” This is an incredible find! 1948 Jeep Willy “hard-shell” ambulance. Includes siren and light. This is the perfect restoration project for the Willy/Jeep collector or the person who must have that incredibly “head-turning” must-have collector vehicle.”
CJ-2A Research Archives
1946 CJ-2A Lomas, Nm $1950
This might be a very good deal.
“This is an unrestored, unmolested original Willys Jeep. It has the original 4-cylinder engine and 6 volt running gear. I bought this Jeep last year, not running, and I put a starter, battery, new cables and a new ignition switch in it. Now it starts and runs and I’m able to drive it up and down the street. I’d love to keep it and make a nice mountain goat out of it, but I just have too many projects and can’t devote the time to it. My loss is your gain! It comes with a gas can with mounting bracket, a tow bar for 1 7/8 ball, trailer hitch and four spare wheels (I was told they are the original wheels). The NM title is clear and in my name.”
1946 CJ-2A Gainesville, Ga **SOLD**
This has an unusual top.
“63,000 original miles, four cylinder Flat Head engine, 3 speed transmission with top end of 52 mph. Converted to 12 volts. New brakes & brake hoses, carburetor rebuilt, replaced generator with alternator, electronic ignition, new hoses, electric windshield wipers, new upholstery, six point bolt-on roll cage with rear lights & bikini top, Barden winch, tow bar. 16″ chrome rims with 235/85 X 16 Dayton Timberline tires,”
1947 CJ-2A Redding, CA **SOLD**
This is a beautiful build, but the price will scare a lot of buyers away. A tilt front flattie is certainly rare enough to warrant posting.
“1947 CJ2A Willys: Engine – 302 V8, New Edelbrock Carb, Edelbrock intake manifold, New Starter, water pump, one wire Alt, motor mounts, remote oil filter, All new gaskets, oil pan valve cover, front, rear main seals, new flex fan, 3 core radiator, rad hose’s. Transmission – NP435 Four speed with deep granny 6:98 tol, new bearings, seals, sincros and mainshaft, rebuilt with Advance Adapters kit to marry to Dana 18, also rebuilt with new seals, bearings and gaskets. Front & Rear ends – Model 23 front-41 rear, rebuilt with new seals, bearings, gaskets 4 wheel full size disc brakes, new rotors, calipers, pads, hardware, front axle equipped with ATV manual hubs.”
Various Early Jeeps Arvada, Co **SOLD**
UPDATE: **SOLD**All the stuff must go (probably in violation of a county ordinance or something)
- 1945 Willys MB jeep (NAVY?) – Flat head four 134 cid. engine, T-90 tranny, it has a tailgate cut in but the panel is still there.
- 42 Ford GTB
- 42 Willys MB
- 42 Willys script body tub
- 42 Ford script GPW
- 47 CJ2A
- 2) 48 Willys jeep pickups
- 52 Willys M-38
- 54 Willys M-170
- 60 Willys utility wagon
- 3.5) 61AMC mighty mites
- 62 Willys FC-150
- 2) 71 jeepsters
- trailers and miscellanous jeep parts.”
1946/1966 flattie Berlin Heights, Oh $5600
The builder put a good collection of parts together for this flattie.
“1966 custom Willys jeep, with 1946 body./body off restored / 350 chevy v8 motor with avenger holly carb/ munci 465 trans/ dana300 transfer case/ dana 44 rear end/ dana 30 with disc brakes front end/ 33″ like new thornbird tires/ power steering/ only thing it needs is for the brakes to be pressure bled. $5600 call Mike at 440-225-2421”
1946 Lefty CJ-2A Portage, Wi **SOLD**
“I bought this about 15 years ago and it has been a blast. I have a large farm and we used it to cruise around here and taught my kids how to drive on it. It runs excellant and has the original Hurricane 4 cyl. Red Devil engine with a 3 spd. Trans. The tires are great, but as you can see they are not original equip. Recently installed entire brake system. We would use this to ride around at hunting season and the occassional trip down to the local watering hole. It has been great to us and has always started and never left us stranded. It truly is a great piece of history that would make an excellant canidate for restoration or use as is. We have had our fun with it but just don’t use it much anymore so it is time for it to go to a new owner.”
1948 CJ-2A Denton, TX **SOLD**
“great jeep mechanically……cosmeticly challanged……… runs and drives and stops! no smoke or grinds etc. was fully rebuilt as a hunting rig about 8000 miles ago ….springs,engine, tranny ,transfer,etc…..and thats about 15 years. kept outside. pretty solid body,orig seats speedo and gauges work .2 new tires original type wheels. wrong steering wheel. brand new starter and carb work done. the old jeep is about farm ready today”
1946 CJ-2A VEC San Jose, Ca $4000
UPDATE: During the math portion of my analysis below, I forgot the serial numbers started at 10,000, so there was more like 28,000 column shift CJ-2As. Thanks for spotting this Lee!
Here’s a VEC with a serial number of 15777. According to the CJ-2A page, the number of column shifting CJ-2As was more like 28,000 jeeps 38,000 rather than 15,000 mentioned by the seller.
“Serial number 15777, CJ2A with 3-on the tree. Very rare as only about 15,000 produced with the gear shifter on the column. Great for rock crawling as you can keep both hands on the steering wheel while shifting gears. Runs good, has good tires. I use it in the mountains near Lake Tahoe during the summer months and store it at my house in San Jose during the winter months. I also used it to pull floats in parades, but no longer retain current DNV registration. I put new Ford/Chevy large brakes on the front axle, replaced brake shoes on the rear. I also replaced the oil bath air filter and old filter systems. I have all original older parts plus some spare stuff. Email me for more info and pictures. Mike”
1948 CJ-2A Bakersfield, Ca **SOLD**
Here’s trail ready jeep with a very low crawl ratio (sm420 + dana 300/teralow +4.56 gears).
“1948 WILLYS CJ2A.383 STROKER,SM420/7TO1 1ST GEAR.CENTERFORCE CLUTCH.POWER STEERING/BRAKES, TWIN STICK DANA 300 WITH TERALOW 4TO1 KIT.TOM WOODS FRONT AND REAR DRIVELINES.DANA 44 FRONT,CURRIE ALLOY AXLES,4.56 GEARS,DANA20 REAR,CURRIE ALLOY ONE PEICE REAR AXLES,4.56 YUKON GEARS.FRONT AND REAR ARB AIR LOCKERS.REVERSED SHACKLE FRONT SPRINGS.7IN. ….. 5500.00 OR TRADE FOR 67TO75 GMC/CHEVY TRUCK OR BLAZER-66TO 77 BRONCO/FORD TRUCK.NO”






