emailNeed to contact me and don't have my email? Click on email button.
Welcome to eWillys.com, a website for vintage jeep enthusiasts. I update this website nearly every day with jeep deals, jeep history, interesting reader projects, jeep related info, and more.
These quick searches can help you find things on eBay. People list in the wrong categories all the time, so don't be surprised to see brochures in the parts area for example. This section used to be split into jeeps, parts and other categories, but recent changes to eBay will require this information to be recoded.
The links to posts below show jeeps grouped by models, condition, and other ways. Some of these jeeps are for sale and others have been sold. If you are unsure whether a vehicle is still for sale or not, email me at d [at] ewillys.com for more info.
There are plenty of interesting, unusual, historic and surprising stories related to Jeeps and their owners. In addition, some of these features have nothing to do with jeeps. This link will display all featured stories starting from the latest.
Looking for parts and not sure where to go? There are a variety of large and small new and used parts sellers both online and offline.
Importantly, the allure of buying a project jeep can be romantic. The reality of restoring a jeep can be quite different, expensive and overwhelming without the right tools and resources. So, tread carefully when purchasing a "project". If you have any concerns about buying a vintage jeep, or run across a scam, feel free to contact me for help, comments or concerns .
UPDATE: **SOLD** Was $2500
“1949 Flat fender, 33015 actual miles, all original, runs, some rust but VERY restorable. $2500.00”
UPDATE: **SOLD** Was $9800
(07/15/2009) There’s been some interesting choices on the customization of this CJ-3A. Note the gas filler location for example on the back.
“1950 Willys CJ3A, ground up build, all steel, 327, 4sp, 205 transfer case, toyota 4:11 rearends, PS, PB, front disc, heater, 8 point cage, custom aluminum diamond plate, new Best Top, entire tub Rhino lined, 42 gallon fuel cell, reversable rear seat, all seat belts, 8000 lb winch, hitch and trailer plug, cooler carrier for hitch, Edelbrock, B&M, 35″ Kumo’s, Autometer, too much more to remember, only 3500 miles since complete build!! This Jeep runs down the road like a brand new one, just way cooler!! It is fantasic off the road too.”
This seller also is selling the CJ-3B project below.
“for sale is a bunch of jeep parts. I have flat head motors, CJ-2A frame, rear eads, rear PTO, body parts for CJ-2A, 3A, plus a few for a CJ-5, gauges, trannies, transfere cases, seat frames, roll bars, air cleaners, tail gates, small parts, all kinds of stuff,,, would love to sell it as a package. The pictures do not include all the parts.. I am also selling a CJ-3A, no title “project jeep”. Also for sale is a 1955 CJ-3B high hood project, half way through the restoration, have well over $5000 invested, will sell for $4000. In the near future, I will be selling a couple of fully restored CJ-5’s. Thanks”
http://boise.craigslist.org/pts/2334028044.html
This might be a good price.
“Selling Two Jeeps. one is a 1950 Willy’s jeep class AJ w/ original engine in fair condition. Have the title for it. The other one is a 1943 ford jeep with a V6 engine. This one is a salvage title with paper work but no title. we are asking $2500.00 OBO for both jeeps. If interested please call Frank @ 916-296-9218”
http://sacramento.craigslist.org/cto/2333401144.html
UPDATE: **SOLD** Was $600.
This is indeed a project.
“fantastic restoration project, remanufactured f-head 4 cyl. engine, excellent running gear, have title.”
UPDATE: Was $500. **Sold**
There might be some value here.
“1951 Willys Jeep. No motor. Has a Chevy trans adapter, hanging pedals, and upgraded steering box. $500.00”
UPDATE: Still Available. Was listed at $2000.
(12/13/2010) “1952 willys jeep with a three speed trans. This rig is great for offroading or a collectors item. this little thing will go anywhere you wanna go. it is really fun to drive. comes with a very nice black soft top with doors and everything, also has a tow bar on the front. i just changed the oil and put a new head gasket on it, also replaced the radiator with a new one. 2000obo”
http://eastoregon.craigslist.org/cto/2333806687.html
UPDATE: Price dropped to $3000
(04/11/2011) The cut of the door really changes the look of this rig. The running gear sounds good.The front springs appear reversed and put over the axle.
“1950 Willys CJ3A. 289 Ford. Accell ignition, Edlebrock performer intake, Holly 600, fenderwell headers runs good. Ford 3sp. Dana 20 transfercase. Ford 9inch rearend, Dana 44 front end. 4.10 Gears. New 33×12.50 mud tires. She start, runs drives but does need some work. $3,500 but all offers considered. Would trade for the right 14 foot or larger aluminum boat. Might consider taking rifle for part trade. 509-Seven8seven-08nine44”
http://yakima.craigslist.org/cto/2333415671.html
UPDATE: Still Available
(06/29/2010) The seller suggest the engine needs rebuilding.
“This Jeep was stored in a barn for 30 years and has a great body plus a Pa. title. 11″ Bendix brakes and a Hurricane F-4 engine are from a CJ5. I’ve never tried to start the engine because I intended to adapt a GM V-6 during the restoration. Now, I need the garage space and don’t have time to work on the 3A, so it needs a new home. Asking $2500 412-335-0972”
http://pittsburgh.craigslist.org/cto/2328621662.html
The hood and grille looks good from far away.
“52 willys frame and engine. Lots of extra parts. 800 obo or possible trade for 80s toyota parts. You can contact me any time at 6203717”
http://nmi.craigslist.org/cto/2326757138.html
**SOLD** Was $500
“Basically all original, but not running. No title.
In my opinion, the frame, transmission, transfer case and running gear are usable for someone wanting a project. Original 4-cyl motor turns over by hand. It was running and I drove it around many years ago. I completely disassembled it in preparation for a rebuild, but lost interest and moved on to other projects. I still have ALL the parts. Instruments, latches and detail pieces were stored indoors. Hood, grill, window frame and tailgate are solid with surface rust. Seat frames are in great shape.
Email me if you want more pics. I think it’s a great foundation for a Willys project.”
UPDATE: **Status Unknown** WAs priced at $3000
(07/19/2010) “I have a 1951 jeep willys project that I am looking to sell or trade. the willys has a odddfire buick v6 in it that runs good, I bought a brand new rebuilt narrowtrack dana 30 front axle with a spartin locker and regeared to 5.38, I started the yjspring over on the front already but just tacked up, have the rear springs too just haven’t started on that yet, have a lot of extra parts. Have the windshield and everything just took it off so it didnt get broken when working on it. The only trades I will consider are a 250 2 stroke 03 or newerer or maybe a 450f. as far as brands im pretty open to them all rm cr yz kx or ktm or $3000.”
