To Top

1957 FC-150 Dubuque, IA **SOLD**

• CATEGORIES: FC150-FC170-M677 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $1200. This was for sale earlier this year.  It appears to have a new owner who is selling it.

(02/16/2012) It runs, but has rust.

“For Sale is a 1957 Willys Jeep FC150 or Forward Control 150, serial number shows that this is the 68th one made out of only around 30,000 units made bewteen 1957 and 1964.
Runs and drives, 4WD, 3 speed manual, 2 speed, single stick transfer case, 4 cylinder engine (Hurricane 4 I believe,) I believe it has around 24,xxx miles. has engine driven hydraulic pump and lines still attached. Did have snow plow attached before I bought it.
Tires are dry rotted but hold air, have tubes in them but will need to be replaced soon. The transfer case does shift into all ranges but the front hubs need to be replaced, the front driveshaft spins but the hubs don’t engage. I bought it this way
and never had the time to replace them. Needs driver side window replaced, all the guts are there and you can get a window cut at any auto glass store in town. Needs a lot of body work, paint, weatherstripping, etc. Basically needs to be restored.
The headlights, tail lights and beacon on top all work but wiring was cobbled together by previous owner. Could use a new battery as well, and a choke cable. Hard starting in the winter, carb needs rebuilt but will throw in a rebuild kit that I bought. I will include the front bumper that is in the back and the big gas can as well. This is a rare truck and a good project,
however is not roadworthy so you will need to bring a trailer. Selling due to relocation out of state. Has a title and will throw in a service manual as well. Asking $1200 obo”

1957-fc150-dubuque-ia1 1957-fc150-dubuque-ia2 1957-fc150-dubuque-ia3 1957-fc150-dubuque-ia4

 

[fb_button]
 
To Top

Wanted: Combat Rim and some NDT Tires Auburn, CA

• CATEGORIES: wanted This site contains affiliate links for which I may be compensated.

“I have a trailer i am rebuilding.. i need 1 Combat wheel for jeep / MB / CJ2A / Or Military Trailer … they are 2 peice with bolts .. Pic attached.. of what they look like..
916 208-0727… let me know what you want for it..
I also need some good shape NDT Tires… (non directionals Military ones).. I need 2…
It is 16″ tall by 4.5” wide… “

[fb_button]
 
To Top

1953 CJ-3B Hesperia, CA **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1350.

(09/13/2012) It needs some work.

“1953 Willys cj3b, has original axles with new ring and pinion and seals. Has original trans and driveline, Block was bad, have head, carb, starter and various other parts to f-134. Body is in good shape for year, no major rot or damage, floorboards are 100%. I have set of BF Goodrich’s on alloy rims that come with jeep. Has new master cylinder and most of brakelines replaced as well. Has no windshield. Started restoration and don’t have time to finish, thanks.

[fb_button]
 
To Top

Year? CJ-2A Schuylerville, NY **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500

”  Up for sale is my Willys flat fender Jeep. I’m not sure of the year; my amateur research shows the body maybe 1953 or around that time. The chassis appears to be maybe from 1970-1973 due to the fact that it has power steering and full spring shackles. This vehicle has been used on my property for the last 10 years, and has been a most reliable tool for the tasks I needed done here. It has no paperwork, and is really the culmination of several vehicles. It has a Chevy 4cyl engine; I think a 2.5 liter. It has electronic ignition and a new carbureter. There are two batteries; one for the chassis and one deep cycle for the 8000lb Smittybilt winch. They are switchable, so you can use either one or both together depending on your needs. I added new military leaf springs ( 12 leaf M38) at all four corners, and a limited slip in the rear differential with 4.88:1 gears. It has brand new tires with less than 1 mile on them, new brakes, new GM internally regulated alternator, and recored radiator. Sorry for the long post but wanted to include as much as possible so phone time isn’t wasted”

year-cj2a-schuylerville-ny1 year-cj2a-schuylerville-ny2

 

[fb_button]
 
To Top

1946 CJ-2A Glens Falls, NY $8,500

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $8500.

(10/18/2012) This has a whole bunch of updates and runs on propane, but still uses an early (if not the original) flathead motor.

“matching numbers,frame off restoration. rebuilt motor,transmission, transfercase. (pictures and receipts to prove it) Dana 30 front axle with high steer and heim joints, Ballistic Fabrication dif. cover, 5.38 gears (new gears, bearings and seals, have receipts) Dana 44 flanged axle rear, locker,Ballistic Fabrication dif cover, 5.38 ratio ( new gears, bearings and seals, have receipts) Saginaw power steering upgrade, PSC Motorsports Rock Crawler power steering pump and remote resevior, Painless Wiring harness 12v, all switches are Painless, Painless waterproof switch box, Powermaster 155 amp altenator, LED lights, Smittybuilt 8,000lbs winch w/ synthetic rope, motor runs on propane!!! Fully fabricated professional rollcage (1.625 DOM x .120) tied into frame, rock sliders, front and rear bumpers custom. 5″ lift kit, heavy duty shackles, 32″ super swamper tsl like new, mickey thompson beadlock, goodridge braided brake lines, simpson seatbelts, Derale electric fan, 12v electronic ignition. Everything has been meticulously gone through, inspected, rebuilt or replaced. It runs flawlessly , operates amazingly. Im sure there are some things i have forgotten but I HAVE RECEIPTS FOR EVERY SINGLE PART PURCHASED!!!!!!! Over $11,500 just in parts, not including front and rear axle and all the machining and fabrication time. I left the body original because i like that look and have had alot of compliments, but you could redo the minor work needed to the body and have a brand new jeep!! Please do not waste my time with petty trade deals, or low ball offers. It is worth every cent i am selling it for!!! Call or text 518-791-8three8two”

http://albany.craigslist.org/cto/3543664076.html

[fb_button]
 
