To Top

1949 Jeepster Elko, MN $19,000

• CATEGORIES: Jeepster • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Still Available.

(11/24/2016) “!949 Willys Jeepster
Complete body off restoration in 2006
Completely stripped of paint and all rust removed and replaced with new metal
All chrome replated
All stainless polished
new gas tank and lines
new brake lines
new wiring 12 volt
new interior
new top
Original 3 speed with overdrive (works)
4 cylinder 134 cu inch flathead
Runs great and a fun car that’s a real attention getter.
Over 1000 hours put into this restoration.
If you are looking for a Jeepster this is a nice one that you must see.Runs and drives great! Fun car and a attention getter! Clean title”

https://minneapolis.craigslist.org/dak/cto/6040531779.html

1949-jeepster-elko-mn1 1949-jeepster-elko-mn2 1949-jeepster-elko-mn3 1949-jeepster-elko-mn4

[fb_button]
 
To Top

1959 CJ-3B Santa Maria, CA **SOLD**

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4500.

Has updates.

“1959 Willys CJ3B with a Ford 302 Smallblock bored out to a 305. Has new battery with leads, new alternator, new starter, warn locking hubs, 38″ mickey thompson dick cepek kevlar tires, and a roll bar. Runs and drives. Clean title but needs TLC.”

1959-cj3b-santamaria-cali1 1959-cj3b-santamaria-cali2 1959-cj3b-santamaria-cali3 1959-cj3b-santamaria-cali4

[fb_button]
 
To Top

1952 Wagon Newberg, OR $3450

• CATEGORIES: Willys Wagons This site contains affiliate links for which I may be compensated.

Steve spotted this wagon. The frame looks interesting.

“This is my 1952 Jeep Willys Overland Wagon project. Virtually rust free. I purchased the custom Matkins frame and components to put together over twenty years ago, but never got started. Now, due to having to many projects and not enough space, it has been moved outside.

Includes;
Matkins custom built frame, purchased new for $2500
Four-wheel drive components for 3/4 ton Chevy
two transmissions
350 Chevy motor
Running gear
Power steering
Steering Column
Hijacker Springs
All body parts and glass
If you’ve been looking for your next project, this is it.
IT IS NOT GOING TO LAST LONG, DON’T WAIT UNTIL IT’S TO LATE!”

https://portland.craigslist.org/yam/cto/6034117715.html

1952-wagon-newberg-or

[fb_button]
 
To Top

1970 DJ-5 JeepRod Milton-Freewater, OR $2000

• CATEGORIES: DJ-5 & DJ-6, Jeep Rods This site contains affiliate links for which I may be compensated.

It’s a project.

“1970 dj5 mail jeep project. Model A drop axle, hair pins, front disc brakes, vaga box, cross steer, 10 bolt rear-end with triangulated 4 link, break master cylender and petal located and setup, 6″ channel and all new floor pans fabricated, smoothed fire wall set up for small block chevy (motor in pictures is just a mock up motor). Lots of hrs in fabrication spent. Hate to sell but need room for new project. Have vin plate and Idaho title from previous owner. The last picture is the look i was heading for. Need out of shop price is obo.”

https://kpr.craigslist.org/cto/6030854610.html

1970-dj5-extended-miltonfreewater-or2 1970-dj5-extended-miltonfreewater-or3 1970-dj5-extended-miltonfreewater-or4

[fb_button]
 
To Top

1967 CJ-5 Modesto, CA $250

• CATEGORIES: CJ5 This site contains affiliate links for which I may be compensated.

UPDATE: Price dropped to $250.

There’s at least some value in the rims and the hubs (Husky or Allstate possibly).

