To Top

1953 CJ-3A Wenatchee, Wa $3000

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

Someone took the time to get some nice pictures with this jeep.  It sure makes the jeep look good.  I’m not even going to mention that this was the last year for the CJ-3A model, but not for the body (later used by DJs of course).

“Barn find original (mostly) CJ 3A, last year for this body style. 4 cylinder engine runs real smooth, 4WD works, goes down the road and up a trail fine. Licensed for the street, with a clean title ready to sell or trade. respond to craiglist reply. Thanks for looking”

http://wenatchee.craigslist.org/cto/3055723714.html

[fb_button]
 
To Top

Flattie Wanted: Trade for Snowmobile & Trailer? Central Ma

• CATEGORIES: wanted This site contains affiliate links for which I may be compensated.

Mike wrote to me yesterday.  He’s looking to trade for a jeep.

Mike writes, “I discovered your website about a month ago while looking for a willys to fix up. I am looking for a 1940s or early ’50s willys that someone is willing to trade for a snowmobile and 2 place trailer (est. value of $2500). I am hoping you may be able to help me with this as i haven’t had much luck on my own. i would like to find one that needs some work, but not something i need to start from scratch with. as long as the motor isn’t frozen and there aren’t any holes in the body, i think i could work with that. I am located in central Ma, so something within 10hrs drive would be preferred.”

So, if you have anything you think Mike might like, contact him at: m.holm.sfd at gmail.com or contact me d@ewillys.com.

 

[fb_button]
 
To Top

1940s MB with Rocket Launching Kit (Toy) Leetsdale, Pa $139

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

I really couldn’t say just how rare these toys are.  However, there was one for sale in 2007 for only $65 at G503.

I did learn that the jeep on which this was based is called both a Willys MB Calliope or a MB with a Rocket Launcher unit.  I’m sure someone else knows more about this than I.

“DANBURY MINT 40’s Willys World War II ROCKET LAUNCHER Jeep Replica with Detachable and Adjustable Angle Launcher. Produced in 1995. Finished in Olive Drab. Diecast 1:16 Scale.

VERY RARE! Great Collectible for the War Veteran or Military Collector. Beautiful Condition!
If interested, please contact Rose at 724.251.4772 or email a response to this posting.”

http://pittsburgh.craigslist.org/clt/3056661107.html

[fb_button]
 
To Top

1948 CJ-2A Coeur D’Alene, ID **SOLD**

• CATEGORIES: CJ-2A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3000

Looks like a Bobcat Fiberglass body.

“48 willys jeep. 302 ford, T-18/dana 20. 60/44 disc brakes and moser spools/axles, 38.5 sx swampers on 15″ steel wheels. all fiberglass body, comes with soft top.
$3,000obo.”

[fb_button]
 
To Top

1947 CJ-2A Healdsburg, Ca **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Was $9500. **SOLD**

It could be the pics, but the underside doesn’t look like it’s been completely rebuilt and painted. Looks solid.

“RARE SECOND OWNER 1947 WILLYS JEEP. I BOUGHT THIS IN 1996 FROM THE RANCHER’S FAMILY WHO BOUGHT IT NEW IN GEYSERVILLE. I REBUILT EVERYTHING; ENGINE, CARB, TRANSMISSION, TRANSFER CASE, ELECTRICAL, UPHOLSTERY, AND PAINTED IT. I HAVE ONLY DRIVEN IT TO DOWN TO THE MAILBOX NEVER USED OFF ROAD, NO RUST NO ABUSE. RUNS GREAT. EXCEPT FOR NECESSARY MODERNIZATION THIS IS THE ORIGINAL JEEP AND ITS PARTS. REQUEST MORE PICTURES OR COME SEE. I HAVE RECEIPTS.”

