emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
Someone likes red.
“1947 Willy’s Jeep CJ2A Soft Top. Runs well, 6V electrical system, no rust, repaired floorboards, all gears work, four-wheel drive works, brakes and lights work. Garaged in Wakefield, NH. Asking $5500!”
http://nh.craigslist.org/cto/5791906068.html
Has an updated engine.
“48 willys
4spd
6cyl
4wd
manual trans”
http://sacramento.craigslist.org/cto/5792110427.html
UPDATE: **SOLD** Was $5000.
“1948 CJ 2A Willy’s Jeep
Runs but needs work
original willys engine
top made to fit not original”
UPDATE: Price bump to $7500.
(09/04/2016) Looks fun.
“All the wiring is done with airplane wiring labeled
Paddle tires and rims are included.
1. 1964 Oldsmobile rear end with Henry spool and axles.
2. 1975 jeep transfer case.
3. Super T-10 4 Speed Transmission with/elite 3rd and 4th gears.
4. McCloud slipper clutch & flywheel.
5. Scatter shield bell housing.
6. 373 C.I.D small block Chevy Yencer built.
A. 400 C.I.D. Block standard bore. Block casting #3951511
B. 350 C.I.D. Billet crankshaft with Hank crank bearings.
C. Both the rod and bearings are pinned.
D. The engines been balanced.
E. Flash grounded and shotpeaned Chevy pink rods.
F. Speed pro-pistons and tapered wrist pins.
G. 14 to 1 compression W/.010 deck Clarence.
H. Chevy cast/iron turbo angle plug heads/ported and flow tested by Yancer.
I. Stainless steel 194 valves and titanium retainers.
J. SIG Errsen roler valve lifters.
K. Competition camshaft #CS-322-C-R8
L. Crane roller rockers with oversize studs.
M. The head bolts where replaced with studs.
N. Scorpion intake manifold.
O. 850 CFM dual pump Holly carburetor.
P. Mallory dual point distributor with cable tachometer.
Q. Mallory Coil and coil booster.
R. 7″ wide Mitchell aluminum rims.
S. Steel rear black rims with paddle tires. BFGoodrich trailer tires.
T. New Simpson five point harness seatbelts.
I have the original Front windshield and backseat.
I also have the pistons for 10 to 1 compression.
This Jeep does 4.6 seconds in 100 yard dash at 70 miles an hour. ”
http://phoenix.craigslist.org/evl/cto/5732033515.html
This has a good old-time-jalopy look to it.
“Hello all- I need to make time for other projects and have to let this one go. It’s a 62 Willys Jeep pickup. Same body from late 40s. It’s already chopped, dropped and tunneled. Lid is ready for a ragtop or a fill in. Doors shaved on exterior but interior handles still work. Not finished but not a total basket case. 230 straight 6 engine runs but needs tranny rebuilt, tires and brakes. Fun little project and not much to get ready to roll. Leave it ratty or go full out hotrod with a different grill and paint. Have pink and it IS registered non op with matching frame and body tag. Price is FIRM ( it has more than that in body work) NO TRADES.”
http://orangecounty.craigslist.org/cto/5794025380.html
UPDATE: **SOLD** Was $850.
This rare top looks in good shape.
“Jeep CJ5 (not CJ7), fiberglass hardtop by Acme. Fits 1976 and newer but will work with earlier CJ5 or M38A1 using a 1976 or newer windshield frame, ( I have some of these for sale). Very nice condition. Paintable to any color. $850. ”
UPDATE: **SOLD** Was $600.
There may be value here.
“for sale is a metal Meyer half cab and doors with a CJ5 body tub. you must take tub if you want the top. and no, the frame, running gear and title are not for sale. email me your phone number for more details, condition etc.”
Looks like a Sears cab.
“WILLYS CJ2A single cab / halfcab hardtop for civilian jeep 1946 1949 – $550”
http://seattle.craigslist.org/see/pts/5786808671.html
No pics provided.
“Totally rebuilt, to much to mention. Call if you want more info or more pictures.”
Not quite all original parts. This was previously listed here. Seller believes this was a US Navy Jeep, but I don’t see any evidence that this was the case. I’m wondering if this is an M-38 engine (number begins with MC).
“I have a 1946 Willy’s jeep MC7 has been restored and is all original parts.Willys is in good shape has new paint job front has been replaced on axle new.This jeep runs and drives good.Has about 3 hours on motor has been rebuilt.The Willy’s jeep is 1946 U.S.Navy jeep this is number 7 of the MC 7 has clear title.T his is a cash only sell.”
http://jacksontn.craigslist.org/atq/5786014253.html
