To Top

1952 Truck JeepRod Ogden, UT **SOLD**

• CATEGORIES: Jeep Rods, Willys Trucks This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $12,500.

This could be fun on the salt flats.

“Custom build rat rod, 4″ chop and channeled. Fresh 283 sbc and 700r4 trans. Ford 9 inch. Custom Zd frame. Everything works. Runs. Ready to go.”

1952-truck-jeeprod-ogden-ut

[fb_button]
 
To Top

Year? CJ-3B Wedgefield, SC $2000

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

Appears to have a replacement body.

“Cj3b Body is in good condition and has a small rust spots on driver side of the body nothing major floor boards in good condition it’s been sitting up for about three years fuel system will need to be cleaned an needs some tires Jeep is complete an will run also has small warn winch on front I have clean title in hand $2000.00 or best offer I will not trade cash only I will not hold this for you so don’t ask .”

https://columbia.craigslist.org/cto/d/cj3b/6453196298.html

year-cj3b-wedgefield-sc1 year-cj3b-wedgefield-sc2 year-cj3b-wedgefield-sc3 year-cj3b-wedgefield-sc4

[fb_button]
 
To Top

1958? CJ-5 w/ Trencher Storrs, CT **SOLD**

• CATEGORIES: CJ5 • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2800.

(01/22/2018) Ted’s got this trencher for sale.

“For sale late sixties CJ5 Auburn Jeep A Trench 1968? Would make a great yard truck/ Plow Jeep,comes with dirt plow and snow plow. Starts, runs good and drives , clutch feels good , no brakes . Body’s kinda rough but frame looks pretty good . Havent had a chance to go over it well to check everything but seems to be pretty complete , missing one of the augers. PTO engages and shaft spins . Not very familiar with these units so will try my best to answer any questions. Looks complete enough to restore or get going and use as is, or would be a great parts donor for another Auburn Trencher unit. Front counter weight there ,as is the creeper gear , pto assembly, Fhead motor, overload springs ( Canfields or Koenigs ?) etc Too many Jeeps to work on this one needs a new home $2800 Feel free to call,text, or email for details , I will try my best to answer all questions. If I miss your call (very loud at work) I will return the call”

1968-cj5-trencher-storrs-ct2

1968-cj5-trencher-storrs-ct03

Continue reading

[fb_button]
 
To Top

1942 MB Vancouver, WA $2500

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

Project.

“1942 war 2 MB Willys (jeep) for Restoration or Parts. Partially disassembled. Witch means I have removed the mud and some rust.
Ford flat head, 3 speed trans
The tub has been sand blasted and I have new panels for the bad spots. To many projects and something has to”

https://portland.craigslist.org/clk/cto/d/1942-mb-willys-needs/6486031605.html

1942-mb-vancouver-wa98 1942-mb-vancouver-wa99

[fb_button]
 
To Top

1947 CJ-2A Tucson, AZ $3000

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

Needs work.

“Great project Jeep for someone. CLEAN TITLE Starts right up, runs and drives. Will need some work to be road worthy. Needs some wiring (chassis wiring) Needs brake work. (Master cylinder) One tire leaks down after a few days, will need new tube. Had some oil leaks that should be fixed before it is driven much. Currently has no seats but I’m working on getting some mounted. Motor is a Studebaker Flathead I6 170 from a early 50’s champion or similar The rest of the drivetrain is all original Willy’s. Chassis is rust free but the body has some rust. Will be a fun project for someone. Won’t take much to get it on the road.”

https://www.facebook.com/marketplace/item/822243497948409

1947-cj2a-tucson-arizo

[fb_button]
 
To Top

1947? Truck Daytona Beach, FL $12,500

• CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.

UPDATE: This has parts for a couple different trucks.

Might need some interior finishing.

“1947 Willys Jeep Pick-up Truck 250 ci. in. Chevy engine Complete rebuilt transmission – transfer case Warn brand over drive addition, Power Steering allnew brake parts also comes with pioneer rack with shovel and tire pump. This Jeep was taken fully apart and put back together all new parts. Will need interior (headliner, carpet) Drives,stops,shifts,is registered in my name with a clear Florida title and insured.”

https://orlando.craigslist.org/cto/d/1947-willys-jeep-pick-up-with/6482951860.html

1947-truck-orlando-fl1 1947-truck-orlando-fl2 1947-truck-orlando-fl4

[fb_button]
 
To Top

1946 VEC CJ-2A NJ **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3500.

It’s a column shift with indents (top indent at least) so likely a VEC CJ-2A. Body is rough, though has been patched in places. You don’t often see just one part time hub. I’d check to make sure the left front axle and/or front R&P doesn’t have some issue.

“I was told by the heirs that this was a 1948 Willys Jeep, I do not have a title, so I am unsure , there is a long number on the engine, that could lend a clue. This is a 3 speed standard trans, on the column, with two shift levers on the floor, it rolls easy, and the linkage is all free to the trans and transfer case. The odometer reads 38k miles, what you see is what I have, there are no extra parts, engine is complete, radiator and all parts in engine compartment intact.
Serious only, I’m sure the parts are hard to find for this vintage , possibly a 1947 Willys Jeep, Convertible,
the frame is good, rears are complete, and has locking hub on the front left wheel , under the paint is was a medium green when new.”

1948-cj2a-vec-nj86

1948-cj2a-vec-nj87

1948-cj2a-vec-nj88

1948-cj2a-vec-nj89

[fb_button]
 
To Top

1943? MB? Denton, NC **SOLD**

• CATEGORIES: CJ-2A, MB This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was No Price.

The body might be MB, given the gas tank. No full floaters in the back. Probably a mix of parts.

“Got it on trade don’t know much about it but it ain’t locked up willing to sell or trade for other vehicles it is a good project for someone who has the time trade for truck or just let me know what you got”

1943-mb-denton-nc1

1943-mb-denton-nc2

1943-mb-denton-nc3

1943-mb-denton-nc4

[fb_button]