[fb_button]
 
To Top

1951 CJ-3A Project Bend, OR **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $2500

“I really hate to sell this but times are tough and need the money. 1951 willys cj3a rock crawler project, 4.3 vortec v6, th400 auto, advanced adapter, dana 20, and toyota pickup axles on 37″ super swamper SSR’s. frame is boxed front to rear. 1/4 eliptical rear suspention mocked up, and most of the parts for coils and a 4 link in the front. motor and trans are just sitting in the frame rails for mockup, no mounts or cross member built yet. the tube was really in bad shape so I cut it down and started over, no skins on the tube yet but I have a 4′-8′ sheet of steel for them.”

[fb_button]
 
To Top

1962 FC-150 Farmington, NM **SOLD**

• CATEGORIES: FC150-FC170-M677 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: SOLDI .. was listed at $3000.  No motor or trans, but otherwise looks good.

“Clean project. original glass, paint, all interior exterior parts there and in good condition. No motor, trans, transfer. Good NM title,”

[fb_button]
 
To Top

1954 CJ-3B Yuma, Az **SOLD*

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $700.

Yep, this is a steal.  No motor though, but the body looks great.

“For sale Project 1954 Willys CJ-3B Jeep. Nice little jeep has transmission and transfercase, no motor. Clean title. Asking $700.”

[fb_button]
 
To Top

2 1947 CJ-2As Vestaburg, Mi **SOLD**

• CATEGORIES: CJ-2A, Last Ride This site contains affiliate links for which I may be compensated.

UPDATE:  SOLD.  Were priced at $650.

Both are pretty rough.

“2 willys jeeps, 1 complete other for parts. Neither jeep runs. Package deal. Please no emails call only.”

[fb_button]
 
To Top

1953 CJ-3B Meadowland, Co $2700

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

There is some work to be done on this. Looks like something hit the passenger’s side.

“For Sale is a 1953 Willys CJ3B.

I started to restore this old jeep but decided to pay off some debt instead! (Thanks Dave Ramsey)!! I will tell you as much as I know about this great old Jeep.
We rescued this jeep from Canyon City Colorado sitting in a field. At some point in the jeeps long history, somebody replaced the engine with a ford 302 and cut up the front of the frame. When I purchased it, I decided that the old flat four should go back into the jeep so that is what I did. I found a good running gear complete with engine, transmission, transfer case and the whole works, frame included. I swapped the CJ3B body onto the new frame and running gear. That was the beginning of the restore. This jeep is not complete but would not take much to complete.

Here are a few things that I know for sure need to be completed before it can be driven. The wiring needs to be completely redone thanks to the ford engine swap. I was going to do the painless wiring from Kaiser Willys. The tires are completely shot but they do hold air. The brake system needs to flushed to be right but they did work a little when we unloaded the jeep. The clutch needs to be adjusted but it does work.

Here are some of the great things about this old classic. I painted the old jeep back to close to the original color and paint scheme. Wow have times changed!! The seats will work well and the frames are in good shape. It has a roll bar that is in good shape and bolted down. The inside of the tub is ready for some rhino liner. The engine DOES run well!! A little smoke from sitting for a while but sounds great.

I can tell you that this Jeep will never win any car shows but damn it still looks good for an almost 60 year old rig!! Yes there is rust under the floor pans but the pans themselves have been patched. There are dents and holes from previous proud owners having fun in this old Jeep making memories so I decided to leave them to tell a story!! Come take a look. I can’t meet you anywhere with it since it does not drive. I ensure you that if you are looking to restore an old jeep to make you smile and remember the good ole days or are looking to take the kids out for ice cream, this might just be it. It needs work and yes you will need a trailer or dolly to get it to its new home.

I do have some extra parts that will go with the CJ3B when it is sold. I might even find an extra Dana model 18 transfer case to pitch in the back.
Give me a call if this might be what you are looking for.

Eric
Cell 719-964-2138 Thanks for looking!!”

http://cosprings.craigslist.org/cto/3055741281.html


[fb_button]