This photo and caption appears in the June 02, 1944, issue of the Saturday Evening Post.
1952 M-38 Orting, WA $7500
UPDATE: Still Available.
(10/20/2018) It’s a nice looking build, but there’s still some work left on it.
https://seattle.craigslist.org/tac/cto/d/orting-1952-m38-jeep/6875551077.html
“Love classic old Jeeps and would like a project? My husband was restoring this Jeep with a friend when he got ill. He has now died, and the Jeep is not finished. In fact, the engine is the only thing almost finished. The rest is still to be done. His intent was to put only the best in this Jeep that he was going to keep for himself.
New parts: 225 Buick Odd Fire V-6 (professionally rebuilt by Bud Williams), 0 miles, 4 barrel carburetor and high rise; HEI distributor; Headers, 2 1/2 inch dual exhaust with Flomasters; Starter; One-wire alternator; Spark plugs and wires; Painless wire kit; Clutch disc, pressure plate, and throw out bearing; Beard front seats; Tail lights; Offenhauser valve covers; Remote oil filter kit; 5 quarts break-in oil; 5 quarts running oil; 2 filters for kit.
Already had – not new: Bestop top; Bikini top; Top loader Ford 4 speed; Warn overdrive; Scatter shield; Rebuilt crossflow radiator; Flanged axle spicer 44 rear with Detroit Locker No Spin; Open knuckle disc brake 44 front with spicer lower lock (both have gear ratio of 5.38); Stainless steel windshield, hood, and grill; Warn 8000 lb winch; 5 15″ mags, spare with no tire – super swampers 33x12x15 Wrangler; Tilt steering wheel; Power steering; Full cage roll bar; Hydraulic clutch; Electric fan; Tow bar.”
1958 CJ-5 Canterbury, NH $4500
Travis shared this CJ-5.
https://nh.craigslist.org/cto/d/canterbury-1958-willys/6873505478.html
“Running 1958 Willys Jeep. Complete front /rear brake replacement. carburetor rebuilt.”
1948 CJ-2A Marysville, WA $14,500
UPDATE: Still Available.
(04/07/2019) Looks in good shape.
https://seattle.craigslist.org/sno/cto/d/marysville-1948-willys-jeep-cj2a/6873758572.html
“Restored ’48 CJ2A Willys Jeep original drive train with Warn Overdrive and front lockout hubs 12 volt electrical with turn signals solid rust free body everything works needs nothing.”
1946 CJ-2A Chelan, WA **SOLD**
UPDATE: **SOLD** Was $12,950.
Has some minor updates.
“I purchased this vehicle from an older gentleman who had owned it for 44 years. He used it in his orchard for several years and then had it in storage for over 30 year. He had done a ton of work on it. The vehicle has rusty floor pans which were replaced properly. He had the body off the frame and had the body work done and painted. About 300 miles ago he had the entire drive line gone through, engine, transmission and transfer case. He had the tranny rebuilt since it had lots of wear.
The leaf springs are all new.
The brakes have all been worked on. The rear drums were able to be turned and were then put on the front with new break pads. The rear drums could not be turned so new ones were purchased but need to be installed along with the brake pads. You can see the hubs and brakes in the picture.
1948? CJ-3A Project Provo, UT Make offer
There’s value here. Listed as a 1948, but looks to be a 3A to me.
https://www.facebook.com/marketplace/item/1284334265052435/
“1948 Willys CJ3A project. Many new parts, body, suspension, harness, etc. Sold as a package. Body and fenders rhino lined underneath and inside. Good tires, no motor or tranny. Make offer. Need it gone.”
1977 M-151A2 Spencer, WV **Status Unknown**
UPDATE: Status Unknown. Was $11,500.
Looks solid.
“Original uncut solid. Rop. 24 volt. Mostly rust free. Runs great. WV titled.”
1968 M-151A1 Spencer, WV **SOLD**
UPDATE: **SOLD** Was $13,500.
Includes some radio equipment.
“Excellent original condition. Not cut. Original 24 volt. No rust. Runs great. Radios RT-505/PRC25. WV titled. Collector quality.”
1949 Jeepster Daytona, FL $5900
Runs, but needs some work.
https://daytona.craigslist.org/cto/d/pierson-1949-jeepster-overland/6867743566.html
“This is a 1949 jeepster overland convertible that runs excellent but is a project car. Has: 3 speed on the column, 50lbs oil press, rebuilt carb(could use an adjustment possibly but no big deal), 4 cylinder engine, spare tire, has all the hardware for top but needs a new top, extra chrome, window frames for doors, MILEAGE UNKNOWN. Wipers, heater and top are the only items that need to be completed on vehicle! These cars are pretty rare but seem to be catching the eyes of more and more people because of their uniqueness! Don’t miss out!”
Be Your Own Inspector M-38/M-38A1 Booklet
UPDATE: You can now download a high resolution PDF here (25mb):
http://www.deilers.com/be-your-own-inspector-m38-m38a1-booklet.pdf
One reader asked about a donation in exchange for the PDF. You are welcome to download it for free, but If you want, you can donate a few bucks via PayPal: payment@ewillys.com. The money goes toward the purchase of more brochures (and the documentation/sharing of them).
==========================
Original Post April 26, 2019: Here’s the booklet I won off of eBay.



























