Features Research Archives

To Top

PNW4WDA Playday and Races in 70s

• CATEGORIES: Features, Racing, Women & Jeeps • TAGS: , This site contains affiliate links for which I may be compensated.

This is a post I have wanted to publish for a while and finally got to drafting it last night. I have a lot of good memories of Playdays.  One of my most powerful memories was a trip to Pendleton, Oregon, for Summer Convention 1975 (I think that was the year).  It was located in the middle of a clearing in a forest: no buildings, just dirt, grass and trees.  I was 10 and pal’d around with Tim and Steve Carter for most of the weekend. We were kids in a candy store, wandering around and through the various camp ‘cities’, made up of campers and tents and people and jeeps, meeting other kids and having a blast. There were an endless stream of club names and club stickers (on the side of the jeeps) that I’d never seen before.   It truly was a different world …

Most of the images below came from the WWJC Scrapbook I borrowed a couple weeks ago.  Because the book was too big to fit on my parent’s scanner, I had to snap photos of them, which explains some of the low quality.

It’s fair to call this a sampling of events, as I hardly went to all playdays.  Feel free to comment on any I’m forgetting and I’ll add them to the post.

We’ll start out with this article in a newspaper about Jeep Racing from the mid 70s. I have to say I was a little surprised at the ‘retarded’ comment, which just highlights how fast language can change.

Jeep Stuffing: For the first event, let’s highlight this this oddball contest.  Here’s Al “Ham” Hamilton in his old jeep Gypsy B.  He and his Wife Barb were founders and deeply involved in the WWJC and the PNW4WA for many years.  The remainder of the people piled on to this jeep appear to be WWJC members as well.

I couldn’t say how this was judged, but it reminds me of the Yipao events in Columbia where they stuff CJ-3Bs with just about everything.

Barrels: Here’s Al again.  This is a classic event that still endures.  Inspired by the barrel racing event you’d find at horse races,  barrels were positioned in a triangle.  The racer starts at a gate, circles around each as fast as they can, then heads back to the gate.

The Gypsy B was Ham’s road/race/trail jeep.  As you can see, Ham didn’t even bother to take off the winch. He even scored some trophies in his jeep (well, at least one big trophy according to the scrapbook).

Potato Stab: In the Potato Stab, a racer races around a track and stops at each box of potatoes to allow the passenger to stab a potato, put it in a sack, and race onward.  The fastest time won.  There were variations of this event. One variation involved popping balloons instead of picking up potatoes.

Balloon Throws: This was just for fun.  Two jeeps would pass each other and water balloons were thrown.  I *think* this picture was taken at the Beverly Sand Dunes in Washington (near Vantage).  In the CJ-5 is my mother driving and my sister riding shotgun, probably in the late 70s.  This is Dad’s post rollover Jeep, note the cage has 4 loops with two in the middle.  It’s the kind of cage you install in your jeep after you’ve rolled down a hill 5 times.

Balance Beam: The balance beam is pretty self explanatory.  Again, this is my mom and sister (which is kind of weird, because I do not remember my sister or mother ever doing any of this). The object was to balance as quickly as you could.  This had to be around 1973 — in other words, this is the pre-rollover jeep.  I’m not sure why the side of the body on this jeep is so beaten up.  I’ll have to ask Dad if he remembers why that is, though I suspect he might say something like “cuz your mom drove it” 🙂

Balloon Pop: In this event, a child drives a course and stops at a special spot.  Once stopped, the child jumps out, runs to the balloon, pops it, runs back to the jeep, and completes the course.  This jeep appears to sport a Bobcat fiberglass body, though it appears to be just a body shell.

Banana Course (no image): In the banana course, a driver drives the course with a passenger.  At a particular spot, the driver stops and the passenger hops out and runs through a little obstacle, consumes a part of a banana, hops back in the jeep and then the driver finishes the course.  There were probably variations of this as well.

Tire Pit: I suspect this is a precursor to the mud bog, but I couldn’t say.  I don’t remember ever seeing this event in person.  I suspect the object is to get out of the pit the fastest?

Obstacle Course: Still included in racing today, this course is a tight course, usually muddy, that racers try to get through as fast as possible. Below is an image of me after an obstacle course at the ORV Park Near Olympia during the 1985 Summer Convention.

Team Relay: This has been and continues to be a traditional end of the playday/summer convention race. It involves four teams of four jeeps and four drivers on one course. The object is to get all four drivers around the course one time. Each team is assigned a colored flag to make it easy to identify the teams while they are racing. The top two teams to finish a round advance to the next round. The team that wins the final round wins a trophy.

