Parts Research Archives

To Top

1961 Willys 226 Super Hurricane $125 Mills, WY

• CATEGORIES: Engine, Parts This site contains affiliate links for which I may be compensated.

1961 Willys 226 Super Hurricane $125 Mills, WY

226 might be able to deal and wheel here, some good bits maybe.

Information from seller:

Make offer, seeing if anyone needs before going to scrap, block seems good no oil pan missing head would make good core to build

https://www.facebook.com/share/1EERhNxpGu/

[fb_button]
 
To Top

1959 Willys T-90 and D18 $800 Johnstown, CO

• CATEGORIES: Parts, Transfer Cases, Transmissions This site contains affiliate links for which I may be compensated.

1959 Willys T-90 and D18 $800 Johnstown, CO

Might be a good pick up for someone.

Information from seller:

This is a good T-90 transmission and T-18 transfer case. Included is a Dualmatic overdrive gear. The entire unit is in very good condition. It could use new gaskets. The Dualmatic overdrive is a Warn knockoff. Included is a aftermarket shifter with back-up switch for back-up lights. Calls are best- nine seven 0- 2 one five- 9 four six nine. Will not respond to is it available. If it’s listed it is available. I do not answer messages every 5 min. Call me – thanks Michael

https://www.facebook.com/share/1FpDyJkLDf/

[fb_button]
 
To Top

1949 Willys Jeepster Parts and More Welland, ON

• CATEGORIES: Jeepster, Parts, Transmissions, Willys Trucks, Willys Wagons This site contains affiliate links for which I may be compensated.

1949 Willys Jeepster Parts and More Welland, ON

There are a bunch of Jeepster and Willys Parts on a few listings, so if you need something maybe reach out and see what’s up.

1949 Willys Jeepster Rear Axle CA$200 Welland, ON

Posted as a Dana 23 out of a Jeepster, 4.88’s (39/8) which typically match up to the 226 it looks to have had in it so might be some R/P parts here, used gear sets can be tricky to set up, but axles look to be there, some backplates. Most used axles I have picked up are in this price range or slightly lower so its not priced way out there either.

Information from seller:

Axle came out of a 1949 Willys Jeepster, both sides spin freely. Dana 23 I believe. 39/8 tag reads. Have not taken cover off. Pick Up ONLY

https://www.facebook.com/share/1FqG5NssML/

Willys 1949 Jeepster Original Radio CA$1,700 / USD$1200

Information from seller:

When I bought my Jeepster this came with it, I did not install, did test it and light came on and all dials work. 6v, Guy said it was rebuilt. Comes with the Jeepster correct dash cover. Thats all I can tell you. Pick up In Canada 40 mins from Niagara Falls NY boarder/ Fort Erie boarder. Will ship with exact purchase price and Ins. for customs. $1200.00 US or $1700.00 CAD

https://www.facebook.com/share/14Hibop1RTx/

Jeep/Willys T-90 Transmission Case Housing CA$1 

Information from seller:

Willys/Jeep T-90 transmission case, no chip/cracks, all screw hole threads intact. Take your pick. These have the screw holes for the oil slinger. All so have internal used parts. US funds paypal AS IS I can ship might be a little heavy on shipping cost.

https://www.facebook.com/share/1EUjuBgNYN/

Willys wagon rear license plate assembly CA$80  

Information from seller:

Willys wagon rear license plate assembly, basical all there needs attention. $80.00 plus shipping from Welland Ont. I added LED light on inside to my bracket, works better then original 1156. Also included is plexy glass for lens cover, to be modified.

https://www.facebook.com/share/1Ankh1UaLF/

Probably will do some more from Canada lots of neat stuff posted.

[fb_button]
 
To Top

Dealer Visor Covers For Sale on OldWillysForum

• CATEGORIES: Advertising & Brochures, Parts This site contains affiliate links for which I may be compensated.

