To Top

1969 Dually CJ-5 Red Hook, Ny eBay

November 22, 2009 • CATEGORIES: CJ5 • TAGS: . This site contains affiliate links for which I may be compensated.
1

I haven’t seen many dually CJ-5s.

“1969 CJ-5 Jeep Dually, 4cyl, 3sp unit with a dana 70 rearend. Jeep originally had a trencher unit mounted to it. The trencher is long gone, sorry. Jeep has low mileage and runs well. New rebuilt carb, recent tires, new battery, new brakes (currently a little spongy, will bleed before auctins end), heater(aftermarket), wiring harness (painless), etc. Not perfect, but a nice driver or property/Town vehicle. It has a clear VT registration and has been on the road recently. Body in very good condition, some small dents, coarse body work and paint. Frame is straight and clean and retains its full side plate reinforcements from the trencher. Drivetrain all sounds and looks good with a few leaks. Motor runs well, but smokes on start up and a little bit when running …”

View all the pics on eBay

1969_dually_cj5_redhook1

1969_dually_cj5_redhook2

1969_dually_cj5_redhook3

1969_dually_cj5_redhook4

[fb_button]
 
To Top

1954 M-38a1 Vallejo, Ca **SOLD**

November 22, 2009 • CATEGORIES: M-38A1 • TAGS: , . This site contains affiliate links for which I may be compensated.
0

UPDATE:  **SOLD for $7400**

Looks great!

“1954 M38A1 military jeep. Restored completely! It has a rebuilt 4 cyl. engine, new t-90 tranny. Runs excellent. Perfect body, paint, and extras! Military US Army markings. Clear Ca. title. Good tires. Canvas Top. 2 front seats with new canvas. Parade ready!!”

1954_m38a1_vallejo

[fb_button]
 
To Top

3 Jeeps = GPW, CJ-3A, M-38 Davenport, IA **SOLD**

November 22, 2009 • CATEGORIES: CJ-3A, GPW (Ford MB), M-38 This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was on eBay.

The GPW looks in the best condition, followed by the M-38 (incorrectly listed as a CJ-3A) and then the CJ-3A.

“I am selling my hobby because of a line of duty accident that has left me with no other option. these jeeps were bought at an estate auction and they only have a bill of sale, because they have always been government owned before the last owner. The CJ3A was started on a off frame overhaul and the body was set back on to sell. The GPW is as I purchased it they both ran and drove off the trailer. the last one is just parts. thank you for your interest, this pains me to do this but I have no other choice.”

davenport_gpw_ebay

davenport_m38_ebay

davenport_cj3a_ebay

[fb_button]
 
To Top

1950 Truck Sultan, Wa $1000

November 22, 2009 • CATEGORIES: Willys Trucks This site contains affiliate links for which I may be compensated.
0

This might be an interesting project for the right person.

“good wheeler project or solid restoration parts.lifted springs, rolls, ps conversion,awsome bed and gate straight panels, no emgine or trans.have front two peice tinted glass these to peices are about 250 to 400 to replace alone.bill of sale only.”

http://seattle.en.craigslist.org/sno/cto/1477655314.html

1950_truck_sultan

[fb_button]
 
To Top

1958 Truck Sedona, AZ **SOLD**

November 22, 2009 • CATEGORIES: Willys Trucks • TAGS: . This site contains affiliate links for which I may be compensated.
2

UPDATE: **SOLD** Was $6500

The price appears to be a little high, but this has got a nice raw feel to it.

“RUNS GREAT GREAT .NO RUST.PTO WENCH. STRAIT BODY.STRAIT 6 SUPER. ”

 

1958_truck_sedona

[fb_button]
 
To Top

1948 CJ-2A Kannapolis, NC **SOLD**

November 22, 2009 • CATEGORIES: CJ-2A • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $1650.

I’m not sure if this runs or not.  Looks rough, but looks very stock.

“1948 WILLYS JEEP,VERY RARE, MUST SELL,”

1948_cj2a_kannapolis

[fb_button]
 
To Top

1945 MB Worcester, MA **SOLD**

November 22, 2009 • CATEGORIES: MB • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $5000.

“times really are tough. must sell my 1945 willys combat jeep. the jeep is a work in progress. right now it runs good, no smoke or engine noises. it drives and it stops. clutch slips some in high range gears. throwout bearing is a little noisy. all gears work, 4 wheel drive with lockout hubs works perfect. has all new brakes and brake lines including all steel and rubber lines. carb was rebuilt. still needs cosmetics. fuel tank gally under the seat needs replace. has no orig tank, uses plastic boat tank now. no windshield glass floors are not perfect they have some thin spots but mostly solid. this jeep with another 1500 in cosmetic work is very valuable. I would take 5000 firm. as little as 3000 with a trade. looking for old chevy muscle.”

