Includes a Newgren Hitch.
“1948 Agri-Jeep, power take off, 3 point hitch (Newgren), runs, factory aluminum plate is 2 inch x 3 inch on the frame in back. Serious inquiries only.”
Includes a Newgren Hitch.
“1948 Agri-Jeep, power take off, 3 point hitch (Newgren), runs, factory aluminum plate is 2 inch x 3 inch on the frame in back. Serious inquiries only.”
Lots of customizations here.
“1952 CJ3A Willys Jeep for sale or trade.
Asking $4000 obo
Or trade for a sedan car gas getter of same value. Selling for a family rig.
The jeep has a Chevy 350 motor with about 500 miles on a new motor. It’s all Toyota running gear. Ford t-18 transmission. CSI 8000lb winch. Super swampers.
Also have a 20 ft bulldog car trailer flat bed that I use to haul the jeep with which is also for sale $2000 for trailer
Call or text 253-four five nine-4663”
Both run.
“WTS: 2 M38A1s
1954:
Excellent condition with almost rust free tub( only 1 spot about the size of a 1/3 of a dollar bill).
Runs like a sewing machine
Ex-Civil Defense jeep
24 volt
Original lights work
Very nice original military jeep
VERY EASY RESTORATION
1952:
Very early M38A1 (data plate indicates 126th M38A1 built)
Tub needs some work
Engine runs
converted to 12 volts
Call Jason at 404-665-6411 for more info or to schedule a visit to see.
Can deliver within 200 miles of 30319 for 1.00/mile”
There looks like some value here.
“I am selling my Willys MB Project. I have a GPW I am working on and I need the space, so this has to go. Everything in the photos is included minus the trailer its sitting on. Its all wartime production. If you’re an MV’er, you will recognize all the wartime features. No engine or tranny is included. The frame is straight and it steers easily. The frame tag and data plates were missing so I don’t know the exact year. I will assist buyer in loading. If you have any questions or would like additional photo please feel free to ask.Its no less than 69 years old and is sold as.No title included I am negotiable on the price but please no lowballing or trades. Please email if you would like to text or call please leave a number and I will contact you ASAP. Thank you for looking.”
UPDATE: **SOLD** Was $12,500.
“This truck is extremely rare! It has been thoroughly gone through from the frame up. It is a 1 ton, 4×4, with the original flat head 4 cyc. New brake lines and all hard ware for all four tires, rims and tires are new, plus interior, glass, gauges, gas tank, wireing, one wire alternator running 12v instead of 6, and the list goes on and on. You can show it or drive it.”
UPDATE: Still Available
(11/13/2013) This runs and drives.
“Great for Hunting and Ranch work. Runs and is drive-able. New brakes, pads and brake lines.”
UPDATE: The auction ended. The link no longer works. I don’t know what his sold for, but I suspect it wasn’t much over $550. It was auctioned at http://www.copart.com
Buz found this FC for auction. It ends shortly at 12PM 1/21. VIN is 6156812303. Current Bid is $550.
I stumbled across this neat forum article about a group of friends who decided to check out Hole-in-the-Rock, Utah, in 1955 after reading a National Geographic article (probably this one). So, in a fleet of three vehicles (looks like a 1949 CJ-3A, a CJ-3B, and a MB/GPW), they set off from Los Alamos, NM and drove to Escalante, Utah, before venturing into the Hole-in-the-rock area. Most of the photos that were taken are in areas now under the water of Lake Powell.
According to the article’s author, “My jeep was a 1949 CJ3 and it was a wreck when I got it. I think it had never been lubricated. I had to replace all the universal joints and overhaul the engine. The cab was aluminum and I bought it at Sears. The red jeep was an old military model. My friend had bought it and built a wooden cab for it himself.”
I wanted to contact the author of this story, but I can’t figure out how to register (says registration is closed) to the popphoto.com forum. Furthermore, I can’t figure out to contact an administrator. I’d like to contact the guy (he was 94 as of 2007 — likely passed away by now), because he doesn’t know what to do with the photos he’s taken.
The author’s notes in a separate post, “I wish I knew some historical society or such that would be interested in the slides I have. None of my relatives and friends are interested in these things. I suppose eventually they will be put in a big cardboard box and auctioned off for a high bid of $1.”
Since that was his wish, I’m going to preserve his story in total here, so I’ve post it below. You can see the original post here: http://forums.popphoto.com/showthread.php?151510-Kaiparowits-Plateau-A-journey-from-the-archives-to-Hole-in-the-Rock-Crossing-1955 along with the follow up comments.
========================
This trip was inspired from a National Geographic article in the 1950s. This magazine had several articles on little known areas of the southwest. Most were in very isolated areas with few, if any roads and trails.
A party of three Jeeps set out from Los Alamos NM to Escalante Utah. We arrived in Escalante about noon time, and then proceeded to find our way to the Hole in the Rock crossing. So named because early Mormon Pioneers lowered wagons and horses to the Colorado River, and then rafted across the river at this point.
Leaving Escalante we headed off in a South-easterly direction. The maps we had showed the distance to be approximately 50 miles.
We passed some remarkable formations, This was known as Dance Hall Rock. Locals had dances here periodically.
After awhile we came to the dreaded fork in the road. As we debated which fork to take, a man appeared on horseback. He asked if we knew where we were going, we said we knew where we wanted to go, but not how to get there. He gave us directions, and on we went. He neglected to tell us what obstacles we would find. After several miles, we came to an enormous outcrop of slick rock, and the tracks we were following ended there. It was obvious that we had to cross the rock, We did that rather easily.
Now here’s a challenging project! Miguel Ward captured this 2011 photo in Bahia Bustamante, Argentina. I checked Google Maps, but couldn’t see it (45° 7′ 32.00″ S 66° 32′ 11.58″ W)
Maury forwarded this jeep-related website. It’s not entirely clear to me what the site is about, other than to encourage jeep owners to wave. I always wave in Biscuit, but never think about it in our new jeep.