emailNeed to contact me and don't have my email? Click on email button.
About eWillys
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
“Up for sale is my 1949 Willys pickup project. This is a mostly rust free project that has some blemishes. This truck is 57 years old and has some age.
TITLED!!!
The engine was freed up a year ago. I have replaced:
Water pump
Entire wire harness
Starter
Coil
Fuel pump
Headlights
Alternator
All motor gaskets including head gasket
Head studs Continue reading →
“I have decided to sell my 1946 Willys Jeep CJ2A. It comes with lots of extra parts, just look at the last picture. The only rust is on the driver side floorboard, which is pictured as well. The tires are in decent condition and still have a lot tread. It currently has different rims on the front and rear, so it could use a new set of wheels. It does not have a title.
If you have any questions feel free to call, text, or email me. If I don’t answer, just leave a message and I’ll get back to you as soon as possible.”
(07/19/2015) Runs and drives, but needs brake work.
“1956 Jeep CJ6, all original except the paint job. 4cyl engine runs good, original seats in good condition. Tires are fair. Needs the included new master cyl installed to make the brakes work. 4wd works good. the front fenders are beat up. very little rust. perfect for restoration. Clean, clear title in hand.
Mike is to the left, I am behind the jeep, and Mark is to the right. We are looking over a jeep that they believe was one of MacArthur’s from the Philippines.
As I mentioned in an earlier post late Monday evening, Mike Ragsdale emailed me about a friend of his, Calvin Ishmael, who died this past June. Calvin had amassed an extensive collection of jeeps and parts. He’d been afflicted all his life with the dreaded Willys sickness, the poor guy. With his passing, his family was organizing and then selling what he’d been gathering for more that a half century (fifty-one years by Calvin’s own count). Mike thought that, since we were so close to Baton Rouge, we might want to come down and see Calvin’s place before it was sold.
Ann and her mother were excited for an adventure into Louisiana, so on Tuesday we left around noon and drove late into the evening. On Wednesday morning we met with Mike and feasted on a Cajun speciality, the Beignet, a sweet fried pastry tossed in powered sugar.
Somehow we didn’t get a photo of the beignets, so this one is from the internet.
Inside a café that had been around quite a few years, Mike explained that he’d been an avid reader of eWillys for sometime and had bought several jeeps off the site. At some point Mike needed some parts. Hearing that Calvin was a local with parts, Mike contacted him. One thing led to another and a close friendship blossomed. Mike explained that Calvin came from a large family, but no one else had the passion for jeeps that Calvin did, so with his death they were hoping to sell some of his jeeps and his extensive parts collection.
With our Beignets consumed, Mike explained that he’d lead the way to Calvin’s warehouse near Baton Rouge where we’d meet Calvin’s youngest brother Mark, the man who would lead our tour.
When we arrived, it wasn’t difficult to spot which warehouse was Calvins; rusty jeeps marked the spot.
UPDATE: It is 5:30am. Our plan to see the Bureau of Printin and Engraving later today has been tossed. Rosemary fell ill and is doing a little tossing of her own. We are now a mobile hospital. Never a dull moment!
It’s 2:30am Thursday morning as I write this and we are just about back to the Grapevine area of Texas. We had a great time on Wednesday and I will tell you all about it later today (I’m waiting for a little more bit of information before I can complete the post). Until then, here’s a sneak peak at one part of a passionate jeep lover’s collection: his “bone yards”. There are mostly M-38s and M-38A1s, but also some CJs and one part’s jeep CJ-V35U.
“1942,Willy’s jeep made by FORD, this jeep is in running condition, sounds like a sewing machine
Converted to 12 volt
All gears function as they should
Four wheel works
Fun to drive and boy what a eye catcher.
And a real conversation piece come take a look might trade for side by side and cashcash 8500.”
“I am 80 now and the wife says all the project have to go–. This is another project I just do not have time for.
Cab Forward Jeeps were produced from 1957 thru 1965 this one is a 1959 model, short wheel base (81″), the four cylinder motor is 134 cubic inches and rated at 75hp. The first thing I did with this vehicle was to disassemble it and take all sheet metal inside and out to the blaster once that was done red oxide primer was shot on all the bare metal. The cab was then placed back on the chassis. This is as far as I have got on this project. This vehicle when I purchased it did not have a bed, we drove it 8 miles from the purchase site to my place of business. All the gears and the 4wd worked as they should have. This is a roller”
“Just in time for Fall Hunting and Pumpkin Chunkin!
Thinning the collection of vehicles and the Willys is next to go.
She had frame off resto in 2006. this included…
Frame –
Stripped down to frame – welded all holes and cracks – Painted with OD Green Lacquer
Suspension reworked with lifted springs and a spring-over – Painted with OD Green Lacquer
Body –
Nice fiberglass tub painted with bed liner, now white plastic dip. Since its fiberglass there is no rust and since it weighs virtually 200 lbs, this thing hauls ass up until 35-40mph. Not geared for highway use. Continue reading →
“Rare Jeep FC-170, complete truck, but realize this is a project, I pulled it out of a field in Kansas this last April, where it sat for 22 years. I have a title but it is a Kansas title in the original owners name. The truck has some questionable body work(Bondo) but it is all there. IT DOES NOT RUN NOR DOES IT HAVE BRAKES. The original 6 cyl motor is free and with some gas and a battery it should start, as the carb has been rebuilt, has new wires and plugs, and fresh oil. I have the original Jeep Rims and other parts that will go with it. I lost interest in this and just would like to move it along, price is negotiable but don’t make any offers with out coming to look at it, Cash only!! ”