To Top

1943 Photo of Jeeps in Tunisia on eBay

• CATEGORIES: Features, Old Images This site contains affiliate links for which I may be compensated.

This photo shows soldiers ducking from snipers.

View all the information on ebay

“1943 Press Photo Soldiers and jeeps, Bizerte, Tunisia. This is an original press photo. World War II – Africa. As these years rolled into Bizerte in their jeeps to capture the city, snipers opened fire and the Yanks took over behind the jeeps and a handy well. Official Signal Corps Radiophoto. Photo measures 8.5 x 6.25 inches. Photo is dated 5-12-1943.”

1943-05-12-jeeps-tunisia-1

1943-05-12-jeeps-tunisia-2

[fb_button]
 
To Top

1949 Jeepster Scottsdale, AZ $10,500

• CATEGORIES: Jeepster • TAGS: , This site contains affiliate links for which I may be compensated.

Looks like a nice Jeepster.

https://losangeles.craigslist.org/lgb/cto/d/cave-creek-1949-willys-jeepster/7005052203.html

1949-jeepster-scottsdale-ca1 1949-jeepster-scottsdale-ca2 1949-jeepster-scottsdale-ca3 1949-jeepster-scottsdale-ca4

“2WD Very rare. They only made these Jeepsters from 1948 to 1950. This Jeepster has the very rare optinal 6cyl and 1949 was the first year you could get it. 3 speed with push button overdrive. Has the rare optional radio, turn siginals, and mirrored spot light. This is a very solid Arizona Jeepster and has had only one paint job done back in the 1970’s. The paint still looks good for it’s old age. Has always been taken care of and always garaged. This Jeepster has been in the same family since the early 50’s. Overall in good shape for it’s old age and very solid. The Jeepster runs and drives. Needs new soft top put on and I have the new top. Clean title in hand.”

[fb_button]
 
To Top

1953 CJ-3B Spokane Valley, WA $13,000

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

Lot of mods.

https://spokane.craigslist.org/cto/d/spokane-1953-cj3b-jeep/7005113798.html

1953-cj3b-spokanevalley-wa1 1953-cj3b-spokanevalley-wa2 1953-cj3b-spokanevalley-wa3 1953-cj3b-spokanevalley-wa4

“Don’t want to sell but family has outgrown. Jeep sitting on 4” shackles and axles under springs with a 44 rear end with fresh bearings, seals, and axles. 30 front out of a newer Jeep and 36” steel belted bad boy swampers with lots of tread top and sides.

Continue reading

[fb_button]
 
To Top

1950 CJ-3A Hemet, CA **SOLD**

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** $1800.

(10/26/2019) This project has been built with a 2WD axle up front.

“1950 Willys CJ-3A, rolling chassis only. Post office jeep front axle, body is straight, have windshield frame and old glass, this is a project jeep for sure, floors need some work but body is in good shape. Comes with tow bar and working tail/ brake lights, I have some SBC engine parts but nothing complete.”

1950-cj3a-hemet-ca0 1950-cj3a-hemet-ca1 1950-cj3a-hemet-ca2

[fb_button]
 
To Top

Year? CJ-2A Santa Maria, CA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $750.

Seller is ready to part with this project. This will take an in-person visit to evaluate the value.

“I have to many project so I am selling one. This a CJ2A project. Completely disassembled. Lots of used parts and new parts. More than you need. I spent a lot of money over about 20 years. I was going to use the engine and running gear from a 70 CJ-5 with the V6. Email for what pictures I could get in the shed and a list of stuff you are getting. This is located in Orcutt. Bring lots of cash and lots of help.”

cj2a-santamaria-ca

[fb_button]
 
To Top

A Few CJ-2A Parts Miramar Beach, FL

• CATEGORIES: Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD**

Perhaps they are more common than I realized, but I rarely see hitches for sale.

“These are off of a 1949 Willys Jeep cj2 ( I think) Bumper, 2 trailer hitch and under motor skid plate”

hitches-fl

[fb_button]
 
To Top

1942 GPW Pagosa Springs, CO **SOLD**

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** $5000. Now here.

