CJ-2A Research Archives

CJ-2A, cj2a

To Top

1948 CJ-2A Missoula, Mt **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500.

Hard to tell much from the pic.

“You are looking at a 1948 Willys Jeep CJ2A The body has been rhino lined inside and out and does not look bad. Problem with the rhino lining is they also did the dash and other areas that probably should not have been done and although very well protected I think it would look better if these areas had not been done. The engine is a Ford 5.0L, 302ci with a Carter ASM 750 CFM Carburetor. The block casting number shows it is a 69-73 before they were detuned and the compression lowered due to emissions, when a muscle car was still a muscle car. I have rebuilt the carburetor, timed it and done a full tune up. It runs good with all the power you might need and it will smoke all four tires if you want.
I am pretty sure that the transmission, three speed, and drive train are original. The clutch works well, it shifts fine and the 4 wheel drive works fine. Most of the underneath has been redone and is new including springs, shocks, tie rods, etc. There is approximately a 2 inch lift on the spring shackles that you can see in the picture of the rear end. Everything else looks pretty much stock. ”

 

[fb_button]
 
To Top

1948 CJ-2A Knoxville, Ia **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2000

(04/19/2012) This runs, but is rough.

“For Sale:
1948 Willys Jeep
Snowblade with Hydrolic lift
Good motor and drivetrain
Runs great – looks rough!
Homemade hard top
We have been using it to push snow on 4 driveways for several years
Great little machine!”

 

[fb_button]
 
To Top

1949 CJ-2A Militarized Emmaus, Pa eBay

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

This looks to be a solid jeep.

“Rumor had it this Jeep was used in a few movies back in the day (anyone say: Kelly’s Heroes). The previous owner bought it and planned to restore it, after many years he was ready to let it go. He had rebuilt the Engine and put in a new Radiator, and converted it to 12 Volt system with Alternator. We bought it in this condition, pretty much “rust-free” but with a few dents and dings (Jeep in Dark Green-white wheels). We CHOSE to leave that, so it looked more like a Combat (Field) Jeep – not a “SHOW” JEEP!”

View all the pics and info here

[fb_button]
 
To Top

1946 CJ-2A Montesano, Wa $2000

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

According to the seller, “no modifications have been made on this jeep“.  I count at least 21 modifications (not counting the tires).   That said, the body looks pretty good.

“This jeep has been garaged except the last the few months. Had to do some remodleing in my garage. There is little surface rust in a few spots nothing major. Role bar in back, snap on soft top. Small rust hole on passager side floor board. ENGINE NOT RUNNING, This jeep is in great shape considering the year it is made. Reply to this or call 360-249-4063. Ask for Kurt
Thanks for looking. This jeep wouldn’t take much to fix up nice if you have time and money that I don’t have. This jeep is all original from 1946, no modifications have been made on this jeep. There is not speedometer in the jeep, there never has been so I have no idea how many miles are on it, it the second engine that has been put in it.  Asking $2000.00 for it, title in hand.”

http://seattle.craigslist.org/oly/cto/2951378867.html

[fb_button]
 
To Top

1947 CJ-2A Thurston, Or $2900

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

This runs, but does need a little work.  Might be worth a look.

“1947 Jeep Willys
– no rust
– runs
– power steering
– Windshield frame & glass mounted (not pictured)

Needs a couple things to be finished but can be test driven. Lots of new parts & extra parts.

Will trade for family fishing/lake boat.

$2900 obo Five415131864, please no email. Need it gone.

http://eugene.craigslist.org/cto/2964975039.html

[fb_button]
 
To Top

1946 CJ-2A New Hampshire $1300

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

The front frame rails look pretty good.

“Testing the waters about selling this project Jeep. Mostly stock except for having the later model flat head 6. Had it running over the winter. Bill of sale only, not title. Sold as is cash only.Emails need to have Flatty in the subject or I won’t respond due to spam.”

http://nh.craigslist.org/cto/2966229090.html

[fb_button]
 
To Top

1948 CJ-2A Bobcat Mt. Rainier, WA **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: This is supposed to be Fred Weis’ first Bobcat fiberglass body. **SOLD** Was $5500.

“1948 Willys Flatfender Jeep with Bobcat fiberglass body. It has a 327 small block chevy, T18 ford 4 speed, model 20 t-case, dana 44 with 1-ton chevy locking hubs in the rear, dana 30 with open knuckles in the front, warn winch in the front, 33″ MTR tires. It runs and drives good and has great working heat. Previously it had been in storage since 1981, but is back on the road and now has current tabs. This jeep is super fast and comes with lots of extra parts. Serious buyers only; might consider possible partial trades.
$5500”

[fb_button]
 
To Top

1948 CJ-2A Project Wichita, Ks **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1000

(02/28/2012) It’s a project.

“I’m selling my 1948 Willy’s Jeep resto-mod project. School has limited my availability to continue to work on this project so I’m selling it with 2 motors, and an ORIGINAL hard top
-1948 Willy’s cj2a
-s10 Frame
-early 90’s 4.3L
-2001 vortec 4.3L
-Dana 30 front and rear
-Power steering and brakes
-Hard Top
I have the body and the tub already separated for you so you don’t have to. I’m not trying to make a lot off this, I Just want someone who will finish it to buy it. So make me a reasonable offer.”

[fb_button]