emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: **SOLD** Was $4500.
(01/05/2014) Looks good.
“Willys flat fender, Buick V6, super T-10 4 spd updated GM power (tilt) steering, relocated 20 gallon rear fuel tank, full cage, 538 gears, full roll cage, racing front seats with full harnesses, wranger rear seat, Ramsey winch, offroad lights, custom bumpers, wiring all new.”
UPDATE: Was $2400. **Status Unknown**
Nonrunning project.
“ bought several of these cool, pug-nosed Willys Jeep FC170s, FC150s and a BUNCH of related parts to get the stuff I want/need for my own project. This one is rough, but in my opinion, restorable. I’ll sell this truck complete (with title), or will consider selling parts for the right price.
This is considered a 3/4-ton pick-up with a Dana 44 closed-knuckle front axle, and a Dana 53 rear axle. The truck rolls free (axles/brakes are NOT locked up), and the drivetrain (engine/transmission/transfer case) is still installed, although I have no idea as to the mechanical condition. Engine is the Super Hurricane inline 6-cylinder mated to a T90 3-speed manual trans.
The frame looks good on this truck, and the cab appears to be repairable, although it’s arguably rough (common for Midwest vehicles of this vintage). Someone retrofitted what appears to be a ’50s GM dash into the truck, and did a pretty good job doing so. If you’d prefer to go back to a stock dash set-up, I have interior parts available.
NOTE: Parts in the rear of the truck will be cleaned up before it’s sold.
I have a few FC170 vehicles available, along with a nice FC170 rolling frame, a couple FC cabs (one FC170, and one FC150), and lots of parts. If you’re looking for a custom project, consider putting one of these classic FC cabs on a late-model chassis, much like I’m doing with my project: http://www.pirate4x4.com/forum/jeep-non-hardcore/1558953-jeep-fc170-patina-rod-mutt.html
Located in Cedar Springs, Michigan (49319), just north of Grand Rapids.”
http://grandrapids.craigslist.org/cto/4512800342.html
I don’t know if the diamond plate is for protection or patching.
“1947 Willys jeep c j 2 A
38k original miles.
Original flathead 4.
New tires and wheels.
Starter and generator overhauled.
New batterie and carburetor.
Comes with towbar and collectors licence plate.
Asking 4700$
Contact by email
serious enquires only!”
http://wenatchee.craigslist.org/cto/4511266616.html
UPDATE: **SOLD** Was $2000
Hasn’t run in a while.
“1949 Willys CJ3A Jeep with plow. Hasn’t run in approx. 15 years. Engine turns over freely. Has been kept in garage under cover. SERIAL # CJ3A-36289. $2000 or best offer. Frame on vehicle is solid.”
UPDATE: **SOLD** Was $1800
“or sale a 1947 Willys CJ 2A flat fender Jeep. This civilian Jeep has no motor but a very straight body with minimal rust. This would make a great father/son project or create a crawler, Rubicon Wrangler, swamp buggy offroader Hollister hauler. The price is $1800″
UPDATE: **SOLD** Was $2000.
(06/02/2014) Looks like it could use a little work.
“Needs a carburetor and the muffler welded on and it’s ready to go. Muffler comes with it.
Has a Buick V6
In pretty good shape interior could use some work.
Email if interested.
Not interested in trades, sorry.
$2000 OBO””
UPDATE: **SOLD** Was $9800
(10/17/2013) Not restored, but nicely refurbished.
“1947 Willys Jeep for sale. This jeep has been restored from top to bottom, I have over 19000.00 into it. It needs tires and rims to finish the complete restoration on it. I am asking 9800.00 well worth the money.”
UPDATE: Was $12,000. **Status Unknown**
“Willys delivery wagon all original flat head 6 , 3 speed , 4×4 looks and runs great”
Andy Brown forwarded this great photo in Normandy outside the tank museum near Carentan. Andy notes they were expecting over 200 jeeps at the event.
On September 7, Bob Christy is hosting another Northern Ohio Flatfender day at his place in Green, Ohio. See all the info below:
UPDATE: **Status Unknown** Was $12,000
Not a great photo.
“Jeep/Truck with cedar rack. New motor and transmission. New brakes.”
Rough, but may run.
“This 1947 Willy’s Jeep CJ2A has a 1976 Ford Pinto four cylinder engine. 4 wheel drive”
http://kansascity.craigslist.org/cto/4512311451.html
