CJ-3A Research Archives

CJ-3A, CJ3a

To Top

1950 Jeep Willys CJ-3A $7,500 Farragut, TN

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
1950 Jeep Willys CJ-3A $7,500 Farragut, TN
Spring will be here soon enough, lots listed on this one. Unfortunately the Winch is not included on this one. Not sure on the extra holes in the dash, will need some things addressed, but looks like it might be worth a ride over if in the market and local.
INFORMATION FROM SELLER:
For sale or for trade FS/FT

I’m thinking of selling or trading my Willys Jeep.  It runs, drives, shifts and stops.  Currently registered,  titled, and tagged. I drive it several times a week. Here are the details:

1950 Willys CJ3A
Buick V6
Warn locking hubs
Saginaw power steering
Bestop soft top and doors (2024)
Rough country wheels (2024)
31×10.5×15” MT tires (2024)
Backseat
*Warn winch NOT included”
Paint is good from far, but far from good.
Some
New gauges

Extra parts that can be included:

Full set of stock wheels
Half doors
Hood
Recently rebuilt transmission and transfer case (was supposed to be a winter project)
Fuel lines
Carb rebuild kit (was also supposed to be a winter project)
Fuel pump
Alternator
Master cylinder
Brennan’s brake kit
– Samari calipers to go with the kit
Radiator hose
T-case knobs
Hood latches

I may look at consider trades, but no boats or RVs.

https://www.facebook.com/share/1CFQSv96QY/

[fb_button]
 
To Top

1952 Jeep Willys CJ-3A $1,700 McLouth, KS

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
1952 Jeep Willys CJ-3A $1,700 McLouth, KS
Project, but would be a great come back story. Rear bumper is stout!
INFORMATION FROM SELLER:
Old Willy’s. Make offer. No trades UPDATE NO TITLE

Selling for a buddy, it dis not run, no floor pans, this is a massive project.

https://www.facebook.com/share/1DjTq6RBHp/

[fb_button]
 
To Top

1951 Jeep CJ-3A $3,000 Lufkin, TX

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
1951 Jeep CJ-3A $3,000 Lufkin, TX
Willys Salad
INFORMATION FROM SELLER:
1951 CJ3A

Runs and drives. Brakes don’t work, will need all new lines.

It’s a hodgepodge. Part 3A, part early 5, 2A windshield, M38 front axle.

Great beater/deer lease ride.

Located in Lufkin Tx.

Clean title in hand.

https://www.facebook.com/share/1ChftFJDCC/

 

[fb_button]
 
To Top

Willys CJ-3A Square Fender $3,000  Cape Girardeau, MO

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
Willys CJ-3A Square Fender $3,000  Cape Girardeau, MO
I liked the description so I left it, looks like a 3A to me anyway. I’m going by the seat frames and key location on the dash. But let me know if I’m off base. Full project here.
INFORMATION FROM SELLER:
Did run recently. I personally haven’t started it yet but it’s been cold and I’m not sure how to crank it. Looks like the engine has been overhauled. Come check it out.
https://www.facebook.com/share/1AEKz5d2Ga/

[fb_button]
 
To Top

1952 Jeep Willys CJ-3A$3,000 Marion, IL

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
1952 Jeep Willys CJ-3A$3,000 Marion, IL
I have this as a CJ-3A, it’s a project rig, has some work started.
INFORMATION FROM SELLER:
Not the best but not the worst would be a good run around buggy. Has a ford 200 inline six with a new carb that does run, and a rebuilt t-90 3 speed. The brakes work. The tub and frame are in decent condition considering the age of this rig . To make the clutch work I need the Novak adapters for the transmission. I don’t feel like spending anymore money on it. If you want a project that’s almost finished look no further. NO TRADES just cash.
https://www.facebook.com/share/1GEhCcAMNo/

[fb_button]
 
To Top

1950 Willys CJ-3A $16,500 Mt Juliet, TN

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
1950 Willys CJ-3A $16,500 Mt Juliet, TN
Pretty neat CJ looks like It a fun rig to cruise around in.
INFORMATION FROM SELLER:
1950 Willys CJ-3A – Clear Title

Well-maintained CJ-3A with extensive mechanical restoration. Built to be driven and enjoyed—not a 100% original restoration.

ALL INFO IN PICTURES

https://www.facebook.com/share/1C8UcznRGj/

[fb_button]
 
To Top

Willys Jeep Parts Everything $200 Raleigh, NC

• CATEGORIES: CJ-2A, CJ-3A, Parts This site contains affiliate links for which I may be compensated.
Willys Jeep Parts Everything $200 Raleigh, NC
INFORMATION FROM SELLER:
1 BRAND NEW not even unwrapped passenger seat frame (Seat 20.5inx14in, back is 18inx18in)
-4x wheels and tires Tube Type 6.50-16
-2 Axles: Dana 25 Front, Spicer 23-2 Rear 538 gearing (internals spin, no hubs on Dana 25)
-Transmission & Transfer case for a column shift
-Steering component for column shift
-Misc parts as shown

Sale is “as is” and all together. Must come pick up.

https://www.facebook.com/share/18AoKJydeh/

[fb_button]
 
To Top

Willys CJ-2A to M-38A1 Axles $200 Janesville, WI

• CATEGORIES: CJ-2A, CJ-3A, CJ-3B, M-38, Parts • TAGS: This site contains affiliate links for which I may be compensated.
Willys CJ-2A to M-38A1 Axles $200 Janesville, WI
Spare axles. Maybe someone can narrow these down to what they will fit, or maybe tey will fit what they posted?
INFORMATION FROM SELLER:
This is a pair of 1946 to 1960 cj2 or mb38-a1 willys jeep axles in good shape. $200.00. For the pair. Use for jeep replacement or DIY project. Thanks
https://www.facebook.com/share/19xdmRdEs1/

[fb_button]