Dave found and shared these photos of a Dualmatic hub box with an information sheet inside it.
1947 CJ-2A Middleton, WI $2500
I suspect this won’t last long.
https://www.facebook.com/marketplace/item/1093194144589092
“it starts drives and one brake will stop you at low speeds no title I can show on Mondays”
1947 CJ-2A Decorah, IA $20,000
Looks in good shape.
https://www.facebook.com/marketplace/item/990665391825549
“4 wheel drive, 4 cylinder original motor with a 3 speed manual transmission. Dualmatic 4 wheel drive hubs and an original PTO driven Ramsey winch. This is a 6 volt system with an Optima battery. The original odometer has 30367 miles and the new odometer has 1709 miles. We have the original odometer. There are many original parts, including an underdash coil starter key switch. The jeep runs, drives and stops. It has a good cooling system and oil pressure and does not drop out of second gear. Rust free, like new tires, a canvas top plus many other features.”
1957 FC-150 Lakewood, IL $22,500
Looks solid. Has a rear PTO gearbox.
https://www.facebook.com/marketplace/item/492596999192970
“1957 Jeep FC-150 4×4, nice older restoration, runs and drives. Not sure if odometer is actual. Cross posted,FCFS, won’t respond to low ball offers( message me for more info).located south of Shelbyville 62565”
4 FC-170s Fountain City, WI No Price
UPDATE: FB Post has some new pics.
(10/16/2021) Unclear if these are still for sale or what the prices are.
https://www.facebook.com/marketplace/item/282531883733061
SEVERAL JEEP FC170 TRUCKS FOR SALE. 3 WITH CURRENT REGISTRATION, TITLES AND PLATES IN MY NAME; PURPLE HAS HAD A LOT OF WORK DONE TO IT; NEEDS A BED, AND RUNS, DRIVEN TO WHERE IT SITS, CURRENTLY NEEDS A CLUTCH PART TO DRIVE; IT IS A 1957, THE FIRST YEAR OF PRODUCTION FOR THE FC170 JEEPS; RED ONE WILL RUN AND DRIVE, CURRENTLY AT A MECHANICS, 2 MILES FROM ME; IT IS A 1961; GREEN WITH PLOW, AND A STAKE BED ; THIS IS A 1960, RUNS, DRIVES AND PLOWS, IN GOOD SHAPE; WOULD LIKE TO SELL AS A GROUP, WITH THE GREEN PARTS VEHICLE SHOWN. ALL TRUCKS ARE MANUAL. TWO OF THESE HAVE PLOWS; THESE ARE THE BEST PLOW TRUCKS ON THE PLANET, IF YOU HAVEN’T HEARD.”
1964 CJ-6 Ruidoso, NM **SOLD**
UPDATE: **SOLD** Was $6500.
This modified CJ-6 has a rare Koenig hardtop with the “barn doors”.
“1964 Jeep CJ6a. Very rare. Konig removable hard top, oddfire V6, SM465 four speed manual with low, twin stick Dana 20 with low gear set, Dana 44s with 4.10 and lockers, 37” Goodyear MTRs with double headlock rims and matching spare. Very solid.”
1950 M-38 Goodyear, AZ $2600
This may be worth a look. The rust doesn’t look too bad.
https://www.facebook.com/marketplace/item/1311633826012965
“M38 flat fender. This Jeep has never been licensed or titled. It was bought surplus by a close friend and sand dragged. The Jeep is set up for a small block Chevy. Great candidate for full restoration or convert it into a crawler or? $2600 and you bring your own tires and wheels or $3000 with Goodyear mtr’s on new wheels. Very little rust. AZ Jeep. May take ? on partial trade. Very few dents and body damage. Includes axles, transmission, and transfer case. Vortec 4.3 with 4 barrel edelbrock a intake and 4l60 available for 1200.00”
1961 FC-150 LIncoln, MO $6750
It’s a project with mods.
https://www.facebook.com/marketplace/item/232547265645651
“61 FC, PROJECT. Approximately 9700.00 invested. Solid front axle, Camero rear end, set up for SB Chevy. 86 GMC, 4bolt, 700R trans are in the bed along with 80% PLUS of the parts to build stock looking or otherwise. Mounted on fancy wheels/tires. More pics if interested AND when l get it out of storage.”
1948 CJ-2A Colby, WI $5000
This was listed two years ago, but this is the first time I’ve seen it.
https://www.facebook.com/marketplace/item/482854838945849
“Willy’s Crate Package, Flat head Motor, Transmission, Transfer Case, Front and Rear Axles, Bell Housing, Fly Wheel and Clutch Assembly, Drive Shafts ,Tub, Front Clip, and 2 Radiators.
Rolling Chasis with Tansmission and Transfer Case, Extra Frame, Extra Grille, Extra Transfer Case and Transmission, Miscellaneous Parts Package,
Deal $5000 (Also have Title) All parts from jeeps we have acquired and disassembled. If you are looking to build a Jeep this is the package for you. Also have an F-Head Mor early 50’s jeep and another Rolling Chasis with F-Head Complete for Additional Money. Hard top for CJ2 or Cj3 with doors.”
1946 VEC? CJ-2A Taylorville, IL $7500
This is a project with some of the work completed. This pic below is pre-disassembly.
https://www.facebook.com/marketplace/item/670972780999751
“46 willys jeep.frame off rebuild.frame blasted and painted.motor rebuilt.40 over .trans t case gone threw. New brakes wc MC lines. New u joints clutch. Every blot touched replaced with stainless steel bolts.everything new or rebuilt.new seats and frames new gauges new windshield frame and glass.everything gose plus have old stuff still good can have too. Body needs side panel welded in have panels paint body put on and done have 11000.00 in my lose your gain moving and don’t have time to finish”
































