emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
This may be worth a look.
“1949 BODY AND BOXED FRAME. WHAT YOU SEE IS WHAT YOU GET.. ANY QUESTION TEXT OR CALL AT 36O-5TWO4-ONE897 **NO EMAILS – NO SCAMMERS**
THE FRAME WAS BOXED AND DONE THE RIGHT WAY WITH ADDITIONAL REINFORCEMENT ON THE FRONT BUMPER AS WELL.. GREAT START TO A PROJECT OR REPLACE YOUR OLD RUST BUCKET.. FRONT CLIP IS ONE PIECE AND FLIPS FORWARD.”
http://portland.craigslist.org/clk/pts/3178985580.html
There looks like some value here. It’s even capable of holding up a concrete block, though why it’s holding the block less understood.
“This is for parts. Price may be negotiable. CASH ONLY”
http://stlouis.craigslist.org/cto/3179202417.html
UPDATE: Price dropped to $3000
(01/25/2011) I can’t tell much from the pic.
“1947 JEEP WILLYS. PRIMER RUNS GREAT. 289 FORD MOTOR SMALL BLOCK V8. 6 INCH LIFT 35″ BFGOODRICH TIRES. NEEDS BRAKES. ALSO HAVE 37″ BOGGERS WITH LESS THAN 50 MILES ON THEM BUT THE PRICE WITH BOGGERS IS 3500 FIRM OR 3000 OBO WITH 35″ TIRES. THE BODY HAS SOME BONDO BUT IS IN PRETTY DECENT SHAPE FOR A 1947 WHEELIN RIG. HAS A 3 SPEED MANUAL TRANNY. 9000 LB WINCH ON FRONT. EVERYTHING WORKS GREAT EXCEPT BRAKES. HAS A NEW MASTER CYLINDER ON IT JUST NEEDS SOME TUNING ON BRAKES AND BLEED LINES. PLEASE TEXT IF INTERESTED AT 425 269 9519 OR EMAIL ME. I WONT B ABLE TO ANSWER PHONE CALLS SO PLEASE TEXT OE EMAIL ONLY. THANKS”
http://seattle.craigslist.org/est/cto/3180591336.html
UPDATE: **SOLD** Was $3200.
(07/21/2012) I knew something looked odd about this. After a couple moments I spotted the problem. This actually has bow holders installed in the bow holders! How often do you see that in a jeep, other than a perfectly stock show jeep? If those are the original bow holders, then the seller deserves some kind of medal.
“I have a 1947 Willys Cj2a for sale. It has the original 4 cylinder with a 2.5 lift. 33 inch tires and full soft top. I have the overhaul kit for the transfercase and transmission(over 400 dollar value). The syncros are bad but the jeep does drive.”
UPDATE: **SOLD** Was $4500.
You’ll need a passenger side panel at the very least. This appears to be a mix of parts.
“Well the last time this willys ran was 1996,I wanted to build it up 1. rblt a 231 buick,edelbrock performer manifold,390 holly 4bbl,msd high performance distribtor,headers,4core radiator,new fueltank
2.t15 syncro 3spd new bearings and seals new flywheel/clutch
3.dana 20 t-case new bearings and seals
4.front rblt dana 30 stock width 5.38 gears new 11″brakes f/r
5. rear rblt dana 44 stock width 5.38 gears/detroit locker
6.saginaw manual steering box
7.4″ lift re arched springs f/r
8. old 32-11.50×15 bfg mud t/a 1982 cj7 rims
Wife wants it gone and I havent touched it in 13 years.
what it needs to get finished,
1.damaged rocker panel cut out and stock replacment welded in
2.nice storage box welded in
3. needs all brake lines & hoses
4.needs battery and batt box
5.wiring is all there but needs hooked up
Super nice body not rusted out, bodywork and paint are in good shape, seats are good and have pass seat and rear bench.
This willys is a 1943 ford gpw with a cj3a body and windshield,it needs alot of work and alot of fit&finish but has alot of potintial
and a great 4wheeler.I think its well worth my 4500$ asking price
email with willys in the subject line please.
Sold as is where is with no warrantys or garanties,must be hauled away I have a title.”
UPDATE: Price dropped to $2500
(04/29/2012) Looks solid.
“1947 Willys jeep 4×4. Has 60’s Mustang 289 V-8.
Runs good. Clean NM title.
$2700. cash/no trades.
321-7380”
http://albuquerque.craigslist.org/cto/3176472840.html
UPDATE: Was $3400. **SOLD**
(06/28/2012) The more I looked at the paint job the more I kind of liked it. The steering column is installed pretty low. I imagine you’ll really have to squeeze to get into the driver’s seat.
“1948 CJ Willys Jeep Fiberglass body, Buick V6, Four speed, Posi rearend, new seats, new gauges, new stearing collumn(turns easly), rewired,95% finished, Street legal. Serious buyers only. 4,800 obo or let me know what you have to trade.”
UPDATE: Price dropped to $1500.
(04/07/2011) “Original willys cj2a 4×4! Please call 5039289209 must sell!!! ”
http://portland.craigslist.org/clc/cto/3177264622.html
UPDATE: **SOLD** Was $5000.
Lots of work left here. I’m not sure where those side roll bars are heading.
“1946 willys jeep on 1974 running gear 304AMC 3 speed custom frame and body work needs to be finished 5000.00 takes it home.”
UPDATE: Still Available
(10/27/2011) Looks nice.
“This is a 1946 (Flat Fender) Civilian Jeep CJ 2-A the last civilian model manufactured and sold in the United States. These are hard to find and “Junk” types are being listed for sale at $3000.00 and up. Mine is in good driveable condition and can be seen at my home in Escondido.Cell phone # 760-445-2017.”
http://sandiego.craigslist.org/nsd/cto/3176212765.html
