UPDATE: **SOLD** Was $4500.

This appears to have a Warn OD.   I’m thinking it needs LOTS of TLC to be “Show Room”.

“RUNS GREAT WILL NEED A LITTLE TLC TO BE SHOW ROOM. DRIVE IT HOME CLEAR TITLE.”

UPDATE:  Price dropped to  $3000

(01/25/2011) I can’t tell much from the pic.

“1947 JEEP WILLYS. PRIMER RUNS GREAT. 289 FORD MOTOR SMALL BLOCK V8. 6 INCH LIFT 35″ BFGOODRICH TIRES. NEEDS BRAKES. ALSO HAVE 37″ BOGGERS WITH LESS THAN 50 MILES ON THEM BUT THE PRICE WITH BOGGERS IS 3500 FIRM OR 3000 OBO WITH 35″ TIRES. THE BODY HAS SOME BONDO BUT IS IN PRETTY DECENT SHAPE FOR A 1947 WHEELIN RIG. HAS A 3 SPEED MANUAL TRANNY. 9000 LB WINCH ON FRONT. EVERYTHING WORKS GREAT EXCEPT BRAKES. HAS A NEW MASTER CYLINDER ON IT JUST NEEDS SOME TUNING ON BRAKES AND BLEED LINES. PLEASE TEXT IF INTERESTED AT 425 269 9519 OR EMAIL ME. I WONT B ABLE TO ANSWER PHONE CALLS SO PLEASE TEXT OE EMAIL ONLY. THANKS”

http://seattle.craigslist.org/est/cto/3180591336.html

UPDATE: **SOLD** Was $3200.

(07/21/2012) I knew something looked odd about this.  After a couple moments I spotted the problem.  This actually has bow holders installed in the bow holders!  How often do you see that in a jeep, other than a perfectly stock show jeep?  If those are the original bow holders, then the seller deserves some kind of medal.

“I have a 1947 Willys Cj2a for sale. It has the original 4 cylinder with a 2.5 lift. 33 inch tires and full soft top. I have the overhaul kit for the transfercase and transmission(over 400 dollar value). The syncros are bad but the jeep does drive.”

UPDATE: **SOLD** Was $4500.

You’ll need a passenger side panel at the very least.  This appears to be a mix of parts.

“Well the last time this willys ran was 1996,I wanted to build it up 1. rblt a 231 buick,edelbrock performer manifold,390 holly 4bbl,msd high performance distribtor,headers,4core radiator,new fueltank
2.t15 syncro 3spd new bearings and seals new flywheel/clutch
3.dana 20 t-case new bearings and seals
4.front rblt dana 30 stock width 5.38 gears new 11″brakes f/r
5. rear rblt dana 44 stock width 5.38 gears/detroit locker
6.saginaw manual steering box
7.4″ lift re arched springs f/r
8. old 32-11.50×15 bfg mud t/a 1982 cj7 rims
Wife wants it gone and I havent touched it in 13 years.
what it needs to get finished,
1.damaged rocker panel cut out and stock replacment welded in
2.nice storage box welded in
3. needs all brake lines & hoses
4.needs battery and batt box
5.wiring is all there but needs hooked up
Super nice body not rusted out, bodywork and paint are in good shape, seats are good and have pass seat and rear bench.
This willys is a 1943 ford gpw with a cj3a body and windshield,it needs alot of work and alot of fit&finish but has alot of potintial
and a great 4wheeler.I think its well worth my 4500$ asking price
email with willys in the subject line please.
Sold as is where is with no warrantys or garanties,must be hauled away I have a title.”

UPDATE:  Price dropped to $2500

(04/29/2012) Looks solid.

“1947 Willys jeep 4×4. Has 60’s Mustang 289 V-8.
Runs good. Clean NM title.
$2700. cash/no trades.
321-7380”

http://albuquerque.craigslist.org/cto/3176472840.html