To Top

1948 CJ-2A Renton, WA **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $6850

(02/17/2010) “1948 Willys CJ2A, hand built rock crawler
Engine…4.3 V6 TBI (computerized) electric fuel pump, Novak adapter…
Transmission…SM 465…4 speeds (6.54 low) 90:1 crawl ratio (goes SLOW)
Hydraulic Clutch.
Axles…Dana 44 front & rear. Loc-Rite lockers frt. & rear
Full floater kit, (all 4 corners can be locked/unlocked)
Brakes…11” disc all 4 corners, power with Proportional Valve
Tires…..Goodyear MTR 33 x 12.5 x 15…steel wheels with deep rims.
Winch…WARN 8274 upright with new cable.
Body was sand-blasted, holes filled, NO rust…painted Viper Red.
Inner body was Rhino-lined. Half doors, bikini top, great heater, Tilt column, full cage, huge tool box, locking console, CB radio
Clean & Clear WA. Title with permanent license.
Trail ready and can also be street driven.
Better than a Rubicon. It has been used for 10 years so not perfect but is a nice jeep.
$30+ K invested.  Health issues force sale.”

[fb_button]
 
To Top

1947 CJ-2A with extras Kasson, MN $4500

• CATEGORIES: CJ-2A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $4500

(11/15/2012) Bob spotted this unusual farm jeep for sale.  I haven’t seen a front bumper quite like that one; Maybe it’s a different version of a service/garage front bumper?  It looks like it’s had a little body work on the side.  The lift is some kind of Ford/Farmall adaptation according to John. The CJ-2A page had a discussion about this from 2010: http://www.thecj2apage.com/forums/1947-willys-my-first-jeep_topic15262.html

“Decided to sell my 47 Willys. Bought it at an auction a couple years ago. I have done some work to it but it still needs more and just don’t have the time for it. It has a four cylinder ford motor in it. I put a rebuilt carb on it, but it still doesn’t idle very well. Starter is new, brake lines are new, Master cylinder is rebuilt but brakes are not working. Needs wheel cyliders most likely.
It has a factory PTO on it. It also has a 3 point hitch on it. Don’t know if is factory option or not but it is pretty cool!
There are a lot of other things mounted on it, not sure what some of them are for. My best guess is that it had a wing plow mounted on it a some point.
Was going to use it for food plots and other various tasks around the farm. I bought a tractor so I don’t really need it any more. Hopefully someone can give it the time and attention it deserves.
Can deliver for an extra charge. Thanks, Pete”

218-849-5666″

http://rmn.craigslist.org/grd/3535902828.html

[fb_button]
 
To Top

Russo And Steel 2013 Auction Jan 16-20, Scottsdale, AZ

• CATEGORIES: Auctions, CJ-2A, CJ5, FC150-FC170-M677 This site contains affiliate links for which I may be compensated.

The Russo and Steel auction features several different jeeps.

1. 1960 DRW FC170: http://www.russoandsteele.com/collector-car/1960-Jeep-FC170-DRW/39242

1960-drw-fc170-russosteelauction

2. 1958 FC-170: http://www.russoandsteele.com/collector-car/1958-Willys–Jeep-FC170/29662

1958-fc170-russosteelauction

3. 1957 FC-150: http://www.russoandsteele.com/collector-car/1957-Willys-Jeep-FC150/34072

1957-fc150-russosteelauction

4. 1949 CJ-2A: http://www.russoandsteele.com/collector-car/1949-Willlys-Jeep-CJ2A/29552

1949-cj2a-russosteelauction

5. 1947 CJ-2A: http://www.russoandsteele.com/collector-car/1947-Willys-Jeep-CJ2A/34332

1947-cj2a-russosteelauction

6. 1970 CJ-5: http://www.russoandsteele.com/collector-car/1970-Jeep-CJ5/41682

1970-cj5-russosteelauction

7. 1944 Flattie: http://www.russoandsteele.com/collector-car/1944-Ford-Willys-MB-GWP/43332

1944-flattie-russosteelauction

[fb_button]
 
To Top

1950 Jeepster Lethbridge, Canada **Status Unknown**

• CATEGORIES: Jeepster • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Status Unknown. Was priced at $12,500.

“One of a kind 4×4. Originally 2wd It has a Rebuilt 304 AMC with a trubo 400 trans
and Quad track Tcase. It is on a Wagoneer frame with Dana 44 front and rear with a 4″ lift kit.
It is on 32″ tires. Has power tilt steering and power disc brakes. It has a new top that needs to be installed. All original bows are there. Its a driver that can be driven anywhere.
No Rust in body. Gets a lot of looks. $12,500. Located in Lethbridge”

1950-jeepster-calgarly

[fb_button]