UPDATE: **SOLD** Was $3000.
Unclear what the body looks like (if there is a body).
“Clean complete drivetrain -with title a lot of work done .Transmission -transfer case ,ujoints $3000 or best offer”
UPDATE: **SOLD** Was $3000.
Unclear what the body looks like (if there is a body).
“Clean complete drivetrain -with title a lot of work done .Transmission -transfer case ,ujoints $3000 or best offer”
UPDATE: **SOLD** Was $6500.
(01/09/2020) This jeep has some mods and has been partially refurbed.
“1949 jeep CJ3A. Jeep has been completely restored including the warn overdrive. Motor, trans, front differential, rear differential, transfer case it has all been redone. I also have an original metal top that goes with it plus some other spare parts. Jeep sat in a building since 1979. It has been professionally tuned by a local shop. The fuel system, the brake system and the cooling system have all been gone through this jeep runs and drives amazingly It is in excellent condition”
UPDATE: Price dropped to $6500.
(02/18/2020) This chassis has a approx 1957 (based on the KS 0-9 speedo) DJ-3A convertible body, windshield, and front clip (or at least the grille) on it.
https://sandiego.craigslist.org/csd/cto/d/santee-willys/7095134936.html
“Willys Jeep restored frame off. Fresh v-6 too very clean 8000 or best offer new tires. Please no emails due to scammers texts are fine. Real nice condition”
Due to the mods, I am not sure how much value is here.
https://phoenix.craigslist.org/cph/cto/d/phoenix-jeep/7094023520.html
“Rock crawler sand jeep
6 liter chevy motor with custom headers
Front axle : Dodge Dana 44 thick wall housing with ARB and crome molly axles
Transmission is turbo 400 with motor home gears : shift pattern is reverse
Dana 300 transfer case, 4 to 1 low range also original gears and twin stick
Ford 9 inch with Detroit locker and 40 spline axles, case is all aftermarket
4 wheel disc brakes with duel master cylinders
The Jeep has not run in several years and needs some TLC”
Runs and drives.
https://denver.craigslist.org/cto/d/fort-collins-1951-willys-jeep-cj-3a/7096331297.html
“1951 Willys CJ-3A Jeep
Good original condition. Starts and runs well.
134 CUIN Flat head engine
3-speed transmission with Warn Overdrive
HI/LO range (two lever)
12-volt generator conversion
tow bar
Newer Besttop top and full doors
seats in good condition
Colorado title in my name
Asking $6000 OBO”
Has a few mods.
https://kansascity.craigslist.org/for/d/kearney-1953-willys-jeep-cj3a/7087866788.html
“1953 Willys Jeep CJ3A
All new brakes
$400 in extra parts”
No pics provided.
https://austin.craigslist.org/snw/d/west-point-jeep-parts/7091091266.html
“1950 CJ3A Rolling Chassis with Jeep F161 6 cylinder engine. Good grill. usable fenders and hood, body junk! No title. Comes with an extra L134 engine, two good L134 heads, 2 repairable CJ5 fenders, two military Jerry can holders,one bell housing, one red Jerry can, one heavy duty brush guard, one extra Jeep wheel, one radiator with a good copper core (fits pickup or wagon)and boxes of gears, shafts, speedometer heads, one T84 shift plate,one mirror assembly, and several buckets of bolts, nuts, and small parts.
This Jeep was to be my next rebuild, but at 79 years old, I decided to clean house and give it up. Most of the parts are an accumulation of parts from Jeeps that I restored over the last 50 years.Two of my Nephews have Jeeps that I passed along to them. One is a 67 CJ5 with a V6 engine and is for sale for $4500.00 and the other is a 1942 GPW that is 85% original and is for sale for $9,000. Both run very well. Both Jeeps are in Winchester
I will consider any reasonable offer on the CJ3A and parts. The price on the GPW is firm but the 67 price is negotiable. The CJ3A and part’s price is also negotiable and will consider any reasonable offer for all of it as one package. The two flat heads sell at Kaiser Willys for $300.00 ((new) and the L134 engine block (new) is $2000.00.”
This has some early Free Lock hubs.
https://bakersfield.craigslist.org/pts/d/los-lunas-1949-willys-v8-overdrive/7089180015.html
“49 Willys CJ3A with ford V8 conversion and overdrive added. Offenhauser 4bbl aluminum intake and valve covers. Spare tire and gas can mounts. Soft top frame. Been sitting a long time, but runs, stops, and steers.”
UPDATE: Still Available .
(04/04/2015) Nice looking jeep. Front brakes currently disassembled.
https://seattle.craigslist.org/sno/cto/d/bothell-1950-willys-cj3a-flatfender-jeep/7092899656.html
“1950 Willys CJ3A Civilian Flatfender. 95% stock, Flathead 4 cyl. 4 wheel drive, stored for 20+ years, few new improvements, Koeniq “Tin Top”, half roll cage, Diamond Plate corners and steps. Willys ready for restoration back to original or modify to whatever level. Has heavy duty detachable tow bar included. Have more photos, send email address if serious restorer / collector / hunter. Vehicle has not been started in 15 years. Was running when last parked. Front brake system currently partially dissembled. $4,995″
UPDATE: Still Available.
(03/08/2020) This has a variety of CJ and Military parts. Seller also has CJ-3A parts.
https://fresno.craigslist.org/pts/d/los-lunas-1948-cj3a-built-with-gpw-parts/7089284903.html
“48 CJ3A with Ford GPW front clip and motor. Lots of GPW and Ford stamps on fenders, hood, grill, radiator, etc. Many original parts. Rust free tub. Old paint holds up well. Flathead 4 cylinder GPW engine runs perfect with no smoke and lots of power. Very nice Jeep. Clean NM title .5o5388893l. I can deliver for $350.
I also have a ton of CJ3A parts available if anybody needs anything.”