Maybe this bit of nostalgia will appeal to someone?
View all the information on eBay
“PENNSYLVANIA 1980 JOHNSTOWN ALLEGHENY HIGHLANDERS FOUR WHEEL DRIVE CLUB BOOSTER LICENSE PLATE. AS SHOWN.”
Maybe this bit of nostalgia will appeal to someone?
View all the information on eBay
“PENNSYLVANIA 1980 JOHNSTOWN ALLEGHENY HIGHLANDERS FOUR WHEEL DRIVE CLUB BOOSTER LICENSE PLATE. AS SHOWN.”
UPDATE: Here’s a Thor PTO winch for sale. See the brochure for it at the bottom of the post. (Thor also made hubs).
https://bakersfield.craigslist.org/pts/d/bakersfield-1960s-thor-pto-lb-winch/6912177380.html
“A late 1960’s Thor T-100 Pto 8000lb winch. Popular on old Willys and jeeps,
Very hard to find, in Excellent condition as far as running properly.
Hasn’t been used since the late 70’s always been stored in a dry place no rust, has some paint missing from being moved around over the years.
Asking 650$ Obo
I have no use for this but I’m sure someone restoring a project Jeep or Bronco would love to have an original winch from the era.’
==========================
Original Post from December 2016:
The Thor line of winches. Thor also had a line of hubs.
UPDATE: Price dropped to $5000
(02/16/2019) Has updates.
https://losangeles.craigslist.org/lac/for/d/san-gabriel-1953-willys-jeep/6913290435.html
“I’m selling my1953 willys jeep with good condition. It’s drivable and v8 small block engine.
Two gas tanks
brand new seats
New suspension
New cooling
New oil and filter
Full rolling bar
Storage boxes.
It’s clean title.”
Includes a DVD of this jeep going over the Rubicon. Needs master cylinder fixed.
https://spokane.craigslist.org/cto/d/spirit-lake-1947-willys-overland-cj-2a/6914406334.html
“1947 Willy’s Overland CJ-2a Jeep
Veteran of 5 trips over the Rubicon Trail, ‘the Hard Way’!
• 225 V-8 ‘Odd-Fire’ GM Engine, Rebuild has less than 2,000 miles on it!
• Engine had Complete Rebuild – Bore = 10% over – Tight!
• Weber Carburetor – Baffled for running on “extreme-tilt” terrain!
• Dana-40 Heavy-Duty Rear End!
• Posi-traction in Rear End = 110# torque to break loose = “Tight”
• 11” Brakes installed from ½ Ton! (9” is standard on the Willy’s)
• Warn Hubs on Front Wheels.
• Electronic Ignition installed = ‘no points to mess with’!
• Original 3 speed floor-shift with 1st being a ‘granny-gear’ for ‘walking’.
• And….has a Back Seat!
* Full Roll Bar with added Seat-Belts
• All ‘Steel’ original body!
• Have extra parts, i.e. Original ‘stick’ hubs, soft-top frame + doors, 15” wheels, extra drive-line shaft, extra rear-end pinion, etc.
• Comes with a “Clean” Title!
Continue reading
UPDATE: **SOLD** Was $3850.
Though it has the driver side spare tire mount, I do not believe this was a lefty. It appears the original holes for the front bow holder are still there.
“1948 Willys CJ2A for sale. L-head motor. All brake lines and wheel cylinders have been redone. New brake master cylinder, converted to 12v. New gas tank. Reupholstered seats. Tub is in pretty good condition. Runs well. Call for more info or if you would like to come take a look”
Will need some work.
https://spokane.craigslist.org/cto/d/hayden-1950-willys-jeep/6913596603.html
“Help me reclaim my garage. Running 1950 willys flat fender jeep project. Orginal flat 4 drive train, new radiator, new tires , new springs, clean title. Body is rough, rust is present, but not too bad for its age. No time to work on it and I need the space back. Bring a trailer. 1,800 obo”
UPDATE: **SOLD** Was $700.
(07/25/2018) Not sure how much value is here.
“Decent body, chassis, roll cage. Tub has had the floor repaired, new fuel tank and has lifted suspension under it. Had a chevy 6 cylinder in it last. Last owner cut the hood for stacks, but will be easy to repair. All body edges are good, has a few rust spots that will be easy to fix. Steering column is there. Have a bench seat that fits well. Was going to build, but might clearing out projects.”
UPDATE: Status Unknown. Was $300.
“This is from an early CJ 2a or cj3 Jeep from 1946 to 1955 era. Sitting for long, will need to be rebuilt most probably. AS IS
MUST PICK UP AND BE ABLE TO LIAD ON A PICKUP.’
Don’s got this rolling GPW chassis for sale.
https://charlotte.craigslist.org/pts/d/shelby-1942-early-willys-frame/6913313592.html
“1942 Early Willys rolling frame with three digit GPW serial number. Very nice early style Willys frame with Ford axles, steering box, and rear springs. Front springs appear to be the Willys style. Could be used as a Ford GPW or Willys Slatgrill rebuild. Pick up in western NC. $1000”
UPDATE: **SOLD** Was $4499.
The front frame rails have been patched. It has an f-head and the dash comes with directions, lol.
“Starts, runs, drives. Transmission and brake lines redone. Winch. Late model motor. Clear title.”