To Top

1945 MB Thomasville, GA **SOLD**

• CATEGORIES: MB This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay

(08/22/2012) This runs and drives, but has extreme makeover body steps!

This is a 1945 Willys MB Jeep.  Its your chance to own a rare piece of WWII history at a cheap price.  I have set the RESERVE LOW. 

The jeep has been tagged in GA but there is no Title. GA will not issue title for a vehicle this old.  Purchaser will get bill of sale and copy of my registration and your state will do what ever they do, some will issue title and not sure about others.

Here is what I know!  The jeep is in ok shape for it being 68 years old.  It runs and drives which is good compared to most.  I found this in a barn and the previous owner did not know it was a WWII jeep.  This is what I did to it to get it running and driveable a couple years ago.  Distributor, plug wires,clutch, master cyclinder, front & rear wheel cyc, brake lines, plugs.  This jeep still turns heads of anyone driving by in its condition.

 Now, Jeep is missing some of its original parts, but it still has some on there.  It does not have a gas tank, I have a temperary one in the back now so I can run it.  The seat are not the correct MB seats, & the windshield is from a later model willys(no glass). As you can see in the pics some one has put some sheet metal over the rear fender tool boxes- im sure to cover the small rust holes in there.  Also they put it on the side steps. It can easily be removed by someone who can do meatl work- I cant!  I never had a chance to go thru the transmission. It will stick in third gear every now and then but has never affected me driving up & down road.  data plate on dash are missing, but frame tag is intack.

[fb_button]
 
To Top

1948 CJ-2A Denver, CO **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5500.

(02/17/2013) James pointed out this body has several patches, which I missed. And originally forgot to mention the strange cowl thing (vent?).  I wonder why all the holes in the windshield frame. (see pic 3).

“1948 Willy 2As Jeep. The first civilian jeep model. Used originally as a farm vehicle. I purchased this jeep in 1994 and slowly rebuilt it keeping mostly original parts. It runs well and is fun to drive. Stored inside. I would like to have the space.”

[fb_button]
 
To Top

1953 CJ-3B Colorado Springs, CO $2500

• CATEGORIES: CJ-3B This site contains affiliate links for which I may be compensated.

UPDATE: Still Available

(03/18/2013) This needs a new throwout bearing.

“1963 CJ3B High hood Willy’s Jeep. Powered by a good running ford small block 302. Its a little ruff, but with a little tlc it’ll be perfect. The only thing this rig needs is a new throw out bearing and some new tires to be back on the road again. Clear title and keys (key rather) $2,500 as is, if it doesn’t sell before I fix what’s wrong with it and clean it up then the price will go up to reflect said work. (719) 359-2029 Serious inquiries ONLY!!! If the posting is still up then I still have it.”

http://cosprings.craigslist.org/cto/3687765781.html

1953-cj3b-coloradosprings-co-43 1953-cj3b-coloradosprings-co-42 1953-cj3b-coloradosprings-co-41 1953-cj3b-coloradosprings-co-4

[fb_button]
 
To Top

1946 CJ-2A VEC Skiatook, OK eBay

• CATEGORIES: CJ-2A • TAGS: This site contains affiliate links for which I may be compensated.

It runs and drives. It has the sideshift T-90.

“1946 WILLYS VEC JEEP, SERIAL NUMBER CJ2A 19143, MATCHING FRAME, BODY AND SERIAL NUMBER PLATE, ENGINE IS A LATER MODEL WILLYS 134 “F” HEAD OVERHEAD VALVE (4 of the valves are in the head) WITH 90 HP INSTEAD OF THE STANDARD 60 HP FLAT HEAD.

It has been converted to 12 volt electrics with a remanufactured Chrysler generator, has new carburetor, solenoid, fuel pump, coil, remanufactured 12 volt starter.

ORIGINAL CJ2A Spartan horn, CJ speedo (excellent numbers), fuel gauge, oil gauge, dash light, original 16 inch wheels (one is solid), 6.50 mud grip tires, side mounted spare tire rack, front seat frames, fuel tank, original complete windshield.

Standard Military oil filter, it has the desirable lockout hubs, these are the most positive lockout hubs made, no springs to lock them in, just pull out the levers and turn them to “lock” or “free”, mechanically locks in or out.

Jack and lug wrench and extra spray paint included in tool box under passenger’s seat.

The previous owner made repairs to front and rear floors, not perfect, but very solid and Rino coated to make it quieter, painted it John Deer green and yellow, