stainless/jewels Research Archives

To Top

Flatfender Parts and Stainless Olympia, Wa **Fenders sold**

• CATEGORIES: Body Parts, CJ-3A, Parts, stainless/jewels This site contains affiliate links for which I may be compensated.

UPDATE:  *Fenders sold**

“These parts are off my 51 jeep willys.

* aluminum rocker cover/gards $50
*custom steel fuel tank, alittle bigger then stock. clean/no rust $50
* aluminum corner gaurds $10
* aluminum dash powder coated blue with a
Black vein. It has some gauges in it as well. $40
* custom tube grill wth off road lights powder coated blue with Black vein $50

Any questions or want more pix
Please tex 3604023307
Thanks for your time”

http://seattle.craigslist.org/oly/pts/2797290053.html

[fb_button]
 
To Top

Stainless Fenders Denver, Co $1200

• CATEGORIES: stainless/jewels This site contains affiliate links for which I may be compensated.

No pics provided.

“Stainless steel fenders for willys jeep Cj3a cj3b cj2a these fenders are new been sitting in my garage for 25 years need them gone
they fit willys jeeps 3b 3a 2aa m38 the passanger one has the battery box cut out .
Leave number and i can text pictures will trade for studded tires 235/75/16”

http://denver.craigslist.org/pts/2779229466.html

[fb_button]
 
To Top

1953 CJ-3B Camas, Wa **SOLD**

• CATEGORIES: CJ-3B, stainless/jewels • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  **SOLD**

Nice Jeep.

“1953 willys 3b hihood ,Edelbrock performer 350/350 turbo,dana 30 with disc brakes and air locker,dana 44 rear with air locker,dana 20 twin stick,
full cage roll bar,33×14.50×15 ssr super swampers with polished aluminum wheels,custom tube frame,heated front and rear seats,full custom stero system jewels stainless grill and tailgate,everything on this jeep is new.”

[fb_button]
 
To Top

CJ-3B Stainless Body Kits Myrtle Creek, OR

• CATEGORIES: Advertising & Brochures, Body Parts, CJ-3B, Features, stainless/jewels This site contains affiliate links for which I may be compensated.

UPDATE:  Back in May of 2011 Mike forwarded me the below ad.  This morning Craig pointed out that Dan over at Hemmings did a nice article about the stainless bodies along with the seller of these kits.

The buyer apparently bought out a stainless supplier in the Philippines. Call the seller for more info.

[fb_button]
 
To Top

Stainless Steel Body Kit Albuquerque, NM $2200

• CATEGORIES: CJ-2A, CJ-3A, stainless/jewels This site contains affiliate links for which I may be compensated.

Looks like a good price.

“Complete 16 gauge Stainless Steel CJ3A Body Kit. Unmolested never installed complete kit including galvanized floor tub, SS doors w/hinges & latches, SS windshield frame w/pivots, SS fenders, SS grille and hood, SS skid plate, SS bumpers, SS spare tire carrier w/cover, SS rear cargo tray, SS roll bar, SS handles, & misc. hold-down latches. Hardware not included. Please feel free to contact direct with any questions John 575-418-1519.”

http://albuquerque.craigslist.org/pts/2729849130.html

[fb_button]
 
To Top

Stainless Steel CJ-3A Los Angeles, Ca $7500

• CATEGORIES: CJ-3A, stainless/jewels • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE:  Price dropped to $7500.

(06/24/2010) It looks like a nice enough jeep.

“I was a leader in the off road industry for decades. I use to own the leading off road company. when i was young I built this Jeep from the ground up in 1967. It has only about 8,000 miles on it (95 percent offroad). It has been featured in magazines like Four Wheeler (i can email articles). It has a Stainless Steel body which is probably worth the asking price alone. I had one, my brother has one and we sold one in 1968 to someone, I do not know of any others that were produced like this. It has a Buick V-6 engine (it is special, steel crank not cast) that was producing 225 horsepower for 225 cubic inches Naturally (no turbo, no NOS, no blower). It has a Borg Warner T-10 Transmission with Hurst shifter, Dana 30 open Knuckel front end with positraction (6 gear steel) 3.73 ratio, disc brakes, Dana 44 rear with positraction. And of course Rancho Suspension. The Jeep has only been driven a few miles (under 400 miles in last 25 years and that is on road) since 1985 when my dad died and I lost interest in going off road. It has a miss at 4000 RPM probably due to not being run much. It is not as slow as some Jeeps, it does over 65 MPH in 1st gear! (it has a 4speed). The fastest i have had it is about 120 MPH in 4th and it had more but it was scary at that speed. This is for an Enthusiast or collector, it is street legal but this was built for off-road.
I HAVE ADVERTISED FOR $13500 AND IT IS WORTH OVER $25,000. I HAVE NOW OFFERED AT UNDER $10,000 SOMEONE WILL GET ONE HELL OF A JEEP. SERIOUS BUYERS ONLY. 310 2921182 GENE my price is firm so please do not even respond if you can not afford the asking price”

http://losangeles.craigslist.org/wst/cto/2655372381.html

[fb_button]
 
To Top

1946 CJ-2A Melbourne, Fl **SOLD**

• CATEGORIES: CJ-2A, stainless/jewels • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $7000.

This has an aluminum body.

“Custom and very beautiful aluminum bodied 1946 Jeep Willy. A real collector or jeep lovers delight. Runs great and is a blast to drive. Has been stored in a shop and handled with care. Included is a new set of 31″ Super Swampers and if interested a custom fabricated and machined aluminum grill. Drivetrain and body are in excellent condition”

[fb_button]