To Top

1960 FC-150 Rogue River, Or **SOLD**

• CATEGORIES: FC150-FC170-M677 • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  Price was $2500.  **SOLD**

Engine is out.  There is a minor title issue.

“Up for sale is a 1960 Forward Control FC-150 truck. This is an amazing original condition truck that has been kept under cover for the last 10-12 years I’ve owned this truck. This truck has the original two-toned paint still on it! There is NO rust in the usual places for these trucks. No cancer (rust through) that I can see, just minor surface rust. This is the first year of the wider axels for better stability. I was converting this truck to a Buick V6. I have most the parts, including the engine, bellhousing, flywheel, clutch & exhaust. The engine is currently NOT installed in the truck. Installed in the truck is the original transmission, with WARN OVERDRIVE. It is a 4×4. The drivelines are installed as well. It does have the engine cover that goes inside the cab! Back fenders are slightly modified, but could be returend to original shape. Modified to fit a 5 gallon gas can on either side. This was a good idea as it adds weight over the rear axels. Breaks do no work in the thuck however, the emergency break does. Front windshild is in good shape, which is the important one! Back & side windows need glass replaced. The side windows do roll up & down. Tires hold air but are old. I have the title to this truck. However, the husband signed over and the wife did not as she had passed away. Oregon DMV said that to correct this You need to get a death certificate which can be obtained from the state or county. OR if you turn in the title to DMV and it shows the person as deceased, there is no issue.

[fb_button]
 
To Top

1948 CJ-2A Bakersfield, CA **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500.

I guess this jeep was used to back into hunting areas, hence the cammo is only on the back.

“260 NAIL HEAD BUICK MOTOR-RUN’S GREAT. HAS BILL OF SALE, BUT NO PAPERWORK, NOT STOLEN JUST HAVEN’T HAD THE TIME.”

[fb_button]
 
To Top

1951 Model? Dos Palos, Ca $5000

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

No pics provided.

“I have a 1951 Willy jeep great little jeep all original painted blue brand new mud tires still has windshield and winch ben sitting for a few years started messing with it again but I rather have the cash or trade plus cash for cummins or duramax $5000obo need to sell call or text Tyler at (209)-509-5464 ask for pics”

http://fresno.craigslist.org/cto/3004074570.html

[fb_button]
 
To Top

1956 M-38A1 Pahrump, NV**SOLD**

• CATEGORIES: M-38A1 This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** was $2650.

This had such an unusual bumper, that I thought I’d post it.

“SELLING OFF TOYS … 1956 WILLYS JEEP CJ. $2650.00 WITH A PTO WINCH, DANA 18 , T 90 3 SPD. TRANS. 1965 289 ENG. ORIGINAL FRONT AND REAR SEAT FRAMES. WILL RUN!!!! IN GREAT SHAPE.. ONLY SERIOUS CALLS PLEASE. NO BLOCKED AND PRIVATE CALLS, WILL NOT BE ACCEPTED…NO ANSWER LEAVE A MESSAGE WITH NAME AND NUMBER. PLEASE SPEAK CLEARLY.”

[fb_button]
 
To Top

1951 Wagon Long Beach, Ca $6900

• CATEGORIES: Jeep Rods, Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

I can’t say I’ve seen a double barrel shotgun shifter.  This does need a little work.

“Up for sale is a 1951 Willys Wagon with a newer rebuilt Chevy 283 motor with a 350 trans, runs real well. Wagon has custom exhaust, vintage octogon wooden sterring wheel, new tires, great brakes, all lights work, custom double barrel shotgun shifter, with the original BLACK License plates! Wagon was lowered 3 inches and has a real nice stance. Interior is all there but will evenutally need some updating, has original bench seat, with a slot in the back for another one, original wood paneling on the floor, and gauges. Windows have some cracks but i think it adds charecter seeing they are all original, windows go up and down as they should but are a bit tight. Doors both open but will need some work to get them to open, close, and lock as they should, all pretty standard for a car thats 60 years old. Only rust spot is right below the drivers side cowel, no other rust noted. The bottom was completly sprayed with undercoat protectant POR 54, the car really looks clean and O have yet to see antother one on the road.

Overall runs really well, hits 65 mph on the freeway no problem and will run all day, no overheating what so ever. She leaks oil as all old cars do but nothing out of the ordinary, it does have slight blowby coming out of the valve cover vents, needs a PCV valve installed.
I have the hood and the front fenders and they will come with the car, they will need to be extended about 5 inches to fit the front end again due to extending the front grill to install an aftermarket electric fan. Easy work and can be done at any metal fab shop.

Want a car that turns heads every day, this is the one. Would make a killer surf wagon or beach crusier!

Looking for $6,900.00 obo or trades worth the same value, possibly a little up or down. Not looking for an car or truck newer than 1970 unless its a muscle car, prefer running and street legal with all documents. Vintage motorcylces are a possibility.
I have the pink.

Please no junk and no lowball offers. I have pleanty of pics. shoot me an offer and or email me with questions, leave a phone number and I will call you right back!!”

http://losangeles.craigslist.org/lgb/cto/3005398193.html

[fb_button]
 
To Top

4 15×10 Rims Tacoma, Wa $100

• CATEGORIES: Tires and Rims This site contains affiliate links for which I may be compensated.

I’m sure someone could use these.

“I am selling a set of 15×10 inch rims that fit the big ford pattern. This is the same bolt pattern used on the older jeeps willys and suzuki, I bought these for my jeep but have the wrong back spacing for my jeep. These are the white spoke rims that clean up nice. These are not bent up or chewed up. I just cannot use them on my rig if I plan on driving it on the public roads. Asking 100 dollars or best offer.”

http://seattle.craigslist.org/tac/pts/3005414065.html

[fb_button]