Crawler Research Archives

To Top

1946 CJ-2A Crawler Huntley, NE $5100

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $5100

(04/16/2013) This has no shocks, just springs.

“Selling my Custom built 1946 Willys CJ2A. It has been stretched 2 feet. It sits on a 1976 Chevy 1/2 ton frame. It has power steering Power Disc Brakes, and it has the 350 engine and TH 350 Transmission. The transfer case is a 203 full time unit. The front axle is a Dana 44 and the rear is a GM 12 bolt with G80 Locker. It has custom bead lock wheels and 28″ TSL Mudder tires. The radiator is Aluminum, and sits between the rear frame rails. Engine has a new timing chain, Edelbrock Torker Intake and Edelbrock Carb. The Ignition is a GM HEI with Accel super coil. It has Headlights and a simple wiring system with flip switch and push button starter. I don’t have a title, but any chevy truck title and vin or Jeep title and vin would work, if you want to run it on the street. The intale is a K&N filter mounted high on the rollbar via snorkel, and the jeep will run in the water to the top of the windshield. Suspention is semi hybrid with no shocks, or sway bar for awesome articulation. no rust tub and very good military green paint. This Jeep will practically go anywhere and its comfortable to off road in because of the stretch and bucket seats. The rear seat is removable and seats 2. Please call 308-293-1708 for more information.”

http://denver.craigslist.org/cto/3986130579.html

1946-cj2a-huntley-ne

[fb_button]
 
To Top

1945 CJ-2A ‘Monster Jeep’ Kelso, Wa $18,500

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $18,500

“1945 Willys CJ-2A built for show and fun. Buick 231 High-Performance EST HP 320. Will wheel stand on command. Truck 3-speed manual trans; Warn overdrive; 1953 CJ-3A dana 44’s. Custom built over 8 years and has been inside and warm and dry all of its life since restore started in 1989. Full tilt front fiberglass front clip and original steel tub. 18X39 Mickey Thompsons on 15X14 Weld Super Singles; Rancho RS-9000; Boxed and reinforced frame; Clean inside and out; Tilt collude with wipers and light incorporated; Four point racing harnesses: Front Electric Brake line lock and rear driveshaft e-brake; Alpine paging alarm with interior detection; Street Legal Horseless Carriage licensed; Power Steering; Under seat drivers heater; SS braided brake lines and SS braided engine compartment Lines and way more than can be listed. This was completely pulled apart and all bolts polished SS cap head screws wherever possible. Will not disappoint.
Must see to appreciate the looks this gets and the fun it is to drive. I built what I thought was ultimate jeep for me, and now moving so it must go to new home. $18,500 Serious inquiries only please. Cash or pay-pal only.
360-430-0917…leave message if no answer, or email or text
Rich”

http://seattle.craigslist.org/skc/cto/3856786507.html

[fb_button]
 
To Top

1961 CJ-3B Madison, OH $2800

• CATEGORIES: CJ-3B • TAGS: This site contains affiliate links for which I may be compensated.

It’s a project.

“Here is a heavily modified old willys. Just about everything on it has been upgraded. Obviouslt the whole rear has been replaced with a tubular cage. I made it to offer great rollover strength but still mimic the classic body lines of the original willys, hence the curved door openings and the opening to fit the original willys tailgate.. The suspension uses Wider YJ leaf springs all around. reverse shackles up front and a 3/4 elliptical system in the rear, which allows for major flex. The old screw type steering was replaced with a heavy duty Saginaw box and beefed up custom linkage all over. All 4 wheels have been converted to disc brakes with stainless lines. the drivetrain however I kept stock, first, because of the nostalgia factor of keeping it willys, Second, because it has proven itself. Back when this was a normal jeep I could plow tons of snow and not slow it down at all or drive down the freeway at a fair speed. I have not started he engine in a few years but I’m sure it will crank over.
As I said, this is a project so it needs finished. Off the top of my head, it needs driveshafts put in, sheetmetal installed as the floor and sides (optional) brake lines run, pedals installed, amongst a few other things.
I am losing out big time asking what I am for it, but we all know you never get what you put into them. I just need to clear out some projects. You can call or text me at 4 four O-31 nine- O 47 O”

http://cleveland.craigslist.org/cto/3834698139.html

1961-cj3b-crawler-madison-oh

[fb_button]
 
To Top

1948 CJ-2A Crawler Havasu City, AZ $15,000 or trade for Bulldozer

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

Joe spotted this flat fender crawler.

