UPDATE: **SOLD** Was $450.

Could be worth a look.

“L-134 engine for 1946-1948 Willys CJ2A”

No location was provided for this engine.

“I have a MB Willys engine that was removed from a Hobart welder. I do not believe this was the engine that was in this welder originally due to the fact that it was mated to a partial Jeep bell housing to make the fit. The engine runs and still carried a load before being removed from the welder. By looking closely at area near distributor where these engines are prone to crack, I can see a professional repair was made at some time to the block (repair is barely visible and holds). Serial number behind oil filter is MB546645, casting number 638632. Boss behind water pump correct 1/2″x2″. Engine has 40-50 psi oil pressure when running and no knocks, or crank chuggle. Cold compression is 70-90 psi across the 4 cylinders, bumps up to 110-140 once the oil gets to them.”

http://www.warjeeps.com/mjs/sale16/adm523/adm523.html

UPDATE: **SOLD** Was $300.

Looks to have value.

“Early Jeep Motor, Fan, Starter, Transmission gears, etc. Been sitting in dry conditions for 30+ years. No idea what kind of shape it is in except it turns over so pistons are not frozen.”

Seller indicates the engine’s condition is good and that it is a 1945.

http://sanantonio.craigslist.org/pts/5673611500.html

UPDATE: **SOLD** Was $800.

“from Hobart welder, oil pressure 45lbs, all 4 cyl compression 125 psi, rebuilt carb, new water pump, serial # above water pump, NO emails or texts, ”

UPDATE: **SOLD**

Bruce spotted this rare Kermath engine for sale.

This vintage inboard is a 4cyl 61hp Kermath Sea-Jeep High Speed. A marine conversion of the military Willys Jeep MB 134ci L-head engine. From what I can tell, it appears to be all original and very minimally used.

Continue reading →

UPDATE: **SOLD** Was $350.

“95+% complete F-head early 50’s engine with attached T96 transmission with overdrive.
As is. Can send more pictures and answer questions if interested.
Will not sell any parts individually.’

UPDATE: **SOLD** Was $150.

Looks like this might have had a trencher on the back.

“Willys Jeep F134 engine, transmission, transfer case and Power take off, with PTO driveshaft. Condition unknown. Was stored in a barn and was told ran when pulled from a rusted jeep years ago. Engine is now stuck. I also have some Willys wagon and truck parts. Call or text the number in the reply box. Thanks.”

UPDATE: **SOLD** Was $500.

“2.3 Ford pinto engine & willys adaptor kit”