To Top

Fermel Utility Jeeps from South Africa

• CATEGORIES: Features, Fire/Police/Industry Vehicles • TAGS: , , , This site contains affiliate links for which I may be compensated.

UPDATE: Originally published February 17, 2015, it now looks like these vehicles are no longer produced. Jim notes that Fermel is no longer in business.

After publishing the post about the Union Mine Jeeps, Marc found a website that features new ones. A South African company called Fermel makes four different utility vehicles. The webpage for each jeep includes a video of each respective jeep.

1. Mini UV Emergency Vehicle: A light utility vehicle with permanent 4 wheel drive and a maximum payload capacity of 1500 kg. Built on a unique Meccano Type chassis
Features Include :
Blue Flashing Light , Siren , Roller bed & locking point for stretcher , Lockable cabinet , Overhead oxygen bottle rock , Drip hooks, Defibrilator carring points , Rubberlined rear , Fabric Lattice tailgate , Foam cushions , Flourescent lights at rear.
Fermel-MiniUV_EmergencyVehicle_a

2. MIni UV LDV: Categorized as a light utility vehicle, the MINI UV LDV is a 2 seater, 1500 kg payload capacity underground machine. The loadbay is ideally suited for materials transportation. The vehicle features permanent 4 Wheel Drive , a unique meccano type chassis and wet multi disc brakes inboard axles. Load area for carrying general materials.

Fermel-MiniUV_LDV_GEN

3. Mini UV LWB: A permanent 4 Wheel Drive , light utility transporter with a payload capability of 1000 kg. A seating capacity of 4-6 passengers. Built on a unique meccano type mining chassis , the MINI UV is a mining vehicle designed for use in harsh operating conditions. The vehicle is equipped with a DEUTZ 4 cylinder air-cooled motor , COMII , EPA II Emission compliance and wet-multi disc. Service and failsafe service inboard axles.

Fermel-MiniUV_Gen_3

 

4. Mini UV SWB: A permanent 4 Wheel Drive , light utility transporter with a payload capability of 1000 kg. A seating capacity of 4-6 passengers. Built on a unique meccano type mining chassis , the MINI UV is a mining vehicle designed  for use in harsh operating conditions. The vehicle is equipped with a DEUTZ 4 cylinder air-cooled motor , COMII , EPA II Emission compliance and wet-multi disc. Service and failsafe service inboard axles.

Fermel-MiniUV_SWB_Gen1

[fb_button]
 
To Top

Wood Rocking Jeep Apple Valley, CA $425

• CATEGORIES: Features, Models This site contains affiliate links for which I may be compensated.

This is unique.

https://www.facebook.com/marketplace/item/664625055450452

toy-jeep-av-ca5 toy-jeep-av-ca6 toy-jeep-av-ca7 toy-jeep-av-ca8 toy-jeep-av-ca9

“1942-1945 military CJ-2A style rocking jeep custom made by High Desert wood workers association. One of six made. We gave one to our sponsor Lowes of Apple valley, and the rest went to call for life for kids for Christmas gifts as well as 24 doll carriages we made. We would like to sell this one asking price is 425 or a reasonable offer. It does rock and is painted with Sherwin Williams paint and all hand made by the members of our wood club. Please message us or text at [hidden information]. Would make a great collector item and or a gift. Located in Apple Valley, CA may consider trades.”

[fb_button]
 
To Top

1946 CJ-2A Eastern NC $16,000

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

Many updates and a flathead V8 on this new/old school rebuild.

https://eastnc.craigslist.org/cto/d/winterville-1946-willys-cj2a-jeep-built/7569992213.html

1946-cj2a-eastnc5 1946-cj2a-eastnc6 1946-cj2a-eastnc7 1946-cj2a-eastnc8 1946-cj2a-eastnc9

“1946 Willys CJ2A Hotrod Ratrod Jeep
Classic CJ2A body and chassis with upgrades for trail performance and modern-ish convenience, 100% road legal, with clean NC title.

