Monthly Archives: January 2014

To Top

1949 CJ-2A Newton Falls, OH **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4550.

Needs some brake work.

“Jeep is located in newton falls ohio 44444 look it up before you call
Probably 30 minutes from Akron
This jeep has a title

1949 Willys Jeep CJ2
Jeep is road worthy I use to drive it
all steel body that is in decent shape
-headlights taillights and turn signals all work
-Manual trans 3speed with high and low
-v6 engine
33 inch tires
4×4 with high and low gears
Runs and drives
Very fun toy
4×4 works
manual front hubs
This jeeps creeps through everything
Needs brake work (possible line broke no fluid in the master cylinder)
Newer soft top
$4500
No trades”

1949-cj2a-lakemilton-oh2 1949-cj2a-lakemilton-oh3

 
To Top

1946 CJ-2A El Dorado, NV **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $9400.

Lots of changes to this rig.

1946-cj2a-stretched-eldorado-nv1 1946-cj2a-stretched-eldorado-nv2 1946-cj2a-stretched-eldorado-nv3

“This 1946 Willys CJ2A has been highly modified, and is street leagle, and registered . It has had a new tub fabricated and stretched 28 inches as well as the frame being stretched. It has 3/4 ton Chevy truck axles geared to 5:13 ratio, a Sm 465 transmission with hydrolic clutch and a new 30 Pound clutch plate, and new clutch. It has 2 transfer cases, a Dana 203 in front of a Dana 205, utilizing a North West Fab Fully clockable adapter housing and a triple levered cable shifter. A recently installed 4.3 Gm fuel injected engine, and power steering, power brakes, tilt steering column, air compressor, and disc brakes.

Continue reading

 
To Top

1947 CJ-2A Jonesville, MS $4000

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

It’s missing steps at the very least.

“This is a 1947 Willys Jeep CJ2A. The Jeep runs and drives great. I did a frame up restoration completed about 5 years ago. The jeep is 90% original, the only changes were a 12 volt alternator, 2 1/2″ superlift left springs, 1 1/4″ lift shackles, a welded rear end out of a 1945 MB and a one piece windshield. I still have the original shackles and the original rear end. It has the original flathead four cylinder rebuilt, original T90 three speed transmission and transfer case. New break master cylinder last year. I have the original tailgate but is has not yet been restored(it’s it decent shape). These jeeps fully restored go for over $10,000. Someone with some mechanical know how and body work skills could have this back to that with not much money and a little TLC. The jeep currently has a broken rear axle but the original axle will go with the jeep. The original axle has not been restored. I was going to make this into an off roader but decided it was too rare to chop up. The tires and wheels shown are not going with the jeep. I’m asking $4,000.00 O.B.O. Text or call 517 three 98 240 six”

http://jxn.craigslist.org/cto/4302352984.html

1947-cj2a-jonesville-ms2

1947-cj2a-jonesville-ms3

1947-cj2a-jackson-ms

 
To Top

1946 CJ-2A Sacramento, CA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5000

Runs and drives.

“Jeep over all good runner gauges work, body straight, pto & winch work, engine & tranny had been gone thru , running gear is in good shape, brakes work fine, inside clean.”

1946-cj2a-sacramento-ca-91 1946-cj2a-sacramento-ca-92

 
To Top

1948 CJ-2A Champaign Urbana, IL **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was No Price

Looks complete. Unclear if it runs.

“Just wantin to trade this off,
Like the jeep, but tempts me to do something I shouldn’t
Just assume trade it off.
Make offers.
If not, lost my butt already, I’ll do a frame out.”

1948-cj2a-chambana1 1948-cj2a-chambana2 1948-cj2a-chambana3 1948-cj2a-chambana4

 
To Top

1952 CJ-3A Maili, HI **SOLD**

• CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $7500

The rollbar looks like it has been installed backwards.

“Well cared for 1952 Willys Jeep, $7,500.
4 cylinder, 4 wheel drive
New fuel system
Less than 150 miles on the tires
Includes extra parts, both new and used parts.”

1952-cj3a-oahu0 1952-cj3a-oahu1 1952-cj3a-oahu2

 
To Top

1950 CJ-V35U Pike Road, AL $8000

• CATEGORIES: CJ-3A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: Still Available

(11/03/2013) Sean saw this one in person. I agree that there isn’t much CJ-V35U left. He wrote, “It is in good shape overall except the fuel tank had rusted out. Not much makes it a v35/u in terms of specialized parts. The seller is selling it for the widow of friend and her kids have ridiculous expectations on the price. So right now he cant talk her down below 8k.”

“PARTLY RESTORED V-35/U WILLYS JEEP SERIAL #10966
CALL JAMES @ 3 3 FOUR – 2 7 ONE – FOUR 7 5 6”

http://montgomery.craigslist.org/cto/4298711513.html

year-cjv35u-pikeroad-al1

year-cjv35u-pikeroad-al2

year-cjv35u-pikeroad-al3

year-cjv35u-pikeroad-al4

 
To Top

1947 CJ-2A Crawler Yakima, WA **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $10,000

Lots of crawler updates.

“This is a completely custom flatty its got 60s front and rear. 488 gears locked rear. Ford 351 Windsor t18 trans 205 tcase. Linked rear. Name is Craig text for info.”

 

1947-cj2a-crawler-yakima-wa

 
To Top

Roll Cage Phoenix, AZ **Status Unknown**

• CATEGORIES: Roll Cage This site contains affiliate links for which I may be compensated.

UPDATE: **Status Unknown** Was $300.

If you are looking for a solid cage, this price is cheaper than making one.

“This was taken out of a 1947 Jeep Willy that was a rock crawler project. That project never happened, so I’m selling the custom roll cage that was made for it. I believe it will fit many other Jeeps and years and can be easily modified for a Samurai or something similar. It is made from 2″ tubular metal pipe and is structurally in great shape. Could use a good cleaning and paint though. Here are some measurements that may help you determine if it is what you want.

Front to Back of cage measured from the base – 71″
Side to Side measured from front part of base – 50″
Side to Side measured from rear part of base – 54″
Height measured from middle of roll cage – 47″
Windshield opening Width – 21.5″
Windshield opening Height – 44.5″
Cab opening Width – 3′
Cab opening Height – 39″
Side plates on the back base Width – 10″
Side plates on the back base Length – 33”

flattie-race-cage-phoenix-az0 flattie-race-cage-phoenix-az1 flattie-race-cage-phoenix-az2

 
To Top

1953 M-38A1 Oceanside, CA $5000

• CATEGORIES: M-38A1 • TAGS: This site contains affiliate links for which I may be compensated.

This might be worth a look.

“I have a 1953 willys M38A1 up for sale for $5000. It has a freshly rebuild motor and is mostly stock. It does need a little tlc, it drives now but will need a little work before it is road ready. ”

http://sandiego.craigslist.org/nsd/cto/4303305940.html

1953-m38a1-oceanside-ca