To Top

1965 CJ-5 Tuxedo Park Torrance, CA **SOLD**

• CATEGORIES: CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay

The seller provides a good description of the issues.  The underside could use some cleaning.

“1965 CJ5 – rare Tuxedo Park edition with even rarer bench seat, rear side seat cushions, and three speed on the column (works great – and fun!). Tires in great shape. Body very very good, and unmolested. Interior good. Registered in CA with current tags good til Spring 2012. Everywhere you drive it, people give you the thumbs up. Great summer fun.

I purchased this vehicle on Ebay a few months ago. It was listed by the seller as having 29,000 ORIGINAL miles. That might or might not be accurate. Much of the Jeep (it’s very much in original condition) would lead one to believe that mileage – but it cannot be confirmed, and it is not out of the question that the odometer may have been replaced. The seller (who sold it to me) was either unaware of, or failed to disclose, some issues with the Jeep. It required $2,000+ in repairs after it arrived in CA. I’ve had all the work completed by an expert and certified Jeep mechanic and it runs well now. This Jeep needs an owner with time to love it. I love it, but just don’t have the time. Since I purchased it: Complete brake job front and rear – drums, rotors, wheel cylinders. Carb rebuild. New alternator and voltage regulator. Differential service. Transmission and 4-wheel checked. All fluids replaced. All hoses checked (good). All lights now work – signal, brakes, front and rear lights. Compression is excellent: 125, 130, 125, 130.

NEEDS: Wipers not working (all hoses are in place). Gas gauge half-works (enough to keep you out of trouble). Temp gauge doesn’t seem to work. Heater not working. There’s some rust underneath, as this Jeep is a 1965. The floorpans at the front seats look liked they’ve been replaced. The fender wells are amazingly free of rust. The Jeep is its original color, but there has been some touch-up work done) The dashboard is wonderfully unmolested. There’s only a few holes carefully drilled (between the odometer and the left side of the dash). They appear to have been for a mounting bracket. The body is VERY straight and the Jeep looks great for a 1965. Most Jeeps of this era have been so modified, it’s nearly impossible to find one this original. It drives very straight and true. I’ve had other CJ’s. This one tracks very well – better than most.

I am selling it as is. With my purchase price, transporting it to CA, CA registration and $2100.00+ in repairs, I have a lot into this Jeep, but I don’t have the time to love it. The minimum price set on this Jeep is way below what I have into it. It is a very good deal, now.”

[fb_button]
 
To Top

Race / Sand Drag Flattie Oregon **SOLD**

• CATEGORIES: Racing • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  Was $5500. **SOLD**

(07/16/2010) My only question is, why park it facing a tree for pics?

“Built 355 Chev. 800 plus hp Sand Dragger – Hill Climber! 1956 Willys flat fender, body and frame. Narrowed and lengthened. All fiberglass body. 4-wheel drive capability, with automatic hubs. 1000 plus CFM, Holly double pumper, Holly fuel pump and fuel regulator with pressure gauge. Custom flowed heads with roller rockers and girdles. Roller lifters and diamond pistons. High volume oil pump with extra deep pan. Power glide, 2-speed trany, with 6500 ratchet stall converter. Trany lock-out micro switch and ratchet shifter. Aluminum radiator with switches for fan, trany fan, water pump, fuel pump, ignition. Locker rear end with new Strange axles. 20.00 – 15 comp. cut paddle tires and Mitchell triple laminated aluminum rims. Sturdy, weighted triangular wheely bar, Mallory tack with rpm limit and shift light. Raced in B-Comp Modified Class! Never used nitrus, Fuel used is C-12. Geared for 100 yds. in 4.5 seconds. This rig is testosterone on steroids!!!! Proven Record of consistency.”

[fb_button]
 
To Top

1962 CJ-3B New Holland, Pa **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE:  SOLD. Was listed at $2000.  It sold quickly.

This looks in good shape.

“I have owned this jeep for over 20 years, and never drove it. I bought the jeep with a blown engine, and had the transmission and transfer case totally rebuilt, and I also rebuilt the engine starting with the block. I had the block magna-fluxed and found out that one cylender had to be sleeved, so we had it done. New crank, cam shaft, piston and rings, also had the valves done and the head checked and rebuilt. The flywheel was also turned. I put the short block together, and that is where I stopped.

The front part of the frame was sandblasted, but the whole frame was cleaned and painted. The The body was also worked on, any rust was cut out and new metal welded in. There is no body putty on the body, I have photos of the work we did to the body at each step. I have all of the parts painted including all the headlight parts, radiator and shroud. The windshield frame is painted black, and I have the rubber seal for the windshield. Some of the windshield hinge parts have not been painted, but all the parts were sandblasted, and coated with a primer that you can sand to remove any imperfections. The photos show the dust that is on the jeep and seats, but the body and paint are like new. We welded shut all the holes for the soft top snaps and such, I did not plan on installing a roof. This was going to be a sunny day vehicle!

I bought the seats from a parts dealer and had them re-upholstered. The light color you see on the seats is dust, not mold. The seats will clean up perfect.

I have all of the engine parts, and diagrams that I drew so I could remember how to re-install all the wiring. The carb has not been re-built.

I thought about parting this jeep out, but it would be a shame if it were never completed (I was so close!).”

http://lancaster.craigslist.org/cto/2398818883.html

[fb_button]
 
To Top

1948 CJ-2A Verona, NY **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1400. Has a Kelly hardtop.

(04/27/2011) This looks pretty stock.  Though, there looks like there might have been some body work along the passenger side.

“1948 willys cj2a w plow runs good drives good 4×4 all works. Trade for fishing boat or make offer”

[fb_button]
 
To Top

1950 CJ-3A? Hot Sulpher Springs, Co $1000

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $1000.

(04/03/2011) No pics provided.  It sounds like a bit of a project.

“1949 willys 4 cyl,needs steering box repaired,all parts in back,was changing it from generator to alternator,needs finished,windshield has been moved forward? has new tires.has pto transfer case,complete besides original windshield frame and tailgate$1000 or offer,may trade.(970)485-2726 Rich”

http://denver.craigslist.org/cto/2399550971.html

[fb_button]
 
To Top

1947 CJ-2A Iron Mountain, WI **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: Was $500. **SOLD**

(05/15/2011) For $500 this might be a good price.  I love the “JEEP” marking.

“Own a piece of history!  This jeep would make a wonderful project for the guy or gal that likes to restore vehicles. The jeep comes with its original hard top. It has been a long time since anyone tried to start it, and the seats have since been removed. Everything else appears to be there.”

[fb_button]
 
To Top

The Flat Fender Club of Butler Drops by the Reunion

• CATEGORIES: Features • TAGS: This site contains affiliate links for which I may be compensated.

Sebastian wrote me yesterday, telling me he and some buddies made a special trip to visit the Willys Spring 2011 Reunion.

He writes, “Yesterday I went to the Midwest willys reunion in Mason OH. Altough we did not take our jeeps, some members of the Flat Fender Club of Butler went there to see some nice willys. It was a busy day, about 4 hours each way (from Pittsburgh). A very long day as you can imagine, totally worth it as shown in the pictures: http://flatfenderclubofbutler.wordpress.com/ (top post). I thought you may want to take a look.”

Here’s a couple of his images. See all of them at the link above.

[fb_button]
 
To Top

Another gun mockup

• CATEGORIES: Features This site contains affiliate links for which I may be compensated.

A reader and his son have been restoring a CJ-2A and have mocked up their own .30 cal gun.  They shared the below pic with me.  Thanks!

[fb_button]