When I last raced, this event would take the entire day. There were many, many teams and people. It’s a fun event to participate in and watch.

The first time I ever ran this event (March 1985 on a cold weekend north of Everett), I broke the front driveline in my jeep in the first round, I broke the front driveline in Tim Carter’s race jeep Priority (version 1) in the second round, and I thought I had broke the front driveline of Jim Carter’s jeep Otis in the 3rd round (we lost, so we didn’t advance after that — and I was relieved!), but fortunately I didn’t break it. I have never broken a driveline since. Weird ….

Other events not shown:

Water Course: The object is to get around the course the quickest without spilling water held in a cup by a passenger.  It’s a slow, but comical race.  A derivation of this involves an egg; if I remember correctly, the passenger carries a spoon, on which they balance an egg through the course.  If the egg falls off, they have to stop and can’t start forward again until the egg is back on the spoon.

Tonka Course: Kids put strings on their Tonka vehicles and pull them as they run through a course.  There were other kid-specific courses that I don’t remember.

Backwards: The racer drives a course forward to a stopping point, then has to drive the course in reverse as fast as possible.

The Divorce Course: The driver is blindfolded.  The passenger must tell the driver how to drive the course.

Cross Country Course: This is still in racing today and is a faster, longer course designed for faster speeds.

Hill Climbs: Self Explanatory.  I haven’t seen one of these in a long time, but they got held occasionally.  A derivation, based on the newspaper article above, is the chain hill.  In this event, climbers put chains on their jeeps and try to climb hills.  However, these hill climbs do not compare to those crazy Finnish Hill Climbers.

Drags: Self Explanatory.

King and Queen: This race is still run today. I’m not exactly sure when this was first run. If I understand correctly, this is an elimination race where 2 racers compete against one another.  One racer starts on one half of the track and one on the other.  Each racer completes the entire track.  The first one to complete the race advances to the next round.   The man that wins the final round is King and the woman that wins her final round it Queen.

Sprints: You can still find this racing occasionally (Here are some pics from earlier this year).  This is head-to-head competition where a group of racers have to race a certain number of laps on a course.  I never saw this at a playday, but did watch the Yakima Mud Races with were sprints in mud.

Top Eliminator: Only the fastest winners in certain events (such as the fastest cumulative times in the obstacle, cross country and barrel races for example) race in this race.  There are no separate classes.  The winner is the top racer (male and female brackets) for the weekend.  The race track is usually a tighter version of a cross country course.

[fb_button]
 
To Top

Pics from the 2nd Annual Northwest FC Get Together

• CATEGORIES: Event, FC150-FC170-M677, Features • TAGS: This site contains affiliate links for which I may be compensated.

The 2nd Annual Northwest FC Get Together was this past weekend in Olympia.  Josue was kind enough to forward some images from the event and give his take on it.

Josue writes, “Last weekend was the first opportunity I have had to visit a Jeep get-together. It wasn’t a huge turnout but it was definitely worth visiting. The meet-up was in Olympia, WA and it was specifically for Forward Control Jeeps. This was the second year and only about 8 showed up, although I’m sure it will get bigger with time. It was fun talking to a few people and seeing a couple of them run.”  Thanks Josue!

[fb_button]
 
To Top

Colin’s friend Al & his Willys

• CATEGORIES: CJ-2A, Features, Willys Trucks, Willys Wagons • TAGS: This site contains affiliate links for which I may be compensated.

Colin’s friend Al has got a nice collection of Willys.  Colin forwarded a few pics of Al’s jeeps with some notes. Nice looking vehicles Al!

Colin writes, “I attached a photo of a CJ2A [al toy] that I did for a buddy of mine sitting on the hood of his August-built 1945 CJ2A with column shift, rebuilt with a lot of the leftover MB stuff that Willys used to get the first CJs on the road.

Al also has a 47 2WD wagon, a 49 Willys truck and a 49 Jeepster that is undergoing a repowering with a 55 Chrysler 331 Hemi, 727 trans, Mustang II front suspension and 56 Corvette rear end.  Aside from body work and paint, Al does all the work himself and does an excellent job.  The shot of the wagon with whitewall tires is the same wagon.  Amazing what a set of wide whites will do for a car.”

[fb_button]
 
To Top

Surviving a Nuclear Blast …

• CATEGORIES: Features, Old Images This site contains affiliate links for which I may be compensated.

Just a few Updates Tonight ….

