CJ-3A Research Archives

CJ-3A, CJ3a

To Top

1950 CJ-3A Bulvedere, Tx $5500

December 3, 2009 • CATEGORIES: CJ-3A • TAGS: , . This site contains affiliate links for which I may be compensated.
0

Here’s an unusual arrangement of rear sitting.

“All bearings, brake parts and lines, steering linkage, wiring harness, gas tank and gas line, windshield and gasket, radiator, fuel pump, carbuator, water pump, alternator, hoses, all replaced with new parts. Electrical converted to 12 volt. Engine has oil filter cartridge system. All clutch parts new. This vehicle is a solid runner. It has 16 inch rims, which are not the original 15 inch rims. Tires are 7.50X16 and are probably 25 years old with tubes and have always held air. I have owned this jeep since 1987 and have done all of the work except rebuilding the engine, which was done professionally. Drives good, no shimmy. Floor starter. All guages replaced with new, however the gas guage needs to be replaced as it was burned out when the conversion to 12 volt was done. This jeep is ready to use.”

Learn more at Autotrader Classics

1950_cj3a_bulvedere1

1950_cj3a_bulvedere2

1950_cj3a_bulvedere3

[fb_button]
 
To Top

1952 CJ-3A Rockford, IL **SOLD**

December 2, 2009 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $4500

Check out the length of those front shackles.

“For sale is a 1952 Jeep Willys CJ 3A. Engine is a buick V-6. Lots of work done on engine gaskets etc. Rubbers are 31″ MTRS need to be replaced. 16″ Eagle Alloy rims.”

1952_cj3a_rockford2

[fb_button]
 
To Top

CJ-3A Bodies Alameda, CA **SOLD**

December 1, 2009 • CATEGORIES: Body Parts, CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.
1

UPDATE: **SOLD** Was $800

Note the bottom blue tub.  It has the custom dash that I’ve seen on 5 or 6 or jeeps from California.  Also, it appears that it doesn’t have a driver’s side gas inlet as a part of the original design.  Anyone know anything about these bodies?

“I have 2 1940’s willy’s tubs the one in the photo the grey one on top has fenders hood tub and windshield frame – needs grill and tailgate and the blue one on the bottum is just a tub I am willing to sell them together or apart please call.”

 

2flatfender_bodies_alameda

[fb_button]
 
To Top

1950 CJ-3A Seattle, WA **SOLD**

December 1, 2009 • CATEGORIES: CJ-3A • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $4500.

This jeep has a variety of upgrades.

“1950 Willys CJ-3A, NO RUST, very solid all steel body on 79 DJ-5 frame, 231 Buick V6, Almunimum radiator, push fan, 400 turbo automatic transmission, Dana 20 transfer case, centered dana 44 limited slip flanged axle rear end. 3.73 gears, Dana 30 front end with new 11in brakes. Drives like a new Jeep. Full roll cage with padded top tubes, new steering wheel,tub is durolined. 33×12.50×15 tires with less than 1000 miles driven. 2″ receiver hitch on custom square tube rear bumper. gas tank under back. Levi Strauss edition front and rear CJ-5 seats. New turbo mufflers. All new wiring. Tilt wheel, saginaw power steering, new Rancho front lift springs and 5000 shocks. Bikini top only. Engine runs strong, cold starts and warms up fine, compression is good in all cylinders. (I do not know any mileage of car or engine).  This is one a CLEAN, V6 Automatic cj3a done right. zero rust and garaged.”

1950_cj3a_seattle1

1950_cj3a_seattle3

1950_cj3a_seattle5

1950_cj3a_seattle2

1950_cj3a_seattle4

[fb_button]
 
To Top

1953? CJ-2A Burlington, IA **SOLD**

December 1, 2009 • CATEGORIES: CJ-2A, CJ-3A This site contains affiliate links for which I may be compensated.
2

UPDATE: **SOLD** Was on eBay.

“VERY NICE! 1953 CJ 3A WILLYS. RESTORED BODY OFF-ALMOST-NUT & BOLT RESTORATION. 16,267 MILES. PRETTY MUCH EVERYTHING ON THIS JEEP HAS BEEN REPLACED WITH NEW OR REMAN PARTS. REMAN MOTOR. COMPLETE CLUTCH SHOCKS & SPRINGS. ALL NEW BRAKES & HYDRAULICS. RUST FREE ORIGINAL BODY. NEW WINDSHIELD ….”

