emailNeed to contact me and don't have my email? Click on email button.
About eWillys
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
“UP FOR AUCTION IS MY 1946 WILLY’S JEEP, SERIAL #21813, MODEL CJ2A. THIS YEAR RETAINS THE MILITARY STYLE WITH TOOL INDENTS IN THE BODY. THIS JEEP IS READY TO BE DRIVEN AND ENJOYED AND RUNS GREAT. THE PREVIOUS OWNER SAID THEY HAD REBUILT THE ENGINE WHEN THEY FIRST GOT IT. IT RUNS WITH 40-50 LBS OF OIL PRESSURE AT 160 DEGREES WITH AN IDLE OF 20 LBS PRESSURE AT RUNNING TEMPERATURE. IT DOESN’T SMOKE, SHIFTS GREAT, THE FOUR WHEEL DRIVE HIGH AND LOW WORKS FINE AND THE BRAKES HAVE BEEN COMPLETELY REDONE. I REPLACED ALL THE WHEEL CYLINDERS, MASTER CYLINDER, BRAKE SHOES, BOTH STEEL AND RUBBER LINES, CONNECTORS, FITTINGS ETC.. THE ADDED LOCK OUT HUBS WERE ALSO COMPLETELY REBUILT, WORK GREAT AND IT HAS NEW SHOCKS. IT ALSO HAS A NEW CLUTCH KIT, PILOT BUSING AND SEAL AND GASKET KIT INSTALLED. IT’S BEEN CONVERTED TO 12 VOLTS WITH AN ALTERNATOR. IT HAS THE ORIGINAL OIL BATH AIR CLEANER AND ORIGINAL SPLIT WINDSHIELD (ONE SIDE HAS PLASTIC INSTEAD OF GLASS AND SHOULD BE REPLACED). THE DATA PLATES ARE ALSO ORIGINAL. THE STEERING HAS ABOUT 25% PLAY, IS OK BUT PROBABLY A STEERING BOX REBUILD SHOULD BE DONE FAIRLY SOON. ALL THE GAUGES AS WELL AS THE HEADLIGHTS, RUNNING LIGHTS AND BRAKE LIGHTS WORK EXCEPT THE SPEEDOMETER WHICH READS 33136 MILES, BUT THE TRUE MILEAGE IS UNKNOWN. THE SEAT FRAMES LOOK ORIGINAL AND ARE SOLID. THE GAS TANK APPEARS TO HAVE BEEN REPLACED WITH AN ORIGINAL STYLE OR NOS TANK. THE FRAME IS VERY SOLID, THE HAT CHANNELS IN SOME PLACES HAVE SOME RUST BUT ARE OK, AND THE TIRES ARE FAIR (WEATHER CHECKED AND MAYBE 40% TREAD). THE BODY IS PRETTY ROUGH. THERE’S VARIOUS RUST SPOTS AND MANY DRILLED HOLES FOR VARIOUS TOPS AND ATTACHMENTS I’D GUESS (I’VE TAKEN LOTS OF PICTURES SO EVERYTHING CAN BE SEEN). IT’S BEEN PATCHED ON THE FLOOR AND HAS SOME WELDED AREAS, BUMPS AND BRUISES. IT’S GREAT AS IS FOR HUNTING OR AS A BACK WOODS VEHICLE, FARM JEEP OR JUST TO RUN AROUND IN. I’VE HAD IT FOR A FEW YEARS AND IT’S ALWAYS BEEN GARAGE KEPT. IF YOU WANT A PRINCESS, IT’LL NEED SOME WORK BUT COULD EASILY BE DONE BY ANY BODY SHOP.”
“A 1951 Willys Jeep for sale.
Barn fresh.
Fiberglass body, metal hood and windshield frame. Aluminum cab included (not pictured, pics available)
Sears front hubs.
$750 or best offer.
More pics available on request.
Thanks for looking.”
“Clear title. New remanufactured tub/body- red, no rust. Completely rebuilt engine and running gear 4 plus years ago, almost zero miles since. Replaced Carter W/O 636-SA carburetor. Seats refinished to new condition, rear bench seat. 5 new 600×16 tires. New master cylinder, elec. wiper assy, spare tire bracket (not installed). New convertable top (tiger top by Best). Padded roll bar. Converted to 12 volts. New battery. New starter relay. New exhaust system- 4 plus years. Has PTO transmission with shifter. Clean unrusted frame. New floor mat. Has seat belt for driver. Have non attached power take off and drive shaft. (rare). Will consider offers. Over $5,000.00 in new parts.”