As a kid in elementary school, I remember climbing under my desk as part of our emergency drills (earthquake, nuclear blast, bully avoidance).  But, I always wondered what I would do if there wasn’t a desk to dive under!

Now I know the government had already been planning for a lack of desks.  Thanks to this image Alex spotted on Wikipedia, I now see that I just have to locate a Willys Wagon and dive into it for safety.  Sure, it might get blown over, but it would sure be more comfortable than getting trapped underneath my desk (unless I was trapped under my desk with my sweetheart from 6th grade Michelle, but that’s a whole ‘nother story)!  See the expanded image here.

[fb_button]
 
To Top

Sam creates E-Brake Basic Training

• CATEGORIES: Features • TAGS: This site contains affiliate links for which I may be compensated.

No one can say that Sam and his wife Alecia don’t have a sense of humor.  This tutorial had me laughing for a while today!

From Flatfender Willys Academy comes Sam’s explanation of the center emergency brake mod. …. Take it away Sam …

E-BRAKE BASIC TRAINING

2. This is a 78 Merc Capri E brake. There are 3 bolts that hold it in place. The wires are for a dash warning light. The hole to cut is just larger then the width of the fulcrum and slightly longer than the fulcrum travel.

3. The part in the image below goes under the floor and the cables from the rear loop through this cable guide. If the cable is too long, cut to length and use your cable locks.  The best location for the brake is close to the seat.

4. This is the housing which is screwed down with screws.  Use the housing to determine the location of E-brake.

5. Double check for clearance and reach by working lever up and down. If it feels good, install!

6. This E-brake is from a Hyundai. Most Japanese cars will work, but Ford is the easiest way to go.

7. This is also from a Hyundai, but boot needs to be modified. So you get busy with that E-brake while I give that maggot who shrunk my jeep a major malfunction….FALL OUT!

More Information:

It usually takes about a hour to install with 3 bolts, nuts, washers, and two cable clamps. Once you get the brake installed in the vehicle where you can grab it comfortably, hooking up the cable underneath is a no-brainer, no matter what year it is. I have also used this unit on drum type brakes.

In the image below, I’ve installed a brake in a CJ-3B with a CJ-5 Chassis.  The installation is slightly different from that of the CJ2 etc. Total cost of the E-brake and cover at Pick-in-Pull for this project was $5.00. Cost of the clamps (2) and 3 bolts was $3.25 for a total of $8.25.

Comment by Dave …. This is the only other floor mounted emergency brake that I’ve seen.  Unfortunately, the pic isn’t that good.  But, you pull back on the stick to set it and push the button at the top to release it. You can see the rest of the pics related to this jeep here.

[fb_button]
 
To Top

Is this possibly a GP or MA Body? California City, Ca **SOLD**

• CATEGORIES: Bantam-FordGP-WillysMA-EarlyJPs, Features, GPW (Ford MB), MB, Unusual This site contains affiliate links for which I may be compensated.

UPDATE:  This appears SOLD, but was listed at $800.

I could be wrong, but the slopes and cut of the passenger and driver’s sides look very similar to a Willys MA, thought maybe a Ford GP as well?.  This has been hacked up a bit, but it’s worth a look.  Check out what appears to be an emergency brake as well.

“Clear title has orignal old style pink slip non op for 20 years but probably off dmv record now… 4×4 ran when parked 10 years ago”

[fb_button]
 
To Top

Bruce Finds Some More Las Brisas Surreys

• CATEGORIES: DJ-3A, Features, International • TAGS: This site contains affiliate links for which I may be compensated.

Bruce forwarded me these unusual and rare posts cards of some unusual Surreys (here’s a compilation of Surrey & DJ info). Bruce has attempted to contact the Las Brisas Manager to learn if they have a historian of sorts for their jeeps in use, but he hasn’t had any luck. If anyone has any Las Brisas connections, please let me know!  Thanks for sharing Bruce.

Check out the guy driving the jeep, a stick no less, carrying a tray of food!

Brian writes, “These 2 jeeps offer clues but also leaves one with more questions. The extended tub, tailgate, baby moon hubcaps, valance panels, and an absence of chrome bumpers.  Also, there was no date stamp on the card, but it looks to be from the late/early 50-60s.

On the back of the postcard, written in both English and Spanish, it reads Room service by jeeps- unique at hotel Las Brisas in Acapulco where every room a has it’s own pool.”

[fb_button]
 
To Top

DIRT: The Movie

• CATEGORIES: Features, videos This site contains affiliate links for which I may be compensated.

