| 1946 Willys CJ-2A $1,150 Birmingham, AL |
| Seems like a ’46 listed as a ’47. It ran when parked so that’s a plus. Pretty rough. |
| INFORMATION FROM SELLER: |
| 1947 Willy’s jeep civil defense with a frame attachment, motor ran when it was parked few years ago sat since. Price is 1,150 obo |
| https://www.facebook.com/share/1BMk1conMm/ |
CJ-2A Research Archives
1946 Willys CJ-2A $10,000 New Fairfield, CT
| 1946 Willys CJ-2A $10,000 New Fairfield, CT |
| When you start to add up the parts and pieces the price is not way out there. Really would need to do some homework on the parts listed and work performed, but it’s a long list of stuff. I do get its on the higher end of price for a re-tub project, but go over the list and see where the all in would be here might be worth a look. |
| INFORMATION FROM SELLER: |
| I have my 1946 Willys Cj2a project for sale This has been a long term project The frame has been blasted and everything has been coated with Por the axles have been rebuilt with larger 10” drum breaks from a later model .the engine has been rebuild with new bearings ,rings ,gaskets,seals and it has a new upgraded aluminum radiator it also has a new 12v high torque starter and a new 12v alternator. The body has been replaced with a brand new tub kit from mb Juan The jeep has new upholstery ,new gauges new tires and tubes Needs to be sanded ,painted and put back together This was running and driving last year and wouldn’t take much to make it run again, it’s just been sitting in a garage |
| https://www.facebook.com/share/1Dcs9wHN6c/ |
Willys Jeep Parts Everything $200 Raleigh, NC
| Willys Jeep Parts Everything $200 Raleigh, NC |
| INFORMATION FROM SELLER: |
| 1 BRAND NEW not even unwrapped passenger seat frame (Seat 20.5inx14in, back is 18inx18in) -4x wheels and tires Tube Type 6.50-16 -2 Axles: Dana 25 Front, Spicer 23-2 Rear 538 gearing (internals spin, no hubs on Dana 25) -Transmission & Transfer case for a column shift -Steering component for column shift -Misc parts as shown Sale is “as is” and all together. Must come pick up. |
| https://www.facebook.com/share/18AoKJydeh/ |
CJ-2A Artic Top $300 Bedford, VA
| CJ-2A Artic Top $300 Bedford, VA |
| INFORMATION FROM SELLER: |
| Artic top and doors for a willys cj2a |
| https://www.facebook.com/share/17qwcFPtko/ |
1946 Jeep CJ-2A $19,000 Red Hook, NY
1946 Jeep CJ-2A $19,000 Red Hook, NY |
Nice looking CJ-2A
INFORMATION FROM SELLER:
This is a very original, unmodified early CJ2A. In fact it is one of the first produced after WW11 withe the rare column shift. It also the PTO running the rear power shaft with the ability to also run a sprocket for a front winch. The previous long term owner states the mileage is original and the plow is a Jeep made unit which has been seldom if ever used. Most all paint is original along with a dealer installed “ash tray” radio and hydraulic pressure gauge. There is no rust and recent maintainable includes tires, shocks, steering stabilizer along with new upholstery and a very nice top and doors. We bought this unit to restore to a military configuration but it is just to nice and original to do that. The Jeep starts, runs and stops as it should. Original maintenance and parts manual included. Might swap for WM300 Power Wagon. As always, no test pilots. Thanks
1947 Willys CJ-2A with 1946 BANTAM T393 $18,000 Orland, CA
| 1947 Willys CJ-2A with 1946 BANTAM T393 $18,000 Orland, CA |
| Bit of a Willys Salad here. |
| INFORMATION FROM SELLER: |
| 1947 JEEP WILLY CJ 2A WITH ORIGINAL ENGINE (JEEP WILLY’S) HAS MB BODY, overstock after war turned into Civilian CJ 2A, originally painted Harvest Red, Stamped 38001 on driver’s rail 1946 BANTAM T3-93 UTILITY TRAILER (Civilian) ALL ORIGINAL, very straight and clean Both Jeep and Trailer have been traveling together all their time and ONLY selling together as package deal, THANK YOU Available in Orland CA |
| https://www.facebook.com/share/1D6XyKh1re/ |
1946 CJ-2A $3,500 Fort Wayne, IN
| 1946 CJ-2A $3,500 Fort Wayne, IN |
| Seller lists unknown year, but mostly looks like a ’46. |
| INFORMATION FROM SELLER: |
| 1940s something Willis jeep no title will do bill of sale new battery needs tlc to run not too sure on Miles it’s complete jeep |
| https://www.facebook.com/share/1CMcxASXH1/ |
Willys CJ-2A to M-38A1 Axles $200 Janesville, WI
| Willys CJ-2A to M-38A1 Axles $200 Janesville, WI |
| Spare axles. Maybe someone can narrow these down to what they will fit, or maybe tey will fit what they posted? |
| INFORMATION FROM SELLER: |
| This is a pair of 1946 to 1960 cj2 or mb38-a1 willys jeep axles in good shape. $200.00. For the pair. Use for jeep replacement or DIY project. Thanks |
| https://www.facebook.com/share/19xdmRdEs1/ |
Jeep CJ-2A Ramsey Winch Complete PTO $2,500 Wales, WI
| Jeep CJ-2A Ramsey Winch Complete PTO $2,500 Wales, WI |
| Ramsey Winch and PTO set up. |
| INFORMATION FROM SELLER: |
| Complete Ramsey pto winch out of my 46 willys cj2a. Transfer case, shifter, drive shafts, winch and cable. System is complete and i don’t want to split up parts and will only sell as complete unit.
TRANSMISSION IS NOT INCLUDED, JUST THE TRANSFER CASE. |
| https://www.facebook.com/share/1DmMTifYno/ |
MISC Parts CJ2A, WWII MB & GPW stuff Mukwonago, WI
| MISC Parts CJ2A, WWII MB & GPW stuff Mukwonago, WI |
| Seller has some parts listed and has some more stuff. There are 3 ads here so far for an oil filter housing, wheel cylinders, steering parts. Various prices. |
| INFORMATION FROM SELLER: |
| PS… I do have other early Willys Jeep stuff to list eventually, mostly CJ2A, WWII MB & GPW stuff. |
| Wheel Cylinders $40 |
| https://www.facebook.com/share/1DKeYEmWAy/ |
| CJ2A Steering Bell crank< $35 & Tie Rod Assemblies< $35, or $60 All |
| https://www.facebook.com/share/1AdHFRKXgL/ |
| Oil Filter Housing $50 |
| https://www.facebook.com/share/184yoo6cBH/ |










































