“selling my project. vehicle is complete with clear title. has good soft top, front end rebuilt, trans rebuilt, new clutch, new greasable shackles, f134 engine, roll cage, xj seats. body is clean and rust free. has frame damage but i do have another frame to replace it. please call 719-306-6349”
FRUENDLY AUTO SOURCE INC. 2177 WEST OUTER HWY 61 MOSCOW MILLS, MO. 63362
$100 DOCUMENTATION FEE ON ALL TRANSACTIONS. PICKUP OF VEHICLE CAN BE DONE MONDAY-FRIDAY 9am-5pm Central Time. and Saturday by Appointment before 1pm Central Time, Any questions you can reach us at 636-366-4500″
“i have 1942 willys jeep that i have owned for 14 yrs it has a fresh rebuilt chev 350 4 bolt main that only has about 5 miles on it. it has a ford t-18 trans jeep dana 20 transfer case and dana 30 front and dana 44 rear with brand new 4 wheel disk brakes . the frame was replaced with a m38 frame and was boxed in for strength witch increased wheel base by 6 inches and leaf springs where upgraded to wrangler springs. the tub was replaced with a old school bobcat racing fiberglass tub it has tilt steering and was set up for a bigger guy since i am 6foot 2 inch and 320lbs it has 8000lbs warn on front and its setup for reciver mount winch on the rear and a swing away rack on the rear that holds shovel and ax and 2 jerry cans and hi lift mount .it has a set of 5 33 12 50 15 wild cat ext that are about 90% tread left and i built on board air compressor that works sweet . and i do have 14 years of receipts too i am asking $4000 o.b.o or willing to do partial trade for motorcycle + cash thanks for looking”
I may not be the smartest cob in the corn patch, but one thing I do know, it shouldn’t require gloves to start a M-677 Forward Control Jeep. But, I quickly learned that Steve’s FC isn’t your ordinary vehicle. It really does require gloves, because it has a manual choke. And by manual, I mean he uses his gloved hand. Ordinarily, I like this bit of ingenuity, but after a couple rotations of the engine, fire exploded out the carb, making all four of us — me in the passenger seat, Steve in the driver’s seat, and Jeff and Mitch in the rear spots where there should have been a rear bench seat — nearly jump out of the vehicle. Fortunately, Steve had everything under control. I could tell this by the way he immediately pulled off the glove and beat out the fire with it. No, this wasn’t a ride in an FC; it was a ride more akin to Mr. Toad’s Excellent Adventure. 🙂
It all started with Mitch stopping by the house this afternoon to join me on a drive in Biscuit to Tacoma to drop by the FC Get Together. I neglected to mention to Mitch that this was Biscuit’s first drive on an interstate. I figured it wasn’t that important. Given the confidence he already felt in the jeep after it wouldn’t start right away (loose positive cable), I figured we’d test it on the interstate before I mentioned the ‘Hey, did you know this was the first time I’ve driven Biscuit on an Interstate?’ factoid. Fortunately, Biscuit behaved well throughout the journey.
Upon arriving at the FC Event, Mitch and I were warmly greeted by Blaine, Steve, Dave and others. Mitch already knew several people as he owns a couple FCs, more for property decorations than actual use I think as they remain future projects — a status held by many FCs it seems — but none-the-less beloved by him. But, whom am I to talk, as I have plenty of future projects of my own ….
Not long after arriving, Blaine and I enjoyed some fun trading war stories from the relationship and dating fronts. Between the two of us there were plenty of “what was I thinking” and “should it really be this hard”. Once we finally dissected the female pysche and concluded we had no chance against such formidable opponents, he suggested I take a look at a flat fender model jeep he made in his early teens from cereal boxes. It was pretty cool, so he has promised to send pics (don’t forget Blaine!).
Soon, everyone’s attention turned to the repair of a fuel line. Most of us gathered around the FC-150 like a bunch of lookie-loos. Some of us pressed against the front windows looking at Jeff install a fuel filter to provide cleaner fuel to the carb. You’d think with our goofy smiles we were kids all lined up , leaning on a glass counter trying to decide on the flavor of ice cream we wanted; it was a pretty funny site, not lost on the folks behind us snapping pictures. Of course, I was at the glass too, staring inside the cab when the repair was declared successful. Mission complete, now for the next challenge.
The next challenge didn’t take long and came in the form of Steve’s M-677 that sports a 289 Pontiac (?). You’d think I could tell you what the engine was because, due to the lack of an engine cover, I was staring right down at it, with the fan blade just a little ways away from sending me to the hospital. Fear not, for it was all part of the adventure I told myself.
As mentioned, there was fire, but Steve got that fixed and we were on our way. It turns out that a V8 powers a M-677 really well. As Jeff and Mitch held on in the back, Steve showed us that the old truck still had life in it, accelerating pretty quickly despite a flat spot in the carb. As Steve chauffered us, passersby were injuring their necks, craning them as they wondered what type of unearthly vehicle it was. As for the passengers, I don’t think any of us stopped laughing the entire time. For Mitch and I, it was only our second FC ride ever and, at least in my case, the best one! So, many thanks to Steve for taking the time to give us a ride.
Shortly after the ride was over, Mitch and I headed back for Biscuit’s 2nd time on the Interstate. We had fun and look forward to next year’s get-to-gether. Apparently, it will need to be at a new location, so if anyone has any ideas for next year, please send them to me.
Oh yeah, the Get Together lasts through Sunday, so you still have time to check it out if you are in the Seattle area.
Below: This was before we all lined up to ‘help’ fix the gas line problem.
And last, but not least, is Steve’s fire breathing M-677. The ride was quite literally a blast! Thanks Steve.