CJ-2A Research Archives

CJ-2A, cj2a

To Top

2 ’46 CJ-2As, a ’61 CJ-5 and Parts Keeseville, Ny eBay

• CATEGORIES: CJ-2A, CJ5 This site contains affiliate links for which I may be compensated.

Here’s a bunch of parts and parts jeeps.

“For sale 2 jeeps for the price of one-1st a 1946 Jeep CJ2-A complete ready to restore-great frame body is solid-needs rear floors-all orginal gauges-12 volt system-orginal windshield with perfect glass-hood-fenders-3 front grills-2 extra radiators-2-steering wheels-tailgate-1961 Jeep CJ-5 with all running gears-good frame with a 2-A flat head motor-engine was running 3 years ago when last used-needs tub has a warn spicer rear PTO. 2 complete motors. too many parts to list have an extra front & rear end. Also have for sale rebuilt tranny&transfer case with emergeny brakes and drum ready to go in storage since rebuilt-for a CJ-3A will sell for 600.00. I have been collecting for about 20 years with the intention of putting them on the road,but moving south and do not want to move these. The steering wheels are complete with column.The motor for the 1946 is in excellent running condition,purcased from orginal owner.Have over 5,000.00 in parts alone.  Buyer is responsible for pick up and removal of jeeps and parts. Payment is due in full 7 days after the sale is complete.  I reserve the right to end this sale at any time.  These items are being sold as is with no warranty.     I’am going to revise this item due to the surge of questions regarding the parts what I have for sale is 2-gas tanks $185.00 each-1-extra grill $100.00-2-radiators good condition 200.00 each -rebuilt T-90 transmission new 2nd gear &gaskets 500.00 -T-18 Transfer case rebuilt new brakes,seals,bushings rebuilt in 1995 never used has been in storage $500.00 -2-extra intake manifolds $300.00 each- 2-extra carter carbs $250.00 each. Front & rear ends complete gears-brakes-drums-lift suspension-front tirerods $300.00 each.if you want to make an offer on any part send an e-mail or buy the complete package for 2,000.00.”

View all the pics on eBay

1946_cj2a_keeseville

1946_cj2a_keeseville2

1961_cj5_keeseville

1961_cj5_keeseville_parts

[fb_button]
 
To Top

1947 CJ-2A Bend, OR **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $1500

This has some interesting parts, including a top loader 4 speed, 4.3 liter engine, extended leaf springs, dana 30 front end.

“47 willy’s project no time for 4.3l engine dana 30 front axle with lockright 41 rear axle locked new windshield holbrook long leaf springs dana 20 transfercase and model 18 transfercase and a toploader fourspeed or a t18 transmission”

1947_cj2a_bend

[fb_button]
 
To Top

1948 CJ-2A Salado, TX **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4500.

Interesting hubcaps.

“1948 Jeep Willys – Runs Great! Price $4500 OBO. For more information,”

1948_cj2a_salado

[fb_button]
 
To Top

1946 CJ-2A Hayward, CA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

1946_cj2a_haywardUPDATE: **SOLD** Was $3000.

(04/09/09) Honestly, I’m not sure if that’s a paint job or paint peeling.  The seller says this is a ’46, but the grille and body look more like they are an MB/GPW.  so, the actual year of this vehicle might be earlier.

“1946 JEEP WILLYS RUNS AND DRIVES GREAT CALL RYAN ”

 

[fb_button]
 
To Top

1946 CJ-2A Fruitland, Id **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay.

Here’s a solid looking CJ-2A with a CJ-3A windshield.  Fruitland is only about 20 miles north from me.

“1946 Willy’s Jeep, 4 cylinder 4 wheel drive. It has a three speed transmission with a two speed Warren overdrive. The springs have been resprung. It has a full soft top in good shape, and it also comes with a bra top. Brand new all season radial tires.  After market heater that really warms.  New clutch, Runs great.  Body in good shape, could use a paint job.  Weak points:  Windshield wipers needs one motor, bubble in hood (see photo), needs choke cable.”

