Willys Jeep CJ-5 Front Grill $30 Bloomsburg, PA
$30, Wall Hanger or use it. (anything else to update here?)
Information from seller:
One jeep grill, not bad shape for someone who needs one. Just a little rust on the bottom inside tabs.
Willys Jeep CJ-5 Front Grill $30 Bloomsburg, PA
$30, Wall Hanger or use it. (anything else to update here?)
Information from seller:
One jeep grill, not bad shape for someone who needs one. Just a little rust on the bottom inside tabs.
Willys Jeep CJ-5 Frame $400 Frackville, PA
CJ-5 Frame with spare front Axle w/ Hubs. Not an expert on Hub types so chime in if these are undesirable.
Information from seller:
Willys jeep frame with rears,this was from a 1967 willys jeep cj5,has the motor mounts for the v6 motor,frame was wire brushed and painted a few years ago and covered,has pitting but should be usable,also included is a extra front rear,600.00 obo reduced 500.00 ,,[hidden information] there are a total of 3 axles,,,the two that are on the frame in the picture and I extra front not pictured…
Jeep Willys Roller Mixed Up Parts $600 Mountain Top, PA
Listed as a CJ-5 Frame and Axles, with an M-38 24V F134. Which is listed as still retains some of the 24V stuff. There is some hope here it’s a mix of stuff, but parts is parts. Price if OBO and a little bit of room, you might do OK here. But its becoming Winter out this way, threat of first snow has been issued, so window is getting tight to move this stuff prior to Winter setting in.
Information from seller:
Hello all, im selling off the engine, trans, tcase and whatever jeep willys m38 parts I have. The engine is locked up , have all but 3 lifters free but I just picked up another engine and im not planning to restore it.
This is an L134 and came from my m38 but will work with cj2a, and cj3a jeeps. The bock is a 1950 military era casting and it has the correct head casting. Included is the m38 intake, mil fuel pump, oil filter, 24v generator, waterproof 24v dizzy, lift hooks, intake tube any plumbing or fittings that I don’t need from the engine.
Its sitting inca mid 60s cj5 frame with axles. Rolling and I can deliver loacally. $600 obo! Im in pa 18707. I’m looking a some 16″ wheels 2 to 5 of them depending. 7.50×16 tires. Canvas top, 1/2 top or summer top, Holly 1904 carb, cj2a or cj3a air filter and hat. M38 gauge plate with 12v gauges, vacuum wipers, tailgate spare tire mount. Maybe other stuff ?
1948 Willys Jeep CJ-2A $6,500 Tamaqua, PA
Lots of new parts here.
Information from seller:
1948 Jeep CJ2-A. Clean title in hand. New Willys tub/body, New Willys stamped windshield frame, New Willys stamped tailgate, New Willys stamped hood. Headlight buckets. Front grille assembly. No wiring harness. Engine turns over and spins freely. Frame is solid and in great shape. Easy project!!
1955 Willys Truck $10,500 Catawissa, PA
226 4WD, floors looks pretty solid. Looks like it had a plow on it, pump is still there.
Ok so Rabbit Hole of the day, since this rig pops up in Catawissa, PA if you want to search up Catawissa Hooded Graves there is an interesting back story to a few graves in the Old Mt Zion Cemetery over there. Back in the early 1850’s there were some issues with illegal removal of remains from Cemeteries for medical research, so Mortsafes were erected around several graves. There of course are other more interesting theories surrounding the cages that cover some of the graves. I have worked out in Catawissa a few times and like the saying goes “I spent a week there one night”. Also its right down the road from Knobles a well known and loved local amusement park that is super Family Friendly and just a really neat place to go visit.
So go grab a Willys in Catawissa, catch up on some local History at the Cemetery, and swing by Knobles and that’s a pretty good little road trip.
Information from seller:
1955 Willys truck. Engine runs and brakes work but will need adjusted. Extremely nice condition for a 70 year old truck possibly the original 6 cylinder engine. Thought I would have the time to enjoy it but that hasn’t happened, maybe someone else will. Sorry to see it go but just taking up space now. Have title, delivery possible depending where.
https://www.facebook.com/share/1K3qKJqBoy/
1972 DJ Mail Jeep $995 Landrum, SC
Not good pics. Project for sure.
Information from seller:
The motor needs rebuilt but everything else is fine it’s a neat little project and it’s a jeep
If you are not familiar or its been a while since you have checked this out please head over to their site and consider subscribing and picking up a few of their back issues,
https://www.dispatchermagazine.com/subscribe
There is a lot going on in this issue as always,
Roberto Flores provided a very great article on a local Jeep Event in Spain along with a full page Cartoon Corner. Roberto is a wonderful Artist, Cartoonist, Illustrator, Author and so much more, its fun to see his work and looks like he had a very good time at this event, great to catch up reading his content.
This was a great event as always; lots of work goes into all the events. Looking forward to 2026!
1965 Jeep CJ-5 $13,000 Middletown, NY
Pics are not the best, but it looks super clean! Price if condition matches is not bad IMO. Another Warn OD listed.
Information from seller:
I am listing this for a friend. 1965 CJ5 runs, drives, stops. Current registration and inspection. Newer tires and lockouts and has Warn overdrive. New heater core. Has the F head engine. Odometer reads 974, but it may have been replaced because it looks new. Jeep was repainted a few years ago. Everything works as it should. Any questions please ask. Can get more photos, but you can also come see it. Asking 13,000.00 Call Dave for info. [hidden information]. Due to spam, I will not answer texts. If you are truly interested, please call and set up a time to look at the car. Thanks.
1962 Willys Wagon $1,250 Coopersburg, PA
226, needs some love for sure, but climb under and see what’s going on here. Warn OD shifter, so price is not horrible for what is here.
Information from seller:
Nineteen sixty two willie’s wagon Flathead, 6 cylinder manual transmission high and low. It is complete but needs a lot of work would be a great restoration project. Turn it into a plow, truck, farm, truck or whatever you want to do with it. I have a clean title. It does need a Driver’s side rear leaf spring , asking one thousand two hundred fifty dollars or best offer