UPDATE: **SOLD** Was $6100.
(03/10/2017) Has some updates.
“1951 jeep willys current reg runs great has 327ci holley 4 barrel aluminum radiator with Muncie manual trans body lift 33″tires”
UPDATE: **SOLD** Was $6100.
(03/10/2017) Has some updates.
“1951 jeep willys current reg runs great has 327ci holley 4 barrel aluminum radiator with Muncie manual trans body lift 33″tires”
UPDATE: Price dropped to $3200.
(04/02/2017) Runs and drives.
“Running and driving 1947 Willys Jeep. Clean and clear Kansas title with a matching ID plate. Great to enjoy the spring and summer or use for your deer lease or farm!
– new distributor cap, rotor, spark plug wires, spark plugs.
Points and Condenser removed and upgraded to electronic ignition.
-New hi-torque starter
-Headlights work.
The LED tail lights and brake lights work, but aren’t currently wired.
-Smokes a little at start up then reduces when warmed up.
-The driver side wheel well has been notched to allow the driver’s seat to be pushed back. This is for all the guys with a rotund torso to be able to fit in comfortably, or long legs. I’m 6′ and my legs are fully extended and it sets very nicely.
-Windshield glass is good (no cracks) and the windshield pivots down onto the hood bumpers.
-The floor under the tool box could be patched or leave as is.
– A rare heater is installed if you ever put a top on it, and the fan does blow.
– Front tow bar is installed and it pulls very well. Bring a 2″ ball and pull it home or drive it.
Great jeep to drive as is or fix it up!”
UPDATE: **SOLD** Was $9900.
(03/25/2017) Has a variety of updates.
“Very nice 1948 CJ2A with 1963 Buick V-6, std 3-spd with Warn overdrive, 11 inch brakes, pwr steering, no rust ever.”
UPDATE: **SOLD** Was $1650.
This 2A appears to have an Econo-body type “H” Porter & Reed top.
“1948 Willys CJ-2A ‘project’ Jeep…runs, shifts, yard drives…4WD works…original flat head motor…still all 6 volt system…original windshield, seats, aluminum 1/2 cab…frame is straight + solid…front frame horns in nice shape…body kind of rusty for a restoration, but could be a decent driver…some tin patches done…needs exhaust, brake, body work, etc…asking $1650…Vermont does not issue titles for older vehicles, sold with bill of sale…”
It’s a 2A body that the seller has modified to look more MB/GPWish.
“I have a 1946 willys cj2a. It is a very good jeep, in good shape, and runs good. It was rusted and full of big holes when I got it. I spent a lot of time repairing, I cut out the holes, and welded in new steel. This jeep didn’t come with a glove box, I built one for it. It has the four cylinder hericaine engine that is real strong. And Dana 18. This is a civilian jeep, so it had a taile gate, but I was converting it to a 45 military, so I put in the solid rear panel. I only put it in one car show, and won 2nd place. That might have just been because of the gun. I don’t need to sale the jeep, I just don’t do anything with it anymore. I hate to see it not being used. I want someone new to enjoy it like I have. The browning 1919a4 that mounts to it, I have it in semiauto belt fed. I don’t want to sale it, but if the offer is good I will let it go with the jeep. I might be willing to trade for guns, or a jeep wrangler. $8,000 is just an opener, call me, let’s deal.”