Looks like a solid GPW with one major modification: the steering box. Though the steering looks unusual, on the plus side it’s got a thick (half-inch??) support plate coming off the frame; also, it seems to have held up well (given, I imagine, this was an older mod). An additional plus is that the builder didn’t cut the front cross member when updating the steering (or so it appears), so I imagine someone could restore the original steering if they wished relatively easily. I think it would make a good entry level GPW for the right person.

1942-gpw-ps-co0 1942-gpw-ps-co1 1942-gpw-ps-co2 1942-gpw-ps-co3 1942-gpw-ps-co4

“1942 Ford WW2 GPW. New cooling system, ignition system, fuel system, electrical wiring front to back, seats, rear brakes, etc. Has an engine from a cj2a. The engine overheated at some point and cracked. Will need a new block. I’m reluctantly selling it. I’ve spent alot of money and time on this Jeep. It is the perfect restoration project for someone who wants to disassemble it and restore it from frame up. Most of the parts are already there. It needs a proper restoration. I’m asking $6000 and it has a clear title. The price is in consideration of the engine work needed.”

[fb_button]
 
To Top

1942 GPW/CJ-3A Electric Auburn, CA $8500

• CATEGORIES: CJ-3A, GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(10/17/2019) This is an electric powered jeep that’s listed as a 1942 GPW. It’s actually on a 3A chassis. The tub has MB tool lids, but it has the other hallmarks of a GPW body (square indentation for the tool box lock button and the GPW rear seat setup).

https://sacramento.craigslist.org/rvs/d/auburn-1942-ford-gpw-electric-jeep/6997663746.html

1942-mb-electric-sac-ca0

1942-mb-electric-sac-ca1

1942-mb-electric-sac-ca2

1942-mb-electric-sac-ca3

1942-mb-electric-sac-ca4

“This jeep is a real original 1942 gpw ford military tub hood and fenders On real original civilian cj3a frame and running gear.

I just regd it. It is fully street legal but just like the original its not a freeway veh.

It has a brand new ELECTRIC Motor.
And brand new duracel batterys.

The motor puts out 77hs power.
The Orig motor only had 60hs power.

It Runs great. It’ll do about 35 And it doesnt like hills but It can be tweaked to do higher rpms or have higher torque. I just started messing with that but im slow at it because of a condition with my hands. I will change this paragraph when i have it dialed in right.

It Wheels good and does great on flat ground. I have a wheelin test hill here i can show u on. extreme hills use lower gears and it does good . It’ll do it but u have to Know your gears to get the most out of it. It takes a little getting used to.

Continue reading

[fb_button]
 
To Top

1946 CJ-2A Steamboat Springs, CO $2500

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

I’ve never seen a PTO bar bent/positioned like that. The trailer is pretty odd too, as it has an ‘exhaust'(?) on it.

https://www.facebook.com/marketplace/item/443293836294553/

“Price negotiable…not running…needs work…starter needs work or needs replaced and needs new tires…trailer not included but negotiable or could sell separately…located 10 minutes from town you haul”
1946-cj2a-steamboatsprings-co1 1946-cj2a-steamboatsprings-co2 1946-cj2a-steamboatsprings-co3 1946-cj2a-steamboatsprings-co4

Unusal trailer:
1946-cj2a-steamboatsprings-co0

[fb_button]
 
To Top

1948 CJ-2A Crawler Montrose, CO $4000

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

It’s a big project.

https://westslope.craigslist.org/pts/d/montrose-48-willys-flatty-project/7006209870.html

1948-cj2a-crawler-montrose-co

“48 Willys Project
-Ford 5.0 engine, AODE transmission, NP205 transfer case
-Dana 60 front axle, 14 bolt rear axle
-Chevy Astro steering gear tapped for hydro assist, PSC hydro assist ram, RuffStuff 7/8″ heim kit with 3/4″ grade 8 bolts
-Fully boxed frame with engine crossmember mount
-Front and Rear Triangulated Radius Arm Suspension
-Aluminum Fuel Cell
-112inch wheelbase
-Removable BellySkid to drop transmission, BoatSide Sliders”

 

[fb_button]