1945_mb_worcester

[fb_button]
 
To Top

1954 CJ-3B Colfax, CA **SOLD**

November 22, 2009 • CATEGORIES: CJ-3B • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $6200

This looks to be a very clean, nicely built CJ-3B to run well on the road or the trail.

“54′ willys rebuilt 305 chevy, Muncie 4 speed , warn overdrive, warn winch, Detroit locker. It is a nice rig… Have a brand new full enclosure and doors that have never been put on… Heater, power steering…Brand new tie rod ends and alignment… Rear rack and Jerry cans.. Ready to wheel or daily driver… May trade for?? Thanks for looking…”

1954_cj3b_lodi

[fb_button]
 
To Top

My Build: Seat Covers

November 21, 2009 • CATEGORIES: Biscuit This site contains affiliate links for which I may be compensated.
0

One thing I did not get with my $20 seats were seat covers (here’s another link on how they mount).  Kim offered to sew these together for me and, since she’s right here, I could keep my eye on them as they were being made.  These were sewed from the heaviest, nicest seat vinyl I could find from Beverly Fabrics.  Best of all, it was 50% off.

The Prototype, which is on the passenger seat, could use a little adjustment still, but the second one turned out great.  Both just need some rider time to get stretched and pressed against the seat so they will form more closely to the seats.

seat_cover

seat_cover2

seat_cover4

seat_cover6

seat_cover8

[fb_button]
 
To Top

My Build: Transfercase cover

November 21, 2009 • CATEGORIES: Biscuit This site contains affiliate links for which I may be compensated.
0

I’ve been attacking a variety of little projects to get the jeep complete.  One of those is the transfercase cover.  Mike and I had done a little trade out of which I received a stock CJ-2A rubber boot, but after testing it out, I decided it wouldn’t work.  So, I ordered a beefier and larger Dana 300 boot that did the trick.

In order to mount it, I had to build a metal cover to secure the rubber boot.  I turned to my old dissected hood for some metal.  I then cut a hole the side of the boot, drilled some holes along the side, and mounted it to my fiberglass.

Below is the Dana 300 boot and the metal piece I made:

transfercase_cover1

Below is the hold I needed to fill:

transfercase_cover2

And here it is filled.  Nothing fancy:

transfercase_cover3

[fb_button]
 
To Top

Year? M-170 Griffin, Ga $1000

November 21, 2009 • CATEGORIES: M-170 • TAGS: . This site contains affiliate links for which I may be compensated.
2

UPDATE:  Price dropped to $1000.  It runs.  Looks like a great price to me.

(07/13/09) I wonder how bad the inside rust really is.

“Up for sale is one of the rarest jeeps ever produced. It is a millitary M170 field ambulance. It has been converted to 12 volts. It does have rust in the bed and passenger floor. It would make a great restoration project or hunting vehicle. It runs and drives. The 4wd also works. The frame and drive train are in good condition. The driverside windsheild also has a crack in it. I do not have a title will be sold with a bill of sale.”

http://atlanta.craigslist.org/atl/cto/1475924496.html

year_m170_griffin

[fb_button]
 
To Top

1963 High PO 195 CI 4cyl Seattle, Wa $1000

November 21, 2009 • CATEGORIES: Engine This site contains affiliate links for which I may be compensated.
3

UPDATE: Still Available.

If you are looking for a great, unique Drag race motor (was turning 5s when it was in drag jeep in the early 90s), this might be it.

Steve says this used to be in a drag jeep with a fiberglass parkette CJ-3B body (I’ve only seen one of these – learn more about it here).  He told me the name of the jeep, but my short term memory loss seems to have kicked in ….

“Perfect for a rat rod. one of a kind pontiac tempest 4cyl, half a 389 and uses most common 389 parts, this is a high performance engine not stock, it has 10.25 comp ratio, super duty 389/421 330 hp head, balanced and blueprinted, bearings have been inspected and are in good condition, super rare Mallory distributor( stock one will be included, 4bbl intake, has extra parts that will be included (flywheel, water pump, oil pump, rods etc), Blow away the boys in the car club with this one of a kind 60’s era motor, 206 890 6233.  call with questions.”

http://seattle.craigslist.org/see/pts/1476629484.html

1963_pontiac4cyl_steve

[fb_button]