To Top

1943 Flattie Brighton, CO $7500

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

Not sure if there is any MB left on this Flattie other than maybe the GPW frame.

https://denver.craigslist.org/cto/d/1943-willys-jeep/6571562137.html

1943-mb-brighton-colo1 1943-mb-brighton-colo2 1943-mb-brighton-colo3 1943-mb-brighton-colo4

“1943 Willys jeep
This classic jeep was gone through and upgraded in 1998 with a cj2a body and a cj3a windshield on an original ford gpw chassis, rebuilt/upgraded drive train, built to be a reliable and capable off roader. Titled and registered in Colorado.
231 even fire Buick v6 bored .30 over, edelbrock performer manifold with a holly 390cfm 4barrel and a 4 core radiator with manual and electric fans.
Borg-Warner T-86AA synchronized 3spd, Dana 20 t-case, front Dana 30 and the rear is a Dana 44 with a Detroit locker. Axles are stock width with 5.38:1 gear ratio
Mild lift with new springs, all new brake system with 11” drums brakes at all four corners, nice 31-10.50×15 mudders on it now, used to be 32-11.50×15 but they limited the steering radius and did not work well with the Colorado trails.
Saginaw steering box upgrade. Continue reading

[fb_button]
 
To Top

1948 CJ-2A Birkenfield, OR **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3850.

Runs and drives.

“Very clean CJ2A, runs good, big brake kit, 12 volt, new gas tank, best top with doors, tow bar, turn signals”

1948-cj2a-birkfield-or1 1948-cj2a-birkfield-or3 1948-cj2a-birkfield-or2 1948-cj2a-birkfield-or4

[fb_button]
 
To Top

1951 CJ-3A Western Colorado **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1850.

Runs.

“1951 Jeep Willys
Project Time! Yep, rusty. She is a 1951 Jeep Willys with a good running motor. I do not have the time or the money to do it right, so I want to send it off to a new home where she will get the love she needs.”

1951-cj3a-westslope-co1 1951-cj3a-westslope-co2 1951-cj3a-westslope-co3 1951-cj3a-westslope-co4

 

[fb_button]
 
To Top

1946 CJ-2A Bend, OR **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5500.

It’s missing the floor starter. Includes 2nd engine.

“1946 Willys Jeep CJ2A in fair condition; all original, ready to be restored; a second motor comes with it in very good shape.”

1946-cj2a-bend-or2

1946-cj2a-bend-or4 1946-cj2a-bend-or3

[fb_button]
 
To Top

1946 VEC CJ-2A Pioneer, CA *SOLD*

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4000.

Has the early windshield.

“Non running 1946 Willy’s Jeep, needs to be trailered but motor will turn over. Lots of original parts, 3 speed manual trans, decent condition overall. Call for more details”

1946-cj2a-pioner-ca

[fb_button]
 
To Top

1951 CJ-3A Brush Prairie, WA **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2000.

I’m wondering if this was a DJ-3A body. The “side stripes” are right at the location where the large opening bodies had their slant. Factory T-86? Lacks an engine.

“Solid rust free body and frame. No engine, but it does have the original factory T-86 3-speed transmission and transfer case. This was running a small block Chevy until it was removed earlier this year for another project. Included with the sale is a set of sbc headers and the motor mount plate so that a sbc could be dropped in and bolted right up. This Jeep was a runner up until this year, so it won’t take much other than a motor to have this up and driving. I have the title in hand and it’s clean, clear and in my name.”

1951-cj3a-port-or1 1951-cj3a-port-or2 1951-cj3a-port-or3 1951-cj3a-port-or4

[fb_button]
 
To Top

1946 VEC CJ-2A Chattaroy, WA $1750

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

Runs.

https://spokane.craigslist.org/cto/d/1946-willys-cj2a/6572301330.html

“This is a stock CJ, 4 cyl flathead, 3 speed transmission, 4×4, It starts, runs and drives and stops it has the factory manual hubs, the four wheel drive works as it should. I have only used it on my property and do not drive it on the street. it is not licensed or titled.
I’m asking $1750 and will consider offers.
Please call only between 8am & 7pm
I do Not text so phone calls only.”

1946-vec-cj2a-chattaroy-wa1 1946-vec-cj2a-chattaroy-wa2 1946-vec-cj2a-chattaroy-wa3 1946-vec-cj2a-chattaroy-wa4

 

[fb_button]
 
To Top

Patterson Working For His Keep … Mower Fixed

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

UPDATE: I finally got the Tractor flywheel to release. The key was sheered. Got a key, reassembled, and Mom is mowing the lawn!

IMG_5533

We made a quick run up to Seattle yesterday to fix my parents lawn mower and mow the lawn with our mower. To work on the mower, I needed to pull it out of the barn and get it to the garage. My options for moving the John Deere L110 were limited. After considering my options, I decided to enlist Patterson to pull the mower.

It turned out that the mower wasn’t easy to pull up hill, especially when my mother had her foot on the brake. I suggested she jump off the mower. Once she did that, it was much easier to pull, though without low range and only 2WD, it was still a bit of a challenge.  Still Patterson persevered. Eventually, we got it in the garage. … who said a DJ-3A isn’t a real jeep?!!??

The mower is proving to be a challenge. It looks like the key has sheered between the flywheel and the crankshaft, keeping the flywheel from releasing off the shaft . I have a good puller and it is still be stubborn.

Anyway, that kept me busy last night, so just a couple updates today.

[fb_button]
 
To Top

Identifying This Model of Ramsey Winch

• CATEGORIES: Features, wanted This site contains affiliate links for which I may be compensated.

A reader was wondering if anyone knew what model of Ramsey winch this was? Most of my books are back in Pasco and the internet wasn’t too helpful. Anyone know?

IMG_5538 IMG_5539

[fb_button]