In an email today, Jeff mentioned a movie I had not heard of called DIRT (IMDB Link).  Released in 1979, the movie follows a narrator around as he explores the wide-world of offroad racing.  It’s got some especially great/scary clips of early auto racing. The rest of the movie shows all kinds of different offroad racing in the US during the late 70s (sand, water, hill climbs, baja, snow climbs, and more). One item I had hoped to see, but didn’t, was PNW racing, though I didn’t have time to watch every clip.

Currently, you can watch the movie for free via YouTube.  However, you can also order a DVD from Turner Classic Movies (about $11) or from Amazon.com (About $6).

Here’s the first YouTube installment.  At the end of each installment, there is a link to the following installment (10 total).

http://www.youtube.com/watch#!v=MfByldRKTo4

[fb_button]
 
To Top

Jeff’s Fiberglass (Bobcat Body) Flattie

• CATEGORIES: Builds, Features, Racing • TAGS: , , , , This site contains affiliate links for which I may be compensated.

After seeing some of the posts about the old Desert Dog and Bobcat ads, Jeff dropped me a note saying he’s been enjoying the old ads and old pics as it reminds him of the busy Northwest days of jeep clubs, playdays and racing in the northwest.  So, he forwarded me a pic of one of his jeeps (he also has a sand drag jeep listed below for sale).

He’s been nice enough to let me post it.  I really love the creative paint job — I haven’t seen anything quite like it.

Jeff writes, “This bobcat jeep was bought back in 1983 as a project.  It was a body and a HUGE pile of parts, to which I’m sure your readers can relate. Currently, it runs a 355 chev w/ ford toploader 4 speed, a dana 20 case, a ford 9inch w/ 35 spline summers axles spool nod case and 6.00 gears.  The front is a gutted mdl 27 w/ a mustang rack.  The cage is chromoly.  The car weights 2250lbs w/o a driver.”

[fb_button]
 
To Top

Colin’s ’48 Jeepster

• CATEGORIES: Builds, Features, Jeepster • TAGS: This site contains affiliate links for which I may be compensated.

As I mentioned yesterday, besides his grandkids mini-jeep, Colin has worked on several different Willys.  Here’s his Jeepster that was featured a couple times in JP Magazine, specifically the June 2007 issue and the January 2008 issue.

Colin writes, “Here are some photos of our 48 Jeepster.  We have had this car for over 33 years and when we bought it, it had a non running Studebaker Champion 6 engine in it.  Once we got it running and back in decent visual and mechanical condition, we drove it that way for many years. Around 1990, I stored it in our garage and worked on other vehicles and a house remodeling project (a happy wife makes for a happy home!).  I did our Corvette restoration from 1994 until 1998.  After I retired in 2003, I began putting ideas together about re-doing the Jeepster.  I wanted a car that looked original on the outside, which it did already, but with an improved drivetrain and suspension under it to keep up with Phoenix area traffic.  After a lot of research, I decided a Buick V6 was the way to go.  I found a freshly rebuilt (still in the plastic) 1982 Buick 231 even fire V6 for a very reasonable price.  I pulled the front sheet metal off the Jeepster and got to work.  With an updated engine going into it, I chose to put a Mustang II front end kit with tubular A-arms, Ford disc brake rotors (I wanted to use stock Jeepster wheels, hubcaps and trim rings), and rack and pinion steering into the chassis.  A buddy of mine and I did the majority of the front end work in a weekend.  I used a set of engine mounts from Novak Engineering in Utah and bolted the engine to a 1967 Muncie close ratio 4 speed that was in my parts bin.  For the rear end, I found a 1969 Ford Mustang 8 inch with 2.79 gears.  That rear end is a bolt in for any of the 46-63 Willys 2 wheel drive wagons, panel deliveries and the 48-51 Jeepsters. I also used a front sway bar and on the rear, a Willys Jeepster/station wagon sway bar. I did upgrade the Buick with a set of finned aluminum valve covers from TA Performance,  a 4 bbl Holley 390 cfm carb from a 65 AMC 327 engine and dual exhausts.  The end result is a Jeepster that runs great( 1750 rpm at 65-70 mph), gets excellent gas mileage(about 26 at 65 mph) and handles like a sports car(better than our Corvette!).  All of this work was relatively easy, even though it took me a while.”

In this first pic you see both his Jeepster and the 1960 Surrey he purchased that can be seen here.  Colin has been restoring the Surrey as well.

[fb_button]