T90A D18 $500 Excelsior, MN
Another might be worth a look, 4CYL input shaft.
Information from seller:
Removed from a 1946 CJ2A, Jeep shifted well when removed, stored indoors for the last 20 years. May also fit some Scouts, do your research
T90A D18 $500 Excelsior, MN
Another might be worth a look, 4CYL input shaft.
Information from seller:
Removed from a 1946 CJ2A, Jeep shifted well when removed, stored indoors for the last 20 years. May also fit some Scouts, do your research
1959 Willys T-90 and D18 $800 Johnstown, CO
Might be a good pick up for someone.
Information from seller:
This is a good T-90 transmission and T-18 transfer case. Included is a Dualmatic overdrive gear. The entire unit is in very good condition. It could use new gaskets. The Dualmatic overdrive is a Warn knockoff. Included is a aftermarket shifter with back-up switch for back-up lights. Calls are best- nine seven 0- 2 one five- 9 four six nine. Will not respond to is it available. If it’s listed it is available. I do not answer messages every 5 min. Call me – thanks Michael
1949 Willys Jeepster Parts and More Welland, ON
There are a bunch of Jeepster and Willys Parts on a few listings, so if you need something maybe reach out and see what’s up.
1949 Willys Jeepster Rear Axle CA$200 Welland, ON
Posted as a Dana 23 out of a Jeepster, 4.88’s (39/8) which typically match up to the 226 it looks to have had in it so might be some R/P parts here, used gear sets can be tricky to set up, but axles look to be there, some backplates. Most used axles I have picked up are in this price range or slightly lower so its not priced way out there either.
Information from seller:
Axle came out of a 1949 Willys Jeepster, both sides spin freely. Dana 23 I believe. 39/8 tag reads. Have not taken cover off. Pick Up ONLY
https://www.facebook.com/share/1FqG5NssML/
Willys 1949 Jeepster Original Radio CA$1,700 / USD$1200
Information from seller:
When I bought my Jeepster this came with it, I did not install, did test it and light came on and all dials work. 6v, Guy said it was rebuilt. Comes with the Jeepster correct dash cover. Thats all I can tell you. Pick up In Canada 40 mins from Niagara Falls NY boarder/ Fort Erie boarder. Will ship with exact purchase price and Ins. for customs. $1200.00 US or $1700.00 CAD
https://www.facebook.com/share/14Hibop1RTx/
Jeep/Willys T-90 Transmission Case Housing CA$1
Information from seller:
Willys/Jeep T-90 transmission case, no chip/cracks, all screw hole threads intact. Take your pick. These have the screw holes for the oil slinger. All so have internal used parts. US funds paypal AS IS I can ship might be a little heavy on shipping cost.
https://www.facebook.com/share/1EUjuBgNYN/
Willys wagon rear license plate assembly CA$80
Information from seller:
Willys wagon rear license plate assembly, basical all there needs attention. $80.00 plus shipping from Welland Ont. I added LED light on inside to my bracket, works better then original 1156. Also included is plexy glass for lens cover, to be modified.
https://www.facebook.com/share/1Ankh1UaLF/
Probably will do some more from Canada lots of neat stuff posted.
Need some help identifying this one, so please comment if you know what vehicle(s) this might fit…
Caught sight of this auction for a “Transmission” (but also includes a Transfer Case), as I’m looking for a spare Dana 18:
Location: Reedsburg, WI 53959
This is a good example of a possible gem available at auction — the current bid is only $1, and it’s listed as “pickup only” – so if you’re in the area (perhaps Madison is the closest city?) and this is something you might need, I expect you may be able to pick this up quite inexpensively (would probably cost more in gas than the winning bid).
See the end of this post for some hints and tips about bidding on these types of auctions.
Doug shared this combo.
https://www.facebook.com/marketplace/item/425061533395825
“Unknown miles was operating but bearings are loose. Selling as core.”
Bill’s selling this hard-to-find transmission PTO box. Thanks to Andy for sharing it.
https://www.facebook.com/marketplace/item/1037905381185513
“Go-for-Digger Trenchers were built on Willys and Kaiser-era Jeep CJ5’s duallys from the early 1960’s to the early 1970’s. There has to be a few more of these left out there, maybe one in need of parts…
Power transmission box PTO for a Go-for-Digger trencher with a build date around 1969/1970. As you see it. Spins freely. It’s one of 3 parts that I have left from a resto-modded CJ-5 that I built.
Another part is a correct front bumper with the solid steel bar reinforcement and blade lifting chain. Pics show bumper still attached.
The third part is the full-length set of 3/8” (I think) steel outer frame reinforcements that came on the GFD Trencher (and maybe the backhoe). Better pics soon, but if you know these things, you know what I mean. They are on the floor in last pic.
Pick up in Lancaster, PA.”
At least one combo includes a WARN OD.
https://www.facebook.com/marketplace/item/341621008451582
“Selling 3 engines, 4 gearboxes and 4 differentials for Jeep 1960 or older. Prices vary.”
This setup looks interesting.
https://www.facebook.com/marketplace/item/1318781805420844
“T96-1A 3 Speed With Overdrive Transmission R10B-1E Jeep Willys transmission with a spicer 4-9-67???”
This is a good price. Seller also has other parts for sale, including a Warn overdrive.
https://sfbay.craigslist.org/eby/pts/7531587974.html
“This set up came from behind a small block Ford 302 289 in a Jeep CJ-5
good 3 speed trans with full syncro first to replace your weaker T-90 in your flat fender CJ-2a 3a 3b MB GPW. 10 spline clutch and pressure plate included (no bell housing)
The trans has an adapter to mate Dana/ Spicer model 18 t-case and comes with a broken case with good gears (incomplete)
I have other parts too for good prices, drive shafts, 5 bolt early ford bellhousing, good complete dana 18, dana 20 pto texas pattern, warn overdrive (OD pricey) Ramsey winch. Muncie and borg warner T-10 if you have cash don’t be afraid to ask.”
This may be a good price.
https://spokane.craigslist.org/pts/d/cocolalla-jeep-speed-and-case/7494634784.html
“Jeep T-98 4 speed transmission
Spicer 18 transfer case
Warn overdrive
Was installed in an early CJ 5
Looks good on the inside.
All gears look good and no rust.”