CJ-3A Research Archives

CJ-3A, CJ3a

To Top

1953 CJ-3A Gig Harbor, WA **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $11,500.

This looks nice.

“Here is a 1953 Willy’s Jeep witha built 327 and I mean built. This thing will probably pull the front wheels off the ground. Dual exhaust, full cage and so much more.”

[fb_button]
 
To Top

1953? Flattie Sauquoit, NY **SOLD**

• CATEGORIES: CJ-3A, DJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

It runs, but is a bit odd.  The body might be from a DJ.

“I have a 1953 willys Jeep that has tons of new parts, way to many to list, this Jeep is a great running trail, farm, rig. Has been on road last three years, need to sell got to many projects.”

[fb_button]
 
To Top

Year? CJ-3A Martinsville, IN

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: Status Unknown

“we have a willys jeep hasnt been started since he rebuilt it and would like to trade for a gas golf cart or a 4-wheel drive 4wheeler”

[fb_button]
 
To Top

1953 CJ-3A Valley Center, Ca $3500

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Still Available

(04/05/2011) Looks nice.

“Off road Jeep with V-6 , winch, oversize tires, many spare parts and in good running condition. It has a military frame. Stock transmission, transfer case, front and rear diff. But the gear ratio has been changed to 4:27 and posi-traction front and rear {Powerlocks). Also installed 19 spline axles front and rear cause there stronger. Leaf springs are 3 inch lift comp springs very stiff. Engine is a 76 Buick v6. There is an adaptor between front of transmission and bellhousing. Off Road Only!  Sold as is Bill of sale only! Might trade for a travel trailer that is clean and in good shape.”

http://sandiego.craigslist.org/nsd/cto/2966172568.html

[fb_button]
 
To Top

1951 CJ-3A Bend, OR **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500

(02/16/2012) This has a cracked block, but comes with extra parts and an engine.

“1951 Willys Jeep ready to restore. Still ran when parked however has a cracked block. Comes with engine from 1952 willys ran when pulled. Lots of extra parts; gasket kit, carboraters; etc. Have been gathering parts to restore it but ran out of time and money. Good project for someone who wants an original Willys.”

[fb_button]
 
To Top

1949 CJ-3A Powell, TN **SOLD**

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $4000

(04/08/2012) This has a fiberglass body and tilt front end.

“1949 willys Cj3
In 1970s it was took to Novak Enterprises A Jeep
conversion specialiste To V8 AT & Fiber gass body
Now it has
New Paint is the original green
for the year 49
& Letting & stars

350 Chevy and 350 AT & PS, PB,

new Tranmission mount
& transfer case, axles front
and rear end in good shape
New Drive Shaft,
Hust Shilter
Headers
Electric Fuel Pump
Tilt Wheel
Back Sent, but not got the
fronts seats

New after market Wiring Harrness
All lights works Great

Tilt Frontend & Fibergass Body
All new frontend parts re condition Steering box
Tie Rods ends & new Steering Stabilizer bar
Just needs frontend line up
Bridgestone Dueler
33×12.50 R 15 LT over 500$ in tires”

[fb_button]
 
To Top

1949 CJ-3A Ludlow, MA **SOLD**

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $7000.

This looks pretty nice, so I don’t quite understand the diamond plate dash plaque.

“Here is a 1949 Willys Jeep in beautiful condition. This has had a full restoration and engine/drivetrain rebuild. If you would like more pictures or to come and take it for a test drive, please email with your number and I will get back to you ASAP. This comes with a clean MA. title. Thank You”

[fb_button]
 
To Top

1950 CJ-3A Comanche, Tx $1800

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

It goes, but doesn’t stop.  The seller gives a good description.

“Runs and has a Title! Would be a decent restoration candidate. I’ll describe the Jeep as best I can, if you have any questions, feel free to call anytime. (912) 980-7811.

I’ve owned this 1950 CJ3A for about 6 months, so I don’t know the complete history of the Jeep. But I’ve got it running decent now.

Engine: The original L-Head 134 four cylinder still resides in the Jeep and it runs pretty darn good. I’ve installed a new carburetor, new battery, new ignition components and it starts right up. The original 6V system is also still in place. The speedometer and fuel gauge do not work, I have no idea how many miles are actually on the Jeep. The odometer is stuck on 61K, which I think is probably not far off. It hasn’t been driven regularly in many years. The Ammeter, Oil pressure gauge and Temp gauge work. Oil pressure runs from 40-60 depending on RPM, Temp hovers around 180, and the Ammeter barely moves at all. Compression is a bit on the low side. The cylinders run 80, 80, 70, 70. I’ve installed a new Solex carburetor and it idles and revs nicely but it does run a tad rich, it probably needs re-jetting. Solex Carbs require 1-2 psi of fuel pressure while the stock mechanical pump puts out 3-4, so I’ve installed and adjustable fuel pressure regulator. I’ll also throw in the original Carter WO carburetor. It also retains the original starter button (stomp starter) in the floor board.

Transmission/Transfer Case: Still the original T90/Dana 18 combo. The transmission and TC will need to be gone through. They’re inherently noisy in perfect condition but this jeep’s drive train does produce a bothersome growl. But, 2wd and 4wd do work correctly. The clutch is good, I have replaced the clutch push rod. I also have spare TC and transmission parts to go with it.

The Body: The tub is in need of sheet metal work. It has the typical rust in the hat channels and the floor of the tub under the gas tank is rusted through. Otherwise its really not that bad compared to most vehicles of this age. The fenders are original and straight, the windshield frame has some surface rust. To be properly done, the windshield would need to be removed and the frame blasted or dipped for paint. I’ve wire wheeled the fenders and exterior of the Jeep and applied primer but I have not repaired any dents or rust holes. Overall, its fairly solid. The lights are not wired up. It does have decent taillights also. The best thing I can say about the seats is that they are present. The tires are a bit old and cracking but the tread is like new and they’ll be fine for the limited speed of the Jeep. I believe the original color of the Jeep is Luzon Red.

Brakes: The braking system is non-functional. But I’ve driven it on the dirt roads locally, I’ve probably put 50-60 miles on it the last few days. Its noisy, bouncy, and rugged but really fun to drive.

Steering: Lots of play!

Anyway, this would be a fun jeep to put around with on a ranch or it would be an easy restoration project for someone. I’m only selling because I’ve got other projects I need to focus on and I need to thin out my Jeep herd a little.

Price is $1800 OBO

Email or Call 912-980-7811 anytime!”

http://dallas.craigslist.org/sdf/cto/2961690320.html

[fb_button]
 
To Top

Fiberglass Tub Bobcat? Vermont $800

• CATEGORIES: CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Still Available

(04/10/2012) is a wide brim fiberglass body.  However, the distance between the top rim of the rear of the body and the wheel wells isn’t very big.  I haven’t seen one quite like this.

“I have a CJ3A fiberglass tub and fenders in good shape that I’m looking to sell. Any questions call 413-652-2616”

http://westernmass.craigslist.org/for/2963071563.html

[fb_button]