“305 small block, T98 4 speed, dana 300 t-case, dana 60 high pinion rear with Detroit locker in rear, 44 high steer with Spartan rachet locker up, front 37″ pit bull rockers, on board air, fun toy & trail tested if interested give me a call 928-412-0021 some times cant hear phone so leave a # & i’ll call right back thanks for looking the new pit bull tires are not pictured & I still have 37″irocks that are in photos”

http://mohave.craigslist.org/cto/3806963759.html

flattie-crawler-havasucity-az

[fb_button]
 
To Top

CJ-5 Crawler Mars Hill, NC **SOLD**

• CATEGORIES: CJ5 • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $14,500.

At least there is room to carry spare tires.

“OFF ROAD TRUCK 4 sale or trade – $14500 (MARS HILL )

52″ tires 19.5×24 on 17×24 custom 6 shooter wheels
custom four link tube frame
fiberglass body
16×2.5 king coils SCS
quick change 4×4 transfercase with yolks
2.5 ton Rockwell axles
Full hydrolic steering
race seats and harnesses
radiator quad fans
fuel tank
MSD
600hp aluminum head 472 Chevy big block HP serpentine belt set up
fender wall headers
turbo 400 4L80 pump Allison clutches manual valvebody floor shifter 3500 stahl”

big-jeep-cj5-1

big-jeep-cj5-2

[fb_button]
 
To Top

1941? Flat Fender Crawler Arcata, CA **SOLD**

• CATEGORIES: CJ-2A, CJ-3A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $3500.

(03/14/2013) This may be a good price if the suspension was modified to crazily.

“1941 Willy’s crawler
Has lockers front rear 538 gears
84 s-10 4cly
Granny low 4 speed
Terra low transfer case gears twin stick dana 18 front dig
35″ boggers 30-20 ish tread
New 12000 winch
Runs good”

year-flattie-crawler-arcata-ca

[fb_button]
 
To Top

1950 Flat fender Rockcrawler Evansville, IN $6500

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

Lots of mods on this crawler.

“I have for sale or possible trade is a 1950 willys jeep rock crawler or muddier. YES I HAVE A TITLE. This thing is fully built with new 35in super swampers. Fronts are factory cut the rear are cut to clear mud faster. It has twin stick transfer. I just put 500 in new parts as in battery brake calipers, new nuts for spindles and new front brake pads. Plus all the new Gage’s and switches. This is fully caged all the way to frame. Geared very low low enough you can walk next to it. It has a 318 with auto trans there is no 1st gear in trans but you don’t need it at all with the gearing it has racing seats and 2sets of seat covers. Much much more. Asking 6500. That’s jeep look for a built buggy like this they’re going for 9000 and up. Call or txt 812/604/4845. The rear is air controlled as in height wise. It’s alot of fun.”

http://evansville.craigslist.org/cto/3694358829.html

flatfender-rockcrawler-evansville-in

[fb_button]
 
To Top

1946 CJ-2A Washington $7500

• CATEGORIES: CJ-2A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $7500.

(10/19/2012) This has a variety of updates.  Looks in good shape.

“Ive desided to see if i can sell my jeep. Ive had this thing forever and thought I would see what the market is willing to spend. This jeep needs very little to make it perfect,. If your a big person this jeep isnt for you. Im looking at a new project but I DO NOT HAVE TO SELL THIS DONT low ball , Im open for offers but lets face it guys, toys arent cheep any more . SERIOUS ONLY

I drive this jeep almost everyday, it runs like a top and wheels very good.

Heres the list

302 ford fuel injected
C4 auto re programed
all aluminum hi flow cooling syst.
KC daylighters
duel batterys
Warn winch
MDS ign sys
75 amp alternater
2 1/2 stainless / aluminum exhaust
T 18 twin stick transfercase
Warn Overdrive
Two sets of drive lines / 1350 series
norrowed 44’s front / rear / lockright / 4 awy disc brakes / 4.88 gears / rear diff is offset
Tilt steering / Quick release steering wheel / leather
Goodyear Wrangler mtr 36 s NEW on Bart Beadlocks
Art Carr shifter
power steering / all solid streeing rods with hym joint ends
6 point cage / powered coated
Rancho shocks
frame boxed and straped / rear springs moved to outside of frame rails / 2004 wrangler springs / 2 1/2 inch lift / lenghtened 13″ in front.
Frame rail bumpers
Dry weight 2900 lbs
Like new Best Top
Fresh paint job
Rear sway bar

I’m sure theres more to list!!”

http://seattle.craigslist.org/see/cto/3453738979.html

[fb_button]
 
To Top

1953 CJ-3A Novato, CA **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $5000.

(11/22/2012) Looks like a nice Crawler for the price.

