memory lane for me, when I saw it I had to have it. I hope whoever gets it has the same thrill.
I have recently install the blocks on hood for the wind shield when it is layed down.”

 
To Top

1962 FC-170 Bradenton, FL $7600

• CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.

It’s a still a project.

https://sarasota.craigslist.org/cto/d/bradenton-jeep-fc170-rare1962-model/7449789140.html

1962-fc170-bradenton-fl1 1962-fc170-bradenton-fl2 1962-fc170-bradenton-fl3

“Rare Jeep model FC170 4WD – DUAL DRIVE Project. I don’t have time to finish this JEEP project. It already has a Chevy 350 engine, 700R4 transmission, tilt steering, bucket seats (plus original seats) windshield and rear glass, B&M shifter, Lokar gas pedal linkage, radiator, carb, pullies, drive shaft components, extra fenders, front brakes, and much more.
We just have to many projects at this point to finish this rare 1962 Jeep FC170.”

 
To Top

1947 CJ-2A Rochelle, VA $7000

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

The body is a little rough, but it runs and drives.

https://charlottesville.craigslist.org/pts/d/rochelle-1947-cj2a/7440147589.html

1947-cj2a-rochelle-nc1 1947-cj2a-rochelle-nc2 1947-cj2a-rochelle-nc3 1947-cj2a-rochelle-nc4

“1947 willys cj2a, runs drives and stops. Great patina, has some rust. Everything underneath has been sanded and painted. Motor was refreshed with a hone job, new rings, new bearings and all new gaskets and seals. New Master cylinder, brake lines and wheel cylinders. New gas tank and lines. New aluminum radiator. Doesn’t smoke, runs and idles good. 4wd and 4 low works. Runs on 12 volts but Needs a alternator or put back to 6 volt. Some lights work but not all. May be interested in trades.”

 
To Top

1952 M-38 Christmas, FL $15,000

• CATEGORIES: M-38 • TAGS: , This site contains affiliate links for which I may be compensated.

Looks nice, but doesn’t run at the moment. Given the 3Bs and DJ-3As were produced into the 1960s, the M-38 wasn’t quite the last of the flat fenders.

https://orlando.craigslist.org/cto/d/christmas-1952-willys-jeep/7448242763.html

“1952 M38 Willys Jeep – last of the flat fender military jeeps, period motor not currently running. Everything is intact nothing missing Jeep is still 24V original, zero rust. Clean Florida title”

1952-m38-chirstmas-fl1 1952-m38-chirstmas-fl2

 
To Top

Fiberglass Tub and Parts Stoughton, MA **SOLD**

• CATEGORIES: Body Parts, Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1200.

The tub looks in very good shape. I would guess the seller is correct, that this is an older lightweight California tub similar to one I had from the 1970s. ‘$1200 gets you everything. $1000 just gets you the tub.

fiberglass-body-stoughton-ma0 fiberglass-body-stoughton-ma1 fiberglass-body-stoughton-ma2 fiberglass-body-stoughton-ma3 fiberglass-body-stoughton-ma4

“We have available a fiberglass replacement tub for a flat fender Willys Jeep.

I believe this is for a CJ2A / CJ3A setup…but, maybe it also fits military MB M38 Ford GPW? Even though they had the high hood and slightly taller cowl I think it could potentially fit CJ3B , too?? The last photo shows the height of the cowl.

Doing some searching online I see ACME & Brian Chuchua’s may have made them at one point…but otherwise I don’t know the manufacturer.

This was from a project that started, but never fully mounted. Some holes were started on the firewall, and the fenders look like they started to get cut on the inside, but otherwise it’s still relatively “new”. Has some extra metal brackets / supports for around the firewall. It’s relatively light, but still feels solid.

Also available/included was a Bestop soft top (just the skins & doors no frame work) and 2 black front seats.
$1200 for everything or
$1000 for the body tub with fenders (I shouldn’t have to say this but CASH ONLY no electronic payments or checks!!)”

 
To Top

1956 DJ-3A Body w/ 4WD Eveleth, MI $1500

• CATEGORIES: DJ-3A This site contains affiliate links for which I may be compensated.