1947_cj2a_burlington2

1947_cj2a_burlington1

1947_cj2a_burlington3

1947_cj2a_burlington4

1947_cj2a_burlington5

[fb_button]
 
To Top

1942 GPW & CJ Flattie Selma, OR **SOLD**

November 29, 2009 • CATEGORIES: CJ-2A, CJ-3A, GPW (Ford MB) This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $500.

I’m not sure if the price is a random number or if the seller will take $500 for both.

“1942 Ford GPW & Jeep CJ. Both for one money. No reasonable offer refused. NO TITLES. Being sold as parts donors. What you do from there is up to you. GPW has combat rims. CJ has overdrive. Both radiators missing. Drive train conditon is unknown. Email for phone number.”

1942_gpw_cj_selma

[fb_button]
 
To Top

1957? CJ-3A Ottertail, Mn $1000

November 29, 2009 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
0

UPDATE:  Price dropped to $1000

This is missing a tranny and tc, but does have some later model running gear with 410 gears.  There might be some value here.

“1957 willys $1200 obo has 4.3 carberated setting in it, but no tranny or transfer case, and no interior. has good dana 44 in the rear and a dana 30 in front, 410 gears trust axles. please do not email it is not mine. call mike @ 218-731-2321 for any questions”

http://fargo.craigslist.org/cto/1487051729.html

1957_cj3a_ottertail

[fb_button]
 
To Top

1949 CJ-3A Project & Parts Fort Campbell, Ky eBay

November 27, 2009 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
0

It’s a project.

“Up for auction is my 1949 Willys Jeep CJ3A. This is a project that I just don’t have time for, due to Deployments. This Jeep runs, the tranny shifts, and the 4 wheel drive works. I do give a guarantee. Just hook up some fuel and a battery this baby will start. I discarded the body because it was too far gone to repair. You can order the body and practically every part for this Jeep through companies like Kaiser Willys. I have purchased a new grill and steering wheel along with other misc. parts. The window frame is in OK shape and will need new glass, it’s flat and will be easy to replace. All this Jeep needs is to be sand blasted painted and ready for body. I will help in the shipping process, I would consider delivering within 250 miles of Fort Campbell KY for 1.00 per mile. I also have a V8 conversion kit for this Jeep if interested. Happy Bidding please e-mail or call me @ 910-309-1623 for questions.”

View all the pics on eBay

1949_cj3a_fortcampbell

[fb_button]
 
To Top

Project Flattie with Aluminum Body Canton, Ga **SOLD**

November 26, 2009 • CATEGORIES: CJ-3A, Unusual • TAGS: . This site contains affiliate links for which I may be compensated.
0

UPDATE: **SOLD** Was $4100

“New Aluminum CJ3A JEEP body on a new 1973 CJ5 powder coated frame. This frame allows the use of a V8 engine. Powder coated Dana 44 rear, Dana 30 front, and Dana 300 Transfer case, are geared for the new tires installed on the polished aluminum wheels. A complete new power disc brake system is still in the boxes. New parts include a new fuel cell, fuel line, wiring harness, body mounts and suspension parts. All the parts for this project cost over $17,000, not including the powder coating, windshield frame and original front grill. I don’t even want to think about how much was spent on powder coating parts. I will offer delivery within a reasonable distance. Call for a list of all the new parts included with this offer. May trade. Call me with what you have.”

aluminum_body_project_canton

[fb_button]
 
To Top

1950 CJ-3A Lindenhurst, Ny **Status Unknown**

November 25, 2009 • CATEGORIES: CJ-3A This site contains affiliate links for which I may be compensated.
0

UPDATE:  New pics.  This was listed at $15,000. Status Unknown.

“Brand new body on 1986 CJ7 frame. Late model rear ends, transmission and transfer case. New 9000 lb. Ramsey Winch. New Best top seats and top with doors. New Roll Bar. New Tires. Needs nothing!!!!! SERIOUS INQUIRIES ONLY!!!!!Joe”

1950_cj3a_lindenhurst2

1950_cj3a_lindenhurst

[fb_button]