“Jeep willys project cj5
Fiberglass one piece front end
Nice tires
No motor or trans
Has bin numbers out of DMV system will come with bill of sale and papers need to bring back into system
250 or will trade what do you have ?”

https://modesto.craigslist.org/cto/6048314677.html

1967-cj5-modesto-cali

[fb_button]
 
To Top

1943 MB Nipomo, CA **SOLD**

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $4000

(02/08/2016) “Rebuilt motor tires are good good shape nice little Jeep fun just no time too many projects sitting around asking $5,000 will consider trades”

1943-mb-nipomo-ca1 1943-mb-nipomo-ca2 1943-mb-nipomo-ca3

[fb_button]
 
To Top

CJ-5 Fiberglass Front End Bend, OR **SOLD**

• CATEGORIES: Parts • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $300.

Looks like a good price.

“I have a nice Jeep CJ-5 fiberglass frontend, fits 1955-1971 CJ-5 / CJ-6 short nose. It has not been cut or mounted to any vehicle. Has inner fenderwells and is constructed of a heavier fiberglass. Its a little dirty from storage. $300.00”

cj5-fiberglass-frontend-bend-or

[fb_button]
 
To Top

1944 GPW Rowlett, TX **SOLD**

• CATEGORIES: GPW (Ford MB) • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $10,200.

(05/06/2016) The seller’s bucket is overflowing … just not sure why (first sentence of last paragraph.

1944-gpw-rowlett-tx1 1944-gpw-rowlett-tx2 1944-gpw-rowlett-tx3 1944-gpw-rowlett-tx4

“The 1944 Ford GPW offered for sale here has been restored on top of what was a very solid and rust free chassis and tub. The hood and fenders have slight imperfections which indicate to me that the sheet metal is original as well. I purchased this GPW earlier this year from the estate of a Willys collector, restorer and enthusiast. I chose this one of the four MB/GPW’s available because of its originality and condition. There was a museum quality one in olive drab and Army livery but it was beyond my price threshold.

With the exception of the light blue paint (my son suggested it might be a Navy Jeep), the Pirelli Scorpion tires and 12 volt conversion this little GPW is completely stock. It came to me with a brand new canvas top that was still in a plastic bag. Opening it, unfolding it and installing it inside my shop made the whole place smell like a musty old army surplus store!

Equipped with what I believe to be its original drivetrain this GPW is powered by the Willys “Go Devil” 134 cubic inch iron head flat four designed to produce 60hp and 105lbs of torque delivered through the correct T84 three speed transmission and working two speed transfer case to drive the correct front and rear Dana axles and Warn locking hubs. The truck starts right up and idles cold with a little choke from the original one barrel Carter carburetor. It warms up quickly and runs cool with good oil pressure. The gas gauge is the only instrument not indicating. Steering, shifting and braking (four wheel hydraulic drum system) all work as they did when the rig was new, which is to say these are raucous, rough and tumble vehicles that offer little in terms of ergonomics, comfort or safety. Top speed was claimed to be 65mph although I can’t say I have gotten it much over 50mph but I do enjoy a casual cruise around the neighborhood and in the parade line (so long as I can avoid going in and out of that seriously low first gear).

I am going to guess that this car wasn’t driven much at all before I purchased it. I was impressed to see how readily it came to life but not really surprised because so much of it looks freshly restored. The motor is smooth, sounds good and has ample compression. It might grind a bit on a lazy shift and it does have a few weeps and drips after a day’s work but so do a lot of 72 year olds I know.

I fully admit to being a shameless car flipper. As such I have experienced a good percentage of my “bucket list” cars. I can tell you that this car attracts a lot of attention and draws people from walks of life far and away from the average car enthusiast. I have had the privilege of listening to memories of veterans that span the spectrum of emotions evoked by this little Jeep; from saving a life as a getaway vehicle in Korea to saving some sanity as a surfboard hauler in Vietnam. I have watched teenage girls give compelling (and as yet unsuccessful) arguments as to why their parent should buy them this car. One guy offered to store it for me in the foyer of his business. He didn’t want to drive it he just liked looking at it. Everyone loves the GPW.

Now, my bucket floweth over and it is time to move the GPW. This vehicle is located in Rowlett, Texas and is offered as is where is with no warranty implied or otherwise. Texas residents may be subject to sales tax and licensing fees. If the ad is up, it is for sale.”

[fb_button]