This looks to be a Convertible DJ-3A body on a 4WD chassis or a DJ-3A chassis converted to 4WD. The serial number is 56337-10467, though the last digit is very hard to read, making the body from 1946.

https://detroit.craigslist.org/wyn/pts/d/eveleth-1949-jeep-cj-3a-parts-or-will/7434190001.html
1956-dj3a-eveleth-mi2 1956-dj3a-eveleth-mi3 1956-dj3a-eveleth-mi4

1956-dj3a-eveleth-mi1

“1st thing look up the zip code so you know where the item is located. If your not willing to come and get it or have someone haul it then please do not bother to proceed any farther. I can haul it but 1/2 down before moving and 1/2 down of haul fee.
From best i can find this is around a 1949 CJ-3, the motor, a overhead valve cylinder engine, we put in years ago but then just forgot about working on it. The tub is loose, the fender is off, one is missing. What you see in the pics is what you get, it is a project without a title. The jeep has the vin tag on the tub but is hard to read”

 
To Top

1960 DJ-3A Surrey Dacula, GA $20,000

• CATEGORIES: DJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: This Surrey was posted to eBay last September (2021). There’s a lot to like here, but the floors have been patched.

https://atlanta.craigslist.org/nat/cto/d/dacula-1960-willys-dj3a-surrey/7442633031.html

Offered for sale, 1960 Willys DJ3A Surrey 2WD- Serial #18201. This 61 year old collector’s item jeep has been sitting in a warehouse protected from the elements for the past 35 years. This jeep is virtually unmolested from its humble beginnings. Odometer shows 26,000 original miles. Somewhere along its life the front floor pans were reinforced due to hat channel rust-out and some bondo on driver side panel. . Jeep was originally two tone Tropical Rose and Coral Mist, seems to have been over sprayed in coral mist pink and the striped top was replaced at some point with what is currently on it.

1960-dj3a-surrey-dacula-ga-1 1960-dj3a-surrey-dacula-ga-2 1960-dj3a-surrey-dacula-ga-3 1960-dj3a-surrey-dacula-ga-4 1960-dj3a-surrey-dacula-ga-5

See some older pics (from 09/2021) and more info below:

Continue reading

 
To Top

1951 CJ-3A Grantville, GA $500

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

Tub is off the jeep.

https://atlanta.craigslist.org/wat/for/d/franklin-1951-willys-cj3a-jeep-parts/7441561090.html

1951-cj3a-atlanta-geor

“I have some old willys Jeep parts for sale. I have a tub, hood, fenders, grille, and windshield from a ‘52 Cj3a. The tub is in pretty rough condition on one side. The fenders aren’t rusty but have a couple grinder cuts in them. The grille is ok. The hood is ok. The windshield frame is pretty good. It would be good for a woods buggy or you can use the windshield frame, hood and grille for your project.
I also have a transmission, transfer case and a set of axles, Dana 25 and Dana 41 from a ‘48 cj2a. The transmission and transfer case will need rebuilding. The axles have a rare set of locking hubs on them, there were a few different types of locking hubs for these jeeps. Also comes with an old ford inline 6 engine. Needs rebuilding
$500 for all of it. Must take it all. I can help you load it onto your trailer.

The pictures are older pictures. The tub is off of the frame now.”

 
To Top

Willys-powered Generator Hamilton, OH **SOLD**

• CATEGORIES: Industrial-Welder-Generator This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $800.

Unclear how much value is here.

“Army Signal Corps generator for sale. Was stored inside old barn for the last many? years. Unit ran when stored. Flat head Willy’s Jeep engine with governor. Has oil in engine. $800.00 for the complete unit, $600.00 for the engine or best reasonable offer. Local pick up, cash sale only. I can load on your trailer. Approximate weight, 1600 lbs.”

generator-hamilton-oh1 generator-hamilton-oh2

 
To Top

1946 CJ-2A Mc Kenzie, AL $1500

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

Unclear how much value is here.

https://okaloosa.craigslist.org/for/d/mc-kenzie-1946-willy-jeep-cj-2a/7442064579.html

“Vehicle runs needs restoring. All intact missing starter can be pulled off to crank.”

1946-cj2a-ga