How did Patterson’s accident occur? It’s the result of a cascade of several events.

Patterson has sat for the better part of two years, which likely caused the fuel pump to stop working. Already knowing it didn’t work, and because I was going to have to drive it on the trailer on Saturday (loading a vehicle at my mother’s place is awkward due to the terrain), I tried to buy a cheap electric fuel pump on Friday, I found some $12 cheapy electric ones on Amazon, but it was too late to order off of Amazon, so I figured I could pick up a cheap one at AutoZone or NAPA. Right?

Wrong. The cheapest ones that had were $50 and up. Worse, they were eight inches or bigger. I just wanted a small, two inch fuel pump to get it on the trailer. Even worse, I have a brand new electric fuel pump somewhere; but, given the move, it’s impossible to find right now.

To complicate things, Ann was sick on Friday, so I had to take her mom in for her bi-weekly post-cancer infusions, so that ate up time I had hoped to use to hunt for an electric fuel pump. With time disappearing, I fell back onto an old school idea: rig up a gravity feed setup.

On Saturday morning I had planned to waked up at 3:30 am to head to Renton so I could build the gravity feed, get Patterson running (so it would be ready to load when Steve arrived with the car trailer, as we had a tight time table), and load a cargo trailer that I was towing. Unfortunately, I woke up at 1:30am and couldn’t get back to sleep. So, by the time I arrived in Renton at 7:00am, despite my coffee injection, I was already feeling a little tired.

My mother’s garage looks like it was destroyed by a tornado, but in reality, it’s her storage system (sorry mom). So, hunting down 1) extra fuel tubes and 2) a useable reservoir in which I could hold some gas proved difficult and frustrating. Eventually, I cut some hoses off of Biscuit and cobbled this device together:

The “fuel overflow” container was a plastic Costco Mixed nuts container. A handy steel funnel was just wide enough to sit on the mouth of the container, yet had a perfectly sized opening at the bottom to slide into a rubber fuel line.

To put it together, I drilled a hole in the nuts container, then slid the rubber fuel line into the container, sealing it with silicone. Then, I used a steel fuel line and a second rubber hose to feed the carb. I then taped the whole assembly to the driver’s side mirror, which put it high enough to feed the gas into the carb, yet it hung over the side of the jeep so that gas wouldn’t spill onto the jeep.

This shows the system before it was taped to the mirror.

With the system in place, I poured some gas into the funnel and Pattrerson started right up.

So far, so good.

However, I noticed that the brake and clutch were both really tight. If I push the brake, the clutch also went down. To get the clutch to release, I had to physically reach down and pull it up by hand. I didn’t have time to address this issue on Saturday morning, but figured I could work around it.

With the jeep in “neutral”, and me in the jeep, I released the clutch with my foot, but it remained depressed. I figured, given the jeep was in “neutral”, that I could exit the jeep, block the tires, and let it warm up a little. Before I exited the jeep, I double checked that the column shift transmission was in neutral by wiggling the shifter up and down.

I hopped out of the jeep, but before blocking the tire, I reached down to pull out the clutch (why, I don’t know why I felt the need to do that .. should have let sleeping dogs lie) …

Anyway, when I pulled out the clutch, instead of remaining in neutral, somehow the jeep was in reverse. Suddenly, with the clutch-plate engaged, Patterson began rapidly moving backwards.

It was a moment of horror, the realization that there’s nothing I can do but watch Patterson jerk backwards. And, at that moment, I realized the cargo trailer I had rented was Patterson’s prime target. Why Patterson took exception to the trailer isn’t clear, but he ran into that trailer with all that power he could muster (thankfully, he doesn’t have all that much power). Fortunately, the trailer stood its ground, with the only damage being a broken running light. Patterson definitely got the worst of it, sigh.

I suppose the good news is that Patterson was never a trailer queen. I can pull out the dents and fix the bumper.

The thing that haunted me for several hours was how it happened. I was sure I had it in neutral and had tested it several times. Eventually, as I was driving back to Prosser, it finally dawned on me that neutral on the column shifter was “back and forth”, not “up and down”. What I thought was neutral was the shifter moving between 1st and reverse. The gears were so well aligned that it just felt like neutral.

So, it was partly stupidity on my part and partly something that wouldn’t have happened had the clutch been working correctly and/or the fuel pump working correctly, as that had definitely been my focus.

As Colin notes, this is a great excuse to upgrade my lights back to stock.

The next challenge is moving Biscuit….

Patterson arrived yesterday on Steve’s trailer (a big thanks to him), but things didn’t go smoothly at first (I will explain more tomorrow).

For example, some days you have to resort to old school carb techniques to make the jeep roll..

While at other times, the jeep rolls on it’s own …

You may have noticed that regular updates have returned. I hope to keep them going, though I may still need a few more days off than normal.

For example, we discovered yesterday that some of our outlets in the living room didn’t work. Three of them each had their bottom portions of the outlet on a three way switch, but the wiring was never completed. I made them work, but not via the three-ways switches. Whoever wired it, did it oddly, so I bypassed the switches. Because we hope to remodel the living area next year, my fix will do for now.

Our back pasture has three and a half new ‘squatters’ in the form of three cows and a calf. A neighbor offered to managed the back pasture in exchange for keeping his cows there. He rebuilt some sections of the fence and brush-hogged much of the grass. He’s getting a good deal, but, for this summer at least, it’s one less thing I need to manage.

Today I left early for the “west-side” so Steve Carter and I can bring back Patterson. I tried to purchase a cheap electric fuel pump yesterday, as the one on Patterson isn’t working at the moment. I only need it to get Patterson up on the trailer, but neither NAPA nor Autozone was capable of selling me a cheap pump. All the ones they had were 8″ long and $70 or more. That was overkill for what I want. So, I’ll do a simple gravity feed setup.

Progress has slowed on unpacking as Ann hasn’t felt good for a couple days.

We had a few amazing, golden sunsets over the past few days. This place will be a bunch of work for the foreseeable future, but evenings like this make it worth it.