Dealer Visor Covers For Sale on OldWillysForum

Over on OldWillysForum (OWF) there was a group effort to reproduce the Dealer Visor Covers that the dealers put on Willys vehicles when delivered to customers.

If you are looking for that little conversation piece to add on to your Willys, please head over there and pick one up from their Store.

Dan B (@scramboleer) does a great job coordinating the effort, a special thanks to him for taking this project on, and to all the others that helped design and provide feedback to Dana (@Signsmith) who helped with the layout and graphics.

https://www.oldwillysforum.com/owfpages/page0/OWFcal.html

Now available: Willys dealer visor sleeve, reproduced on heavy-duty cardstock and pre-folded for easy installation.

Price includes shipping via USPS, custom packaging, book binding tape, and PayPal fees.

1. OWF All Stars – $19 for one sleeve (plus OWF sticker), $36 for two
2. General – $24 for one sleeve (plus OWF sticker), $41 for two

FAQ:
1. How many of these exist?
48 copies were printed in the first batch of printing.

2. Are they perfect?
No. There are a few inconsistencies (see pic below) that we will fix for the next version, if demand exists.

3. If printed, will the next version be cheaper?
No, the next round will be slightly more expensive.

4. How long does it take to arrive once ordered?
Estimate one week, depending how far you are from the West Coast.

[fb_button]
 
To Top

Koenig Winch W/Model 41 PTO $725 Lucas, OH ***SOLD***

• CATEGORIES: Other 4x4s, Parts This site contains affiliate links for which I may be compensated.

Koenig Winch W/Model 41 PTO $725 Lucas, OH ***SOLD***

Andy’s Picks

Another Koenig Winch setup (Sold)

Information from seller:

For Willy’s Jeep PU’s & Wagons, these items are very rare and in good condition. The PTO has been completely rebuilt and both move freely as they should. I have not installed either as they came with trucks purchased over the years. I would be willing to meet if distance is reasonable, items would be heavy to ship but would do that at buyers expense. These will be listed on other platforms, message me if interested. Thx

https://www.facebook.com/share/15WyYrpMrg/

[fb_button]
 
To Top

Canfield Wrecker Tow Crane $200 Ithaca, NY ***Sold *** 

• CATEGORIES: Machinery, Parts, Unusual This site contains affiliate links for which I may be compensated.

Wrecker tow crane $200 Ithaca, NY ***Sold *** 

Andy’s Picks (This is really one of Andy’s Picks!!, good luck with this one looks like a neat piece for sure)

I purchased this one! So excited- but for the records.

XH-305 Canfield Tow Bar Co. Wrecker

Information from seller:

Wrecker body. Mid 1960’s I believe. What you see is what I have. Going to scrap if no one wants it.

https://www.facebook.com/share/1DpRgiFmWE/

[fb_button]
 
To Top

1953 Willys Pickup Chassis $350 Deadwood, SD ***PENDING***

• CATEGORIES: Parts, Willys Trucks This site contains affiliate links for which I may be compensated.

1953 Willys Pickup Chassis $350 Deadwood, SD ***PENDING***

Andy’s Picks

good parts for a pickup ***PENDING***

Information from seller:

Willie’s 1953 rolling chassis pickup, comes with axles, tires, frame, box, Cowell cab, and many extras in the box. Can help load. Price is negotiable, cash only. Pm me for more info

https://www.facebook.com/marketplace/item/1270653054396044/?ref=saved&referral_code=null

[fb_button]
 
To Top

Half Cab Willys CJ3a or M38 $75 New Haven, CT

• CATEGORIES: CJ-3A, M-38, Parts This site contains affiliate links for which I may be compensated.

Half Cab Willys CJ3a or M38 $75 New Haven, CT

Andy’s Picks

2A/3A/M38 half cab

Information from seller:

Very light half cab for a Willy’s Cj3a or M38. No doors. Includes the frame to hold it when not in use. I will trade for 16” Willys steel wheels.

https://www.facebook.com/marketplace/item/1248002623640186/?ref=saved&referral_code=null

[fb_button]