Body: Vintage 1946 CJ2A, various repaired areas and patch panels, structure is ¾”x1- ½” x .080” wall rectangle tubing, poly body mounts, vintage hood with heat scoops, vintage front fenders and grille, vintage windshield with original glass and PA state inspection sticker from 1979, full paint with Rustoleum Gloss Army Green (easy touch-up after trail contact), 2” body lift, clearanced rear wheel openings

Frame: Vintage CJ2A with gussets, new spring perches, 6-point roll cage with rock sliders, custom transmission cross member, cross bars, and rear underbody winch mount
Continue reading

[fb_button]
 
To Top

1946 CJ-2A/M-38 Lexington, SC $5500

• CATEGORIES: CJ-2A, M-38 This site contains affiliate links for which I may be compensated.

This is a project with 2A and M-38 parts.

https://columbia.craigslist.org/pts/d/lexington-1946-jeep-willys-cj2a/7569754632.html

1946-cj2a-m38-lexington-sc6 1946-cj2a-m38-lexington-sc7 1946-cj2a-m38-lexington-sc8 1946-cj2a-m38-lexington-sc9

“1946 Willys CJ2a
This is a franked jeep project,
not for the purists

M38 tub and fenders, windshield frame
Buick V6, T90/Dana 18
Dana 41 rear axle, Dana 25 front

The project is not done, needs someone to finish it.

Upgraded suspension to 76-83 CJ5 stock springs
Rebuilt transmission and Tcase
Buick 225 V6, bottom end was clean, resealed it. Heads were rebuilt
HEI ignition
Power steering
Upgraded master cylinder to dual circuit MC
Front drum brakes are 11” drums, rebuilt
All new brakes lines
All new fuel lines
Brand new tires
New seat cushions and upholstery
Advanced adapters chain linkage upgrade for clutch
New Gauges
Continue reading

[fb_button]
 
To Top

1946 CJ-2A Parts Port Charlotte, FL **SOLD**

• CATEGORIES: CJ-2A, Parts This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1200.

Maybe this will interest folks.

“46 CJ2A complete body for sale. Should be fully restorable. I was going to restore but, time has moved me in a different direction. Grill, hood, frt fenders and tailgate in good condition. Tub needs work but, fixable. I have 2 windshields buyer gets choice. $1200.00
Also have tranny needs rebuild been sitting outside. PTO tail on it. 100.00”

1946-cj2a-ptchar-fl7 1946-cj2a-ptchar-fl8 1946-cj2a-ptchar-fl9

[fb_button]
 
To Top

CJ-2A and CJ-3A Billings, MT $4000

• CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.

Parts or projects.

https://www.facebook.com/marketplace/item/1470830543439929

cj3a-cj2a-billings-mt8 cj3a-cj2a-billings-mt9

“willys cj2a with body is a parts vehicle for the cj3a without the body. I have another tub in better shape but still not great. Bunch of new parts, old parts, and extra parts. Jeep with no body is in great shape. Frame is solid and unmodified, suspension is not hammered, Everything is still 6 volt. New battery and hold down, new starter and generator, all ignition parts are new. Rebuilt carter wo carb Comes with a bunch of new and old parts Engine runs but needs rebuilt Great start but my plans have changed and i wont be able to finish this project. Dont have to sell but the extra space would be nice. Please serious offers only 4000$ obo”

[fb_button]
 
To Top

1960 FC-170 Winter Park, CO $5000

• CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(05/29/2021) Has an updated powertrain.

https://www.facebook.com/marketplace/item/5639861369359339/


1960-fc170-winterpark-co“Rare chance to own a piece of Jeep Willy’s history! You don’t see these very often. Here what may be your only chance to own the coolest truck in town! I’m Selling this 1960 Jeep willys FC-170. It is not a FC-150 with the short bed, this is the 3/4 ton with a 9’ bed. This particular truck used to be a hooker/ tow truck at some point. Very good patina. Not as rusty as you may think. I have 10 of them and this is one of my better ones. Very solid bones. No motor or trans. CLEAN TITLE IN HAND Not interested in trades. $6000 cash only Located in Grand County, Co. Can deliver anywhere for fair price.”

[fb_button]