1946_cj2a_fruitland1

1946_cj2a_fruitland21946_cj2a_fruitland3

1946_cj2a_fruitland4

[fb_button]
 
To Top

1946 VEC CJ-2A Palos Verdes, Ca **SOLD**

• CATEGORIES: CJ-2A • TAGS: , , This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $10,000.

(11/04/2010)

“First of all please note my stellar feedback so you can bid with confidence. I expect the buyer to be the same. Out of my collection is this very original 1946 CJ-2A Willys with matching civilian 1946 TC-3B Bantam trailer. This Willys is a frame off restoration. It is refinished in the original and correct color of Harvest Green. It has the correct original running gear: 134-L Go Devil engine, T-90 trans and Dana 18 transfer case. This Willys would do well in any show and is turn key ready. Best of all, you can drive it anywhere.  The reserve is set MUCH less than comparable vehicles on the market and this INCLUDES the Bantam trailer. Odometer shows 47,290. I don’t know if this is actual or not. The following are all new or professionally rebuilt. Look at the pic’s…”

[fb_button]
 
To Top

1948 CJ-2A Lexington, Sc **sold for $4500**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

The auction on this just completed on this very stock jeep.  This was a one-family jeep that looks very solid and appears fairly rust free, though the floor boards deserve some inspection based on the floorboard pic.   This didn’t last long (less that 24 hours) before someone offered the buy-it-now price of $4500.  I’m a little surprised it went so quickly for that much. It does have the original bill of sale (last pic) which is cool.

“I am selling my 1948 CJ2A.  I am located in Lexington, SC.  This Jeep was bought brand new by my Grandfather in March of 1948.  I have the original bill of sale as well as a clear title.  My grandfather passed away in 1987 and the Jeep sat in a barn until 2007.  The Jeep is now in good running order, but I do not have the dedication or the funds to take it to the next level of restoration.”

You can view the Ad here

1948_cj2a_lexington8

1948_cj2a_lexington1

1948_cj2a_lexington2

1948_cj2a_lexington3

1948_cj2a_lexington4

1948_cj2a_lexington7

1948_cj2a_lexington5

1948_cj2a_lexington9

[fb_button]
 
To Top

1947 CJ-2A Douglas, WY **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was$3800.

(02/21/2010) “Aluminum 1/2 cab, heater 12v alt new gas gauge, new sending unit, 12 v ele fuel pump new solex carb have orig, new plugs, new cap & rotor,point,cond. new elec wiper motor. new temp gauge mech. new spare tire mount, good title, orig steel body New lube in all gear boxs,new battery”

[fb_button]
 
To Top

1946 CJ-2A Granbury, Tx **SOLD**

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD** Was $1650.

(10/16/09) It runs, but has a clutch problem.

Complete. Has all components. Great project for the jeep enthusiast. Engine runs like a clock. Smooth and quiet. Seems to have a clutch problem. Call (do not email) Jerry for details.”

 

1946_cj2a_granbury

[fb_button]
 
To Top

Builds: Chad’s Ford Model A Roadster PU Willys

• CATEGORIES: Builds, CJ-2A, CJ-3A, Features, Unusual, Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

Here’s a wonderful build, an experiment by a reader named Chad.  He wanted to know what a Ford Model A Roadster would look like if Willys built it. So, naturally, he built one himself!

He writes, “Did all of it myself except the upholstery, in my home garage. It’s got a flathead V8 for power and took between 6 and 8 years start to finish. The dDrivetrain is flathead V8 adapted to a C-4 automatic adapted to Dana 18. Front axle is Dana 27 w/Corvette discs….rear is Dana 44 with one piece axles and Lock-rite geared 4.27.  I thought maybe it would be a four year job, but stuff happens  and there was a whole lot of headscratching to make things look ‘somewhat factory’. I used as many factory parts as I could but not necessarily the way they were used ‘by the factory’…..(those are Jeepster tailights, but they aren’t mounted that way on a Jeepster, just as an example).”

Great work and thanks for sharing!

frankie

frankierear

interior

engine

[fb_button]