UPDATE: Still Available
(12/17/09) The body might be good, but the paint sure looks rough.
“Spring over. Body very good. Flathead 4 cylinder. Runs. Needs carb work. 35″ tires with Mickey Thompson rims. Call 937-216-6042”
UPDATE: Still Available
(12/17/09) The body might be good, but the paint sure looks rough.
“Spring over. Body very good. Flathead 4 cylinder. Runs. Needs carb work. 35″ tires with Mickey Thompson rims. Call 937-216-6042”
UPDATE: **SOLD** Was $3900
(12/17/09) It looks good.
“Dana 44 in rear 3.73 with a locker,dana 30 in front with locker,304 AMC,T-15 trans,dana 20 transfar case.The jeep is in good shape.”
UPDATE: Price dropped. New pics added.
(11/29/09) What is that hose running from the passenger seat to the front of the engine? It’s still needs finishing of some kind.
“1951 Jeep Willys; 350 engine, Edelbrock aluminum intake, holly 750 carb, turbo 350 transmission, headers, runs good, don’t have time to finish. New tires, gauges, fuel pump, water pump, and rancho leaf springs. Questionhttp://www.ewillys.com/wp-admin/post.php?action=edit&post=21438s call Tim 355-0233 MAKE REASONABLE OFFER! MUST GO ASAP!!!!!!!!!!!! WILL TRADE FOR A TOYOTA (MID 80’S PREFERABLY)!!!!!!!!!!”
Here’s an interesting modification. A Willys modifie to simulate a Gas Attack. According to the details of the image, this image was taken at Geiger Field, Washington (which would be Spokane, Washington, if I’m not mistaken). “Officers and men are taught to be on the alert for a gas attack at any time. This jeep appears at unexpected places and sends out a charge of tear gas from the ingenious device attached to the muffler. Those in the vicinity, to protect themselves from the irritating gas, must be able to don their masks instantaneously.”
Here’s another painting by David Boyd. You can see his other willys painting here. David Boyd, Jr, is a high school art teacher and self-syndicated editorial cartoonist, but also describes himself as a painting addict. Here is a gallery of his non-jeep paintings hosted at dailypainters.com. You can email David @ rdboyd2@mac.com. Thanks once again David!
UPDATE: **SOLD** Was $5500.
This CJ-3B has some WOW factor to it. If it is as nice as this picture indicates, I’d say this is a good price. That sure looks like a Texaco insignia on the side. There’s likely a story that goes with this Jeep.
“For Sale: 1963 Jeep CJ3b with original drive train , has 7K original miles. Jeep runs very good and 4wd components work well. Jeep has the original Hoenig half top and doors. I have the original plow and frame, which are currently off the vehicle. Vehicle is registered in Connecticut. Serious inquiries only please”
UPDATE: **SOLD** Was $2500.
“Excellent Willys Jeep with Rear PTO Belt Drive thing for farm work! Just the Complete PTO setup is worth $2500 So I am tossing the rest in for free!!! As you can see it has been modified over the years. Looks like a willys truck nose, a Vauxall car cab, and a custom metal bed for cord wood. The only jeep stuff that looks original: PTO stuff, Frame, axels, engine, transmission. missing radiator. I don’t want to part it out, that way somebody can mod their jeep with these parts and convert theirs over to a AG Jeep. Engine looks complete with distributor, starter, and carb. I haven’t tried cleaning anything or try to turn anything over (The guy from Pawn Stars told me not to). ”
UPDATE: Was $250. **SOLD**
Here’s a very rare top. This will be a great find for someone. The seller does not want to ship.
“I will not ship. They don’t make these anymore. I have a white half cab soft top made by Kayline who went out of business years ago. I purchased this from mefford and hood out of tulare california a few years back and hade it stored ever since. This top only covers half a jeep. So you still actually have a bed to put stuff in when the top is on and zipped up. Windows look brand new and clear. Great for you hunters who use dogs. This way the cab stays warm, due to it being smaller and your smelly wet dogs are in the back, away from you and your cheetos. I have some of the hardware for the top, not sure what all is needed. There is a small box with the instructions and door handles, screws, and other small brackets. Not too sure on all the rods, the doors are correct, the skins just slide over the metal frame and snap into place. The bow and other rods not 100% sure on. Looks to be too many pieces. Any good mechanic / fabricator can figure it out and make a couple pieces if need be. Jeep not included. have more pics of top and parts/bows. Some staining on the top, should be able to clean up with a little elbow grease”
UPDATE: **SOLD** Was $2200.
It runs and drives. That’s the good. Unfortunately, the seller won’t find a ‘Ford’ logo on the back because the body has been modified with the back of a CJ-5 body. I should have started tracking these, because I’ve seen around 10 of these modified flattie/cj-5 bodies.
“I purchased this jeep last year to restore. I’ve found that I don’t have the time and it has just sat. It runs and I drove it around the block. The starter was rebuilt by the past owner but I think the starter bendix is sticking?? This is a project at this point. It needs alot of TLC but is drivable. I have the title in hand. If you have any questions please email or call. I will be as helpful to you as I can but I don’t know that much about it. It does have the Ford plackard on the dash but no ford stamp on the rear of the tub? You ask the questions and I will look and try to answer.”
UPDATE: **SOLD** Was $1500. Given it runs and drives, it sounds like a deal.
I can’t tell whether this is a CJ-3A or M-38. I *think* it’s a CJ-3A with a M-38 Gauge Dash.
“$1500 Firm no trades, no checks. 1952 Willy’s. I am selling it for a friend. It has a ford 260 v8 in it. Runs great and drives… Collector plates.”