emailNeed to contact me and don't have my email? Click on email button.
About eWillys
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
Terry shared this CJ-5. Listed as a 1961 model, the body and fenders are from a later CJ-5 (early CJ-5s had JEEP stamped in all capital on the side and no side reflectors). A DJ-5 grille has been added to the front to fit the inline 6.
“Military. I was told the jeep came from California Airforce. Straight Six cylinder engine. The jeep needs some TLC with the windshield wipers are not wired. and some other things, but give me time I will get it put together but different cost. I need a truck.
Frame on the Jeep is like new.
Taxes paid up. Title in hand. CJ5
Also I have the top skeleton but not the canvas.
Sale for $5500. or trade for $7500. Looking for 1960s Ford truck.”
“1953 Austin Champ 4 wheel drive project right hand drive very rare made in England 5 forward and five reverse gears complete vehicle Motor is free engine sealed against water Car is in Milton wv 25541”
(11/24/2020) Advertised as a 1949, this has a 2A body based on the ignition holes in the dash, so it might be a 3A with a 2A body or a late 2A or some other combo.
“1949 willys project good frame transmission and transfer case has had new barrens and seals put in and a gm adapter to use a gm engine has a v6 buick engine in it also have the original redator for sale or trade”
“1960 Willys FC-150: Free to good home!
This is a low mileage FC-150 in need of an extensive restoration or good for parts. The engine does run and the truck does move. However, the throttle rod recently broke and the truck has no brakes.
It has the original plow frame and PTO. Truck has spent its life outdoors in New Jersey and was used to plow the owners driveway from 1961 until around 2010.
Truck is currently in my garage and whoever wants the truck will have to remove it. It is currently on wheel dollies that will need to be removed.”
UPDATE: Philippos has created some newer jeep models, this time building it based on a pic of a Ford GP that was modified into a crane. However, instead of a Ford GP, he made it a Bantam BRC-40. Here’s the original pic:
UPDATE: **SOLD** Was on eBay. This photo was floating one of the Facebook groups, but didn’t include the caption, which describes the passengers. This was originally published here Dec 23, 2014.
The question of the license plate came up on Facebook (as in, why does it have a license plate), while the question of “giant jeep” came up in a previous post on eWillys. The thing that’s been a head scratcher for me is that this jeep is carrying three grown men in the front, with space between the driver and the two passengers.
What is for certain is that in May 1941 Charles Payne (exec assistant to Bantam President Frank Fenn), was in Washington to promote Bantam’s efforts (see newspaper article at the bottom of this post).
So, thinking out loud, is it possible that the below verbiage is true, that Bantam made a “giant” or larger jeep to promote its effort to obtain a contract? It would explain why it has dealer plates (as it wasn’t owned by the military). Here’s a comparison with another face-front Bantam:
Photo on the left is a press photo with a standard Bantam BRC-40. The one on the right is the press photo with Congress men and Bantam Rep Charles Payne.
The angle of the jeep on the right going up the steps makes it appear a little larger, so that’s not helpful. One unusual aspect is that it seems to sit taller, with a greater distance between the tires and the front fenders; yet, the spring shacks still have more play in them than the photo on the left. However, all this could be the effect of being on the stairs with six people piled in it.
The license plate, unless enlarged, suggests that the jeep on the left is not giant, but rather a standard sized jeep. Therefore, my suspicion is that this isn’t a larger jeep. So, why the “giant jeep” comment was used by the reporter is still a mystery to me. Thoughts?
From the original eBay ad: “A Vintage1941 Original Photo depicting a Giant Jeep carrying politicians in Washington D.C. The vehicle was made by the makers of the U.S. Army’s newest midget to promote their new vehicle to the suits in Washington. The small four-wheel drive utility vehicles would become an icon of World War II. Original press stamp and caption with a MAY 25 1941 stamp date are on the verso.”
This photo was published in the May 26, 1941, issue of the Star Tribune out of Minneapolis, Minnesota:
This article from May 04, 1941, published in the Dayton Daily News (Ohio) provides additional information on Charles Payne’s visit, but doesn’t elaborate on the “Giant Jeep”, which may have been an Associate Press reporter creation:
This first column describes seven different uses for the term ‘jeep’. It appeared in the November 15, 1941, issue of the News Journal, out of Mansfield, Ohio:
A few days later, this blurb was part of a column called the Daily Knave, published November 18, 1941. It highlights some of the alternative uses of the term “jeep”.
This photo was floating around Facebook. It shows a Chicago Fire Department FC-170 dressed up as a clown carrier. Anyone know where the photo originated (the FB poster didn’t know). He did have a date of 12/5/1962.
Not sure how much value is here, but you don’t get to see an FJ chassis too often. I’m not sure if this is a FJ-6 or FJ-8.
“This is a 1965 Jeep fleet van chassis. Everything is there but the cab, wiring and the steering column (but the gear box is still there. The frame is in gorgeous shape, the motor is free but doesn’t run and the trans and front and rear ends are free. Its a automatic transmission and is 2wd. It was an old mail truck so it is set up for right handed steer. Great project machine. No title will write bill of sale”