<a href=”https://houston.craigslist.org/cto/6072928678.html” target=”_blank”>https://houston.craigslist.org/cto/6072928678.html</a>
<a href=”http://www.ewillys.com/wp-content/uploads/2017/04/1946-cj2a-houston-tx1.jpg”><img class=”aligncenter size-full wp-image-283827″ src=”http://www.ewillys.com/wp-content/uploads/2017/04/1946-cj2a-houston-tx1.jpg” alt=”1946-cj2a-houston-tx1″ width=”336″ height=”450″ /></a> <a href=”http://www.ewillys.com/wp-content/uploads/2017/04/1946-cj2a-houston-tx2.jpg”><img class=”aligncenter size-medium wp-image-283828″ src=”http://www.ewillys.com/wp-content/uploads/2017/04/1946-cj2a-houston-tx2.jpg” alt=”1946-cj2a-houston-tx2″ width=”336″ height=”450″ /></a> <a href=”http://www.ewillys.com/wp-content/uploads/2017/04/1946-cj2a-houston-tx3.jpg”><img class=”aligncenter size-medium wp-image-283829″ src=”http://www.ewillys.com/wp-content/uploads/2017/04/1946-cj2a-houston-tx3.jpg” alt=”1946-cj2a-houston-tx3″ width=”336″ height=”450″ /></a> <a href=”http://www.ewillys.com/wp-content/uploads/2017/04/1946-cj2a-houston-tx4.jpg”><img class=”aligncenter size-medium wp-image-283830″ src=”http://www.ewillys.com/wp-content/uploads/2017/04/1946-cj2a-houston-tx4.jpg” alt=”1946-cj2a-houston-tx4″ width=”336″ height=”450″ /></a>
It’s a 2A body that the seller has modified to look more MB/GPWish.
“I have a 1946 willys cj2a. It is a very good jeep, in good shape, and runs good. It was rusted and full of big holes when I got it. I spent a lot of time repairing, I cut out the holes, and welded in new steel. This jeep didn’t come with a glove box, I built one for it. It has the four cylinder hericaine engine that is real strong. And Dana 18. This is a civilian jeep, so it had a taile gate, but I was converting it to a 45 military, so I put in the solid rear panel. I only put it in one car show, and won 2nd place. That might have just been because of the gun. I don’t need to sale the jeep, I just don’t do anything with it anymore. I hate to see it not being used. I want someone new to enjoy it like I have. The browning 1919a4 that mounts to it, I have it in semiauto belt fed. I don’t want to sale it, but if the offer is good I will let it go with the jeep. I might be willing to trade for guns, or a jeep wrangler. $8,000 is just an opener, call me, let’s deal.”
UPDATE: **SOLD** Was $1800.
Doesn’t run.
“48 Jeep Willys. Great project car! 283 chevy (currently not running and will need some work).”
It’s a roller.
“First year in full production, have original motor/trans/xfer case, vehicle is 95% complete, have everything except some of the electrical. The engine turns freely, the window glass is good, the original seat frames are in good shape. I have all new brake hardware. The trans needs a full rebuilt and transfer case needs some of the gears replaced. Won’t take a lot of $$ to put together, just a lot of time, which I don’t have. Clear title, currently PNO, no back fees.”
Steve shared this oddity.
“Original flat 4 engine and drive train, bran new BF goodwrench 35″ tires. Needs wiring and brakes bled. This is a one of a kind nice project! Clean title in hand. Call or txt. Txt during the week as I work all day and cannot answer calls.”
UPDATE: **SOLD** Was $2000.
If all this needs is wiring, it could be worth a look.
“jeep cj2a for sale. needs wiring harness.”
Has lots of updates.
https://boise.craigslist.org/cto/6074602872.html
“This Classic Jeep has been meticulously maintained and driven very little. There is over $46,000 invested in upgrades to this Jeep, and it is ready for off road/camping/hunting/rock crawling fun!
Package includes:
383 pro built SB Chevy engine (built in Boise)
W/4 barrel carb
4 speed tranny
Tilt wheel steering
Full roll bar
Front bucket seats – rear full seat
5 point safety harnesses
On board compressor
Painted “porche red” w/ black top
9500# Warn Winch w remote
AM/FM/CD player and CB radio Continue reading
UPDATE: Still Available.
(03/16/2017) Looks good. Has a variety of updates.
“Buick V6 225, Power steering, Lockers Front and Rear, Hydraulic winch, Tow Bar, Bikini Top, and Full Top. Chevy Transmission four speed and transfer case. Tilt Wheel, custom dash, two fuel tanks. New tires and wheels. Box of Parts and rear seat. Electric Wipers.”