UPDATE: Here’s another version of the 24-page “A Report on The Universal Jeep in Conservation” available on eBay. You can view all the pages of the report here. It’s priced at $29.95.
1953 CJ-3A Shingle Springs, CA **SOLD**
UPDATE: **SOLD** Was $5500.
Powered by an f-head.
“1953 Willys CJ3A. It runs and drives, 100% brand new T90 3-speed transmission and rebuilt steering box. Engine is an F head out of a later model versus the L head that would have come factory. 4WD works, hubs and T18 transfer case shift well in and out of 2/4WD and Hi/Lo. Also new front fenders, front suspension (springs, shackles, pivot bolts), new shocks all around. Could use a little carb tuning. Steering is tight with the tie rod ends in good shape.
Frame is straight and not all rotted out. Tub could be better, but it’s 67 year old thin sheet metal after all. Tub floor pan was also bed lined by a previous owner, and free from any cancerous rust. Great starting point for a full restore, father/son build, crawler, motor swap, whatever you want. Simple with literally every part available online to replace anything on the vehicle. Bought it as a project last year and lost interest. Reg expired in 2018 so there are some back fees, unsure what they are. Any questions just ask. 5500 obo”
1960 CJ-3B Ellensburg, WA $7000
Has mods. Still needs a little bit of work of some kind.
https://www.facebook.com/marketplace/item/2448372681935515/
“Nice willys new or rebuilt everything.225 oddfire, t90, twin stick transfer case,power steering,new wiring harness,4v carb,headers,2.5 inch exhaust, new gauges, aluminum radiator. About 90% done.needs to be finished, meny more pictures.”
1949 Jeepster Burken, WA $4250
Could be a good price.
https://www.facebook.com/marketplace/item/2451035458297369/
“4th ’49 Jeepster made. 85,000 miles. Original floor boards very very minor rust. Runs great! New brakes. Fun to drive and gets lots of thumbs up”
1952 M-38 Yreka, CA $4800
UPDATE: Price dropped to $4800.
(06/17/2019) May have an f-head.
https://www.facebook.com/marketplace/item/602524426991177/
“My dads old Jeep runs and drives new seats and fuel system m38 original military have clean title in my name ”
1948 CJ-2A San Francisco, CA $2500
Lots of mods to this jeep. The rear PTO bar has been accessorized a bit.
https://www.facebook.com/marketplace/item/472667696982553/
“OR SALE 1948 WILLYS Solid starting point for a PROJECT. 283 with LT-1 intake, advance adapter headers, advance adapter side pipes, 2 piece scatter shield, Muncie 4 speed, warn overdrive, Dana transfer case, custom built front and rear drive shafts, Dana front with a DANA 60 rear (yes that is a 1 ton rear end) end both sporting 5:38 gears. Locking hubs on the front. GM steering box and column, Hurst linkage, 2 10 gallon fuel tanks. Sand roll bar with a full cage. Same owner since around 1979. I wanted to rebuild it to it’s former glory but just don’t see it happening.”
1951 M-38 PIlot Hill, CA $4000
I believe this pic was taken prior to disassembly.
https://www.facebook.com/marketplace/item/2470755753241277/
“951 M38 Willy’s Military Jeep. It has been converted to 12 volt. I have taken this down to the frame and started to put it back together. It ran and drove before my restoration began. I have lost interest in the project. It has a: Buick V6 even fire out of an early Grand National (better than the odd fires) Dana 27 front axle Dana 44 Rear axle Brand new Rancho 2.5 inch lift kit with new leafs and shocks Muncie SM420 4-speed T-18 Transfer case (brand new adapter from Novak) Super Swamper 32.5 inch tires (5 of them) Front Disc Brakes Power Steering
Parts that come with it: New wiring harness New gauges 4 New Hummer seats, cushions and seat belts Soft top with doors (old has some holes) Aluminum radiator and electric fan Brand new heater All the brass placards for the dash Roll bar New brake lines Many many more parts. All the parts are there to get it back on the road. It is currently on a DJ-5 frame which is 3/4 of the way boxed in, the original frame will come with it also if looking to restore back to original. You will need a trailer to pick this up and a way to haul all the parts. It’s registered non-op and has original CA black lic plate.”
1947 Wagon Lexington, KY **SOLD**
UPDATE: **SOLD** Was $3250.
There’s plenty of work to be done on this wagon. I just liked the old lettering along the side. The hood has the pre-war W-O design on it.
“For sale 1947 willys jeep overlander. No motor or trans. Asking 3250.00 obo make a great project. Has tenn title”
1947 CJ-2A Boring, OR $3900
Runs, but not road worthy. Has Suzuki Samurai axles.
https://www.facebook.com/marketplace/item/552624562252854/
“Note: … It Runs now. Still nds work but moves under it’s own power! if u see this ad, YES its available. ….47 willys jeep, Cj2a. Awesome shape, see pix, no rust bucket here! Has tasteful mods. But not hacked apart like most. Original flathead 4cyl. Engine. Samurai axles, disc brake front. 4″ superlift springs, Gm tilt column, 12v conversion. Was a great ol’ huntin rig. Got put in barn for last 5 to 7 yrs. Got it running still needs dialed in. So No u can’t *drive it home sorry. Have clear title in hand. Price is $3900 cash only, no trade. Go see the rest and you’ll realize its a good deal on this 1! Bring trailer and cash if u want to check it out.”
1951 CJ-3A Port Angeles, WA $5500
UPDATE: Still Available? This is still listed on Facebook.
(08/06/2019) This is a definite 80’s throwback build. The diamond-plating, the engine selection, the high-back bucket seats, and the bobcat hood were all popular northwest mods.
https://www.facebook.com/marketplace/item/497639894112432/
“Thinking about selling my 1951 Willy’s, it has a 151 iron duke 4 cylinder Chevy engine with a 3 speed manual, power steering and a Chevy tilt wheel, 33×13.5 R15 TSL boggers that are almost, new shocks, a 9,000 lb winch, comes with soft doors and soft top, it needs some minor things here and there, but it runs and drives, looking to get 5,500”


























