Monthly Archives: September 2008

To Top

My Build — Small wins

• CATEGORIES: Biscuit This site contains affiliate links for which I may be compensated.

Small wins continue to push Gus forward.  This weekend I finished hooking up the transmission lines to the transmission cooler.  It’s a good think I pulled the lines apart and double checked them as one had a crack near the entry to the th350.  A quick stop at Andy’s Supply in Boise and the crack was taken out and the line repaired (Boy, do they give great service!).

My radiator hoses were a challenge.  I stopped in at my local Schucks and wandered back to their radiator hose area.  After seeing that none of their hoses would work, I finally selected two that I could cut, bridge and fit.  After cutting the hoses and bridging both radiator hoses (inlet and outlet) with a metal tube, I finally got a fit I can live with — however, it’s not a solution I’m thrilled about.

This is one of those situations I’m gonna let digest for a few days while I tackle some work projects and deal with replacing the waterpump on my 540i (which over the last month has seen the thermostat go bad [$100], the alternating belt break [$25], and the waterpump go [$150] — each requiring an online purchase and a week wait).

 
To Top

Reader’s Builds — Don Giovanini’s CJ-3B

• CATEGORIES: Builds, Features This site contains affiliate links for which I may be compensated.

Don’s got a beautiful CJ-3B that he’s clearly spent a great deal of time building.  Only a labor of love would produce details as unique as ‘a 4 barrel with a holley from a scout’.  If you don’t see this weekly driver around town, then he’s likely in the the hills of Colorado.

Some stats:

  • A 1954 CJ-3B that has the nomenclature plate for government service.
  • 231 buick bored .030 balanced
  • Eldebrock performer 4 barrel with a holley from a scout with a small venturi
  • Continue reading
 
To Top

1946 CJ-2A Albuquerque, NM $9500

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

Here’s a restored CJ-2A out of New Mexico.

“1946 Willys CJ2A, classic Jeep restored to original condition w/careful attention to detail, frame off restoration, every component of drive train rebuilt including the GO DEVIL flat head, L-134 engine, transfer case and transmission, new Spicer fron axle shafts, new brake lines, wheel cylinders and master cylinder, ignition converted to 12 volt solid state, Jeep comes w/open-sided, canvas, trail top and adjustable tow bar, $9500 or best offer.”

View the pics here

 
To Top

1960 DJ-3A Boulder City, NV **SOLD**

• CATEGORIES: DJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3900

I haven’t run across very many DJ-3As in running condition.  It looks like it would be very restorable.  See the text from the old Aug 1, 2008, craigslist ad below —

“1960 DJ3A Willys Jeep, two wheel drive, three on the tree, brand new best top, new clutch, new brake master cylinder, new ties, new coil, 134 inch flat heatergen, 95135 miles.”

 
To Top

1943 GPW Riddle, Or — $3500

• CATEGORIES: GPW (Ford MB) This site contains affiliate links for which I may be compensated.

UPDATE:  The price has been reduced to $3500

Obviously, there’s been a few updates, and it sounds like good ones, to this jeep.  Most interesting to me is the chain driven clutch.  I’m not sure what the seller means by that.

“1943 flatfender jeep produced by ford for the war.. Not all original so if thats what your looking for this isnt it. But if you want a good driving fun flatfender this is the rig. Its got a buick 225 v6 that was rebuilt 4,xxx miles ago, saginaw power steering, swapped in dana 30 front end with disk brakes and warn hubs, rancho springs and shocks, t-14 3 speed full synchro tansmission with a warn overdrive, full k line soft top in decent shape, chain driven clutch makes it easier to engage, Good body with minimal rust, larger gastank, electic fuel pump with shut off switch, spare tire carrier, ….. Contact me at cpap22@hotmail.com or call Chase at 541-817-2101”

http://eugene.craigslist.org/cto/841104224.html

 
To Top

1954 CJ-3B Sanger, CA **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $3500.

It’s listed at $3500, but James noted the seller will take $3000.  I can’t see any major issues from the pics.

“1954 willy’s jeep CJ3B; mostly original condition. F head engine, runs good. Price is $3500 OBO”

 

 
To Top

1940s MB Sunnyvale, Ca $3500

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

The top on this MB is unusual.  Is that a custom or aftermarket top?  I can’t say for sure this is an MB, it’s just my guess.

“I have a 1940’s Willy’s flat fender for sale. I’m asking 3500 or best offer. The jeep still runs but needs work as you can see in the pics. If you have any questions about the car or your interested in looking at it. You can reach me at 408-209-0511 my name is Branden. Or you can send an e-mail to shortys_weedies@yahoo.com Serious inquiries only. Thank you”

http://sfbay.craigslist.org/sby/cto/846291658.html

 
To Top

1951 CJ-3A Newcastle, CA **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $2200

“1951 Willys Flat Fender Jeep $2200 obo.  Has 302 Ford V8 running with 4 barrel carb. Needs tranny and transfer case replaced. Have original trans and transfer out of vehicle (bad case and cluster). “

 
To Top

Flat Fender Repro Body Nevada $1500 – $2000

• CATEGORIES: Body Parts This site contains affiliate links for which I may be compensated.

This is a brand new reproduction body that includes front clip and windshield frame.  Never installed.  If you already have a title, then this is a pretty sweet deal for only $1500.

“New, never installed, Jeep Flat Fender body. Includes tub, front fenders, grill/radiator support, radiator, hood, windshield frame. This was a project that never got started, built a CJ7 instead. It cost over $3000.00 new, I will take $2000.00 with title and VIN plate or $1500.00 without title and VIN plate. Prices are firm. Reply to this ad for more details, questions or to make an offer.”

 
To Top

Buick V6 Jeep Headers $100 — SOLD

• CATEGORIES: News This site contains affiliate links for which I may be compensated.

UPDATE:  Don has said he’ll purchase the headers. Apparently his son is building a ’52 flattie with a V6.  Ironically, Don is in Colorado and Colorado is where I purchased my newest set off of craigslist.

Wait, this is my ad …  I’m selling this set of headers because I found a set of chrome V6 headers in Colorado that John will be sending me tomorrow that ‘should’ fit.

“I’ve got a brand new set of jeep fenderwell headers for sale that I bought several months ago. These fit Buick V6s (225, 231, 3.8L). I bought these brand new for my jeep, but the way my engine is configured, they were angled in such a way that they don’t quite fit.

These should fit fine on a normal jeep application. They’d fit fine on my jeep if I had a shorter tranny, but the longer tranny pushed the engine farther forward and higher. You can see how my old headers fit but the new ones didn’t here at my ewillys website: http://www.ewillys.com/?p=765.

http://boise.craigslist.org/pts/843491732.html