“Back up for sale. I have a 1953 Willys CJ3A built for rockcrawling. I have built this for the last 7 yrs and now I need one for the family. It has way to many upgrades to list. A few of the basics are: its a Willys that has a Buick V6 225, TH350 trans, Dana20 w/ Teralow gears, Dana30 Front and Dana 44 rear axles both w/ ARB air locker 4:88 gears and chrome Moly shafts (The rear is full float/ the front has bigger U joints), Custom made MRW extreme 40 count real beadlocks w/ 37″ (almost new) radial iroks. Custom removeable cage, 4 linked rear suspension w/ Fox Air Shocks …….. I have built this for many years and I know it inside and out. It runs excellent even at 8000 ft elevation. I just went thru the Jeep and replaced the electric fuel pump and fixed the drivers caliper and bracket I broke last year. This is 100% ready for the trail this year. I have ran many trails such as the Rubicon Trail countless times and Fordyce Jeep Trail and this jeep performs well!!!!! I have put over $13,000 into this jeep in the last 7 years. I have almost every reciept for this build. I can remove the PowerTank, puematic system and winch for 1,000 off the price”

[fb_button]
 
To Top

1953 CJ-3A Placerville, CA **SOLD**

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5000.

Lots of upgrades on this rockcrawler.

“Back up for sale. I have a 1953 Willys CJ3A built for rockcrawling. I have built this for the last 7 yrs and now I need one for the family. It has way to many upgrades to list. A few of the basics are: its a Willys that has a Buick V6 225, TH350 trans, Dana20 w/ Teralow gears, Dana30 Front and Dana 44 rear axles both w/ ARB air locker 4:88 gears and chrome Moly shafts (The rear is full float/ the front has bigger U joints), Custom made MRW extreme 40 count real beadlocks w/ 37″ (almost new) radial iroks. Custom removeable cage, 4 linked rear suspension w/ Fox Air Shocks …….. I have built this for many years and I know it inside and out. It runs excellent even at 8000 ft elevation. I just went thru the Jeep and replaced the electric fuel pump and fixed the drivers caliper and bracket I broke last year. This is 100% ready for the trail this year. I have ran many trails such as the Rubicon Trail countless times and Fordyce Jeep Trail and this jeep performs well!!!!! I have put over $13,000 into this jeep in the last 7 years. I have almost every reciept for this build. I can remove the PowerTank, puematic system and winch for 1,000 off the price. I could still use those. It’s not street leagal as of now but eaisly could be with the addition of a few items. (I towed it to the trails) still has registration tags not a green tagged vehicle. For more info or many more pics just email. NO LOW BALLERS I dont need to sell this fast. $6500.00obo Thanks for looking.”

[fb_button]
 
To Top

1948 Rock Crawler Post Falls, ID **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD ** Was $4500

(09/22/2012) I have a rock crawler made out of a 1948 Willy’s tub and frame wrapped around a 350 Chevy out of an early 70’s Camaro or Corvette.

The specs:
350 Chevy with new motor mounts. Runs great its an 010 block really sought after lots of power with a Quadrajet carb, doesn’t cut out when on a steep incline.
-Custom headers with adjustable back pressure Supertrapp exhaust.
-37″ iroks, 85-90% tread
-Full PSC hydro steer with dual 8″ ram. Has entire PSC kit with reservoir. Only 4 trips since new.
-Dana 44 wagoneer axles, locked. Front axle just rebuilt. Disc brakes in front, recent disc conversion in rear with painted calipers. Only 4 trips since new.
-4 linked rear, 3 linked front. 16″ nitro shocks in rear.
-5 point Crow seats and harnesses
-Custom roll cage with tonneau cover
-4 speed tranny and NP 205 transfer case
-Cool thing with it being a 48 means it can be registered as a street rod and that makes it street legal.
-Have Idaho title in my name in hand.
-Only possible trade for 4×4 cummins.”

[fb_button]