| 1946 Jeep CJ-2A $7,500 Murfreesboro, TN |
| INFORMATION FROM SELLER: |
| 1946 Jeep CJ2A runs and drives great! It has the original go devil 134 engine and three speed transmission. It does not smoke or burn oil, it is a good healthy, strong engine. This is a project I’ve been working on the last couple of years. I’ve gone through the body completely, it has all new paint. My goal was never to make it completely perfect but to have a good representation of a 1946 Jeep. It could use a few odds and ends if you were wanting to really bring it up to total restoration quality. It needs nothing the way that it sits. I made a list of some of the repairs in new parts that are on it. I also have some of the old parts that go with it like the original 6 V generator, original windshield wiper , original heaters that go under the dash, and a bunch of other odds and ends. I went through the transmission and transfer case last summer. I ended up replacing about 90% of the gears, all of the bearings and synchronizers, they are mostly new parts inside. I am not interested in lowball offers or trades. If you’re looking for an old jeep, this one is solid. New tires and inner tubes Refurbished wheels New shackles New exhaust from the manifold back Rebuilt, transmission, and transfer case New gas tank Rebuilt carburetor New spark plugs, distributor cap plug wires, and points. New water pump New radiator hoses New exhaust manifold gaskets 12 V conversion New wiring through the whole vehicle New gauges New soft brake lines New windshield to body rubber gasket New Besttop low back seats And a bunch of other odds and ends that I’m sure I’m forgetting. |
| https://www.facebook.com/share/1FpDjbSkDo/ |
CJ-2A Research Archives
1947 CJ-2A with 230_OHC Tornado Swap $2,500 Craig, CO
| 1947 CJ-2A with 230_OHC Tornado Swap $2,500 Craig, CO |
| This is way cool for any 230 folks, really neat set up. Would be great to add this to the collection, price is right just transport would kill the deal. |
| INFORMATION FROM SELLER: |
| For Sale or trade for complete running L134 Hurricane. I have a 1947 CJ 2A with clear Colorado title and matching data plate. This Jeep has a running 230 cubic inch Jeep Tornado 6 cyl engine and Warn overdrive. No seats, no steering wheel or gas tank otherwise it’s complete. Tub and body in decent shape, but floor has usual rusting 11x32x15 tires have nearly new tread on cyclone wheels. Asking $2,500.00 as is, may consider trade for complete, running L134 Hurricane, or possibly parting it out. Located in Craig Colorado. |
| There is no direct link for this one, Andy shared it with me, its inside a FB Group |
1948 Willys Salad $3,500 Lucas, IA
| 1948 Willys Salad $3,500 Lucas, IA |
| INFORMATION FROM SELLER: |
| CJ2A No brakes Runs and drives No coolant |
| https://www.facebook.com/share/1AAqEQj1cG/ |
Barney’s Jeep Parts Vendor Spotlight
Barney’s Jeep Parts Vendor Spotlight
Spring is here and a lot of us are getting our projects out and about.
There are so many great Willys / Jeep vendors that support our community I would like to share a few to put them back at the top of the list.
Barney has a lot of Jeep parts listed up on eBay some really great stuff. Please head over to their page and look around I’m sure you will find something you could use for your project. Some nice finishing touches as well that you may not know you could use one of those! Don’t see exactly what you need let him know what your in need of.
Link’s to eBay Store:
Barney’s Jeep Parts

Here are a few examples
FITS JEEP 1955 – 1968 CJ5 CJ6 DJ5 DJ6 F4 17″ RADIATOR 908028 BRASS AND COPPER

HOSE KITS, MULTIPLE OPTIONS VARIOUS MODELS




1940’s CJ Willys Jeep $4,000 Eagle Creek, OR
1947 Jeep Willys CJ-2A $7,000 Yreka, CA
| 1947 Jeep Willys CJ-2A $7,000 Yreka, CA |
| INFORMATION FROM SELLER: |
| 1947 Willy’s cj2a. Freshly rebuilt 134 flat 4 engine. Rebuilt transmission, T-case and axles. Saginaw steering box. Converted to 12v with blinkers. Removable rear seat. Runs and drive like an old jeep. Have the title, ready to go. Asking $7000 |
| https://www.facebook.com/share/1CYniD9GEH/ |
1947 Willys Jeep CJ-2A Body $1,800 Bismarck, ND
| 1947 Willys Jeep CJ-2A Body $1,800 Bismarck, ND |
| INFORMATION FROM SELLER: |
| Body, hood, grill , tailgate, fenders and windshield frame I do have a rolling chassis that I would possibly sell also if interested |
| https://www.facebook.com/share/1KAbn9MQXo/ |
1947 Willys Jeep Custom $6,500 Draper, UT
| 1947 Willys Jeep Custom $6,500 Draper, UT |
| INFORMATION FROM SELLER: |
| This is a custom build. It have a 1947 Willy Jeep on a 1997 Chevy S10 Blazer. It has the 4.3 v6 engine. Auto trans. It’s has 456 gears. Power steering. Power brakes. Front axle has lockers. Rear axle has pozzy track. Has a 10 ton wench on front. Engine and transmission run great. I bought this from my uncle to help out. Message with questions. Asking $8000. Open to reasonable offers. |
| https://www.facebook.com/share/187e335uts/ |
1946 Willys Jeep CJ-2A $900 Boise, ID
| 1946 Willys Jeep CJ-2A $900 Boise, ID |
| INFORMATION FROM SELLER: |
| 1946 Willys Jeep cj2a. Body sitting on fc150 frame (similar to cj5). Has f-head 134 engine that cranks and sounds good. Has side shift t90 and Dana 18 t-case. Has Dana 44 rear axle. No front axle, no title. Rear wheels and tires not included. Will not respond to “is this still available” will sell engine/trans/tcase $600, tub $300, frame and rear axle $150 |
| https://www.facebook.com/share/1HE265maNC/ |
1946 Jeep Willys CJ-2A $500 Palmer Lake, CO
| 1946 Jeep Willys CJ-2A $500 Palmer Lake, CO |
| INFORMATION FROM SELLER: |
| Willy’s project. Lots of good parts, body tub I has rust, drivetrain is there, but condition is unknown. Bill of sale only. On the side of a hill, will need a small tractor or atv to pull it out. |
| https://www.facebook.com/share/1EsjYgoWMB/ |








































































