CJ-3A Research Archives

CJ-3A, CJ3a

To Top

1949 Flattie Juneau, AK $3000

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

It’s a project.

“I have a 1949 Jeep willy. It was a rebuild project that was given to me a few years ago and I have gotten pretty far but I don’t have the time to finish, and I need to get it out of the garage.

The Chase I sand blasted and Painted with POR15. It is in excellent condition.

The Engine is the original 4 cylinder, I did a complete rebuild and paint job. The two of the cylinder walls were a little rough, and she is a little smoky when running, but runs well.

The transmission I didn’t do much, new clutch, pilot bearing, and paint job.

The body was the tough part. I replaced the floor board, and tool box (under passenger seat). I went around and cut out all the rust and replaced it with fresh steal. I started the bondo and sanding process but I am out of time.

I know $3000 is a lot to ask for a rebuild project, Im hoping to breaking even. Make me an offer.”

http://juneau.craigslist.org/cto/4311117118.html

1949-flattie-juneau-ak1 1949-flattie-juneau-ak2

[fb_button]
 
To Top

1951 CJ-3A Rosburg, WA **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500

(11/01/2013) It appears solid. Looks like it runs.

“Willy’s Jeep 1951 Four banger engine, $1500 OBO,”

1951-cj3a-roseburg-or01 1951-cj3a-roseburg-or02 1951-cj3a-roseburg-or03

[fb_button]
 
To Top

1953 CJ-3A Albuquerque, NM $6750

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

Interesting carrier on the front bumper. Looks solid.

“1953 Willys Jeep CJ3A. Really nice condition. Mostly stock with various upgrades. 12 volt converted, new gages, new locking hubs, new marker and headlights, etc. Original 4 cyl flathead engine runs fine. Got to see this to appreciate it. $6750 (you can’t buy a new quad for that). More than twice that put into it. Call, email, or text Dennis at 505-273-zero-two-four-4. No scams.”

http://albuquerque.craigslist.org/cto/4310702900.html

1953-cj3a-albuquerque-nm02

1953-cj3a-albuquerque-nm03

1953-cj3a-albuquerque-nm4

[fb_button]
 
To Top

1952 CJ-3A Henderson, NV **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500.

(11/27/2013) Now disassembled. Includes overdrive.

“52 CJ3A Jeep Have new fenders for it, other new parts. Normal rust. Ran when parked many many years ago, engine turns. Overdrive & locking hubs, roll bar. It is taken apart to the frame and rebuild started. I have $2600 in this with the new parts. Have Clean Calif. Title. The pictures are when I bought it two years ago. Can get current pictures. It’s now taken apart.”

1952-cj3a-henderson-nv00

[fb_button]
 
To Top

1951 CJ-3A? Washtucna, WA For Trade

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

No pics provided.

“1951 Willys Jeep. 3spd Manual Trans, 4×4 hi/low, 4cyl. Repaired Radiator and starter. new belts and hoses. Front Seats are a little bit worn out. Brakes work but need blead every year. Two Jeeps put together in the 60’s. Best 4×4 known to man. Red color, but needs redone. Passed on from grandfather. No Need to sell but will Trade for fuel efficient car or diesel pickup. Text Levi @ 5096507099”

http://spokane.craigslist.org/cto/4303214120.html

[fb_button]
 
To Top

1949 Stainless Flattie Seattle, WA $29,500

• CATEGORIES: CJ-3A, stainless/jewels • TAGS: This site contains affiliate links for which I may be compensated.

This hasn’t been used much.

“I have owned this Willy’s for 20 years, built from the ground up……
Tub, fenders, grill, tailgate, roll bar, are in stainless steel…….the Willys features a 1957 Chevrolet 283 V8, turbo 350 transmission, Toyota transfer case, dana 44 reverse rearend, 373 gears, tilt steering, P.S., P.B.,…..With less than 3000 miles on the drivetrain, it has never been off road, just shown a few times at local car shows. Goodguys Pick/Award winner …..an incredible amount of hours and money went into this build. I have it priced well below investment. SERIOUS INQUIRIES ONLY! $29,500”

http://seattle.craigslist.org/see/cto/4308015726.html

1949-stainless-flattie-seattle-wa

[fb_button]
 
To Top

1951 CJ-3A Kim, CO $800

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $800

(08/28/2013) Has a F-head.

“1951 Jeep Willys CJ3A 4×4, have the original title. The original flathead motor was replaced with a F head motor and it does need maines and an insert bearing. Were asking $1000, if interested please email, thanks!”

http://denver.craigslist.org/cto/4306422891.html

1951-cj3a-kim-co2 1951-cj3a-kim-co3 1951-cj3a-kim-co4

[fb_button]
 
To Top

1952 CJ-3A Maili, HI **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $7500

The rollbar looks like it has been installed backwards.

“Well cared for 1952 Willys Jeep, $7,500.
4 cylinder, 4 wheel drive
New fuel system
Less than 150 miles on the tires
Includes extra parts, both new and used parts.”

1952-cj3a-oahu0 1952-cj3a-oahu1 1952-cj3a-oahu2

[fb_button]