emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
Scott needs to sell his Truck.
“1948 Willys pickup. 327 V-8, 4-barrel, power steering, Warn Overdrive, new 35-inch Mickey Thompson tires. Recently professionally rewired, gauges restored in CA. Good daily runner and for road trips, I drove it to Chicago and back in June. I am the third owner.”
http://siouxfalls.craigslist.org/cto/2527360814.html
UPDATE: This sold today! Was listed at $1750.
(07/22/2011) Moze has a project he’d hoped to complete for sale. There is no motor/tranny at the moment. A job relocation is forcing the sale.
“The tailgate had the wood on it when I bought it. I since flipped it so the metal showed. It needs some repairs obviously (some cracked glass, exterior door handles don’t work, etc.) but nothing too serious. I’d like to see it go to a good home. Practically New: Tires, Dual Glass Pack Mufflers”
This needs some work, but it takes a good picture.
“1948 WILLYS PICKUP WITH GOOD NEBRASKA TITLE $1800.00
(4) FOUR WHEEL DRIVE, 12 VOLT ELECTRIAL SYSTEM
1959 SMALL BLOCK CHEVY MOTOR, WITH ELECTRIC IGNITION
RUNS VERY GOOD BUT NEEDS MASTER CYLINDERS
BODY HAS SOME RUST,VERY GOOD GLASS, REAR FENDERS NEED WORK.
THIS IS A PROJECT CAR NOT A DRIVER. SEEN BY APPOINTMENT ONLY!
(402) 658-4126 8AM/8PM”
http://omaha.craigslist.org/cto/2524343496.html
UPDATE: **SOLD** Was $1500.
I don’t believe this runs.
“Here is a 47 jeep 2 wheel drive truck i’m listing for a friend,rust free and very nice body,small V-6 was put in it and last owner gave up on it”
UPDATE:**SOLD** Was $3500
“Hurricane six cyclinder engine with low mileage (43,500). Always starts at any temperature and runs well. Comes with snow plow. Has spent the last 35 years taking care of 100 yard long driveway and a once-a-year five mile drive to town to get annual service. New muffler. New battery. Recent tune-up. Four wheel drive works well.”
Here’s a cool truck listed over at jeeptruck.com. The price is a bit up there though.
“1955 Willys truck and trailer. Beautiful piece of collection. Original, was used as firetruck in a small village in Quebec, Canada. Trailer comes with hoses and water pump (500 gallon/minute). It has skis for winter. One of a kind. It works still very well. Asking $35,000 I have pictures for it”
http://www.jeeptruck.com/sale/ad513/ad513.html
UPDATE: **SOLD** Was $5400.
This looks good. The rear of the bed has been sloped upwards in an unusual way.
“1961 Willys Pickup. Hurricane 6 cylinder. Looks and runs great. 6 foot plow available for additional cost, plowed last winter. Too many new parts to list”l
UPDATE: Still Available
(02/11/2011) Lots of details provided.
“For sale is a newly constructed rat rod willys truck. It has a total of 250 miles on it since completion. All parts were purchased new, the ones that weren’t were completely rebuilt. There is a total of $18,200.00 in parts alone in this car! It is a bargain at the asking price. The truck is as follows. Cab was sectioned 10″ down middle, channeled 10″ over frame, and 2″ taken of the bottom all the way around to remove external rocker panel. Floor structure is 1.5″&3/4″ box tube sheeted in 12ga. Gm column, full gauges, tach, shift light, cheetah scs shifter, bucket seats with seatbelts. It is wired front to back with a new harness. All lights and signals work perfectly. Truck has clean mi title, and is licensed in mi.
Frame- 2×3” boxed tube with full x bracing, mustang II front suspension, (“all new, hub to hub”) rack
and pinion steering, ladder bars on carrera coilovers in rear. 9″ ford with 4:11.1 gear. Wheel bolt patern is chevy 5 on 4 3/4″. Four wheel disk brakes with willwood dual master cyl, front and rear bias adj willwood pedals. Front tires 7.50×15 MT ET Drags. Rear tires 14x31x15 firestones. Front wheels are American racing ansens, and rears are centerline convo et’s.
Engine- Professionaly built 1965 small journal 327 chevy. .030 over, balanced, blueprinted, forged crank, forged 6″ howards rods, forged Keith black pistons, high pressure oil pump. Edelbrock aluminum rpm heads, roller rockers, and crane girdles. Camshaft is a custom ground Howards solid lifter flat tappet. Intake manifold is a wieand high ram with 2 600 cfm afb’s and edelbrock air cleaners. Full Mallory ign. 15/8 headers. 2 spd powerglide with brake, 4200 rpm convertor. For more info call mugsy at (nine o six)three seven o-otwo93 before 5pm est.
This car is a blast to drive! It rides great, handles well. All it needs is a new owner. Will consider trades for machine tools. Ie: lathes, verticle and horizontal mills, metal shears, pan and box brakes, shop equipment, trailers, gooseneck or bumper pull in the 14-18k gvwr range. Flatbeds, tiltdecks, or dump. Also, bobcats, dozers, backhoes, loaders, or tractors as long as they’re of a minimum value of 12k. If more pictures are needed, drop me an email address, and I will send some to you.”
http://up.craigslist.org/cto/2447161581.html
UPDATE: **SOLD** Was $7500.
Lots of work has been put into this ride.
“ratrod pick up truck one of a kind,305 motor t 400 tranny 10 bolt rear end 4: chop top 9: channel dual exhaust up sweep pipes new tires”
This is a project with a variety of upgrades at jeeptruck.com
“1949/51 Willys Project For Sale. I am getting too old, and a promotion at work is eating all of my time. So, sadly, my old Willys has to go. I have put a lot of myself into this project, but the years drag on and I am not sufficiently close to completing the job to keep at it. The reason I call her a 49/51 is that the title says it’s a ’49, but the VIN would indicate that it’s a ’51. Dave Reed I welcome all inquiries. email: home_stead@msn.com
1949/51 Willys Pickup Project Truck
New custom chassis
New Custom stainless steel suspension
Dana 61 rear w/ Powerlok diff
Dana 44 front rear
NIB Air Ride Suspension system
New Rancho RS9000 adjustable shocks
Cadillac 500 CID engine rebuilt w/ valves, cam, connecting rods, pistons, etc
New flywheel & clutch
New Richmond Gear 6-speed trans
Rebuilt NP205 transfer case
Headers
Cab rebuilt w/ firewall setback for engine
New pickup bed
Widened rear fenders
New Be-Cool radiator w/ dual electric fans
New A/C system from Vintage Air
New alternator
New gear reduction starter
New brake master cylinder
4-wheel disk brakes, rear w/ parking brake
New clutch master and slave cylinders
New bucket seats and center console
Most original parts cleaned and stored
Extra hood, grill assembly, and doors.
Cab holding fixture
Parts manual
Service manual
More”
http://www.jeeptruck.com/sale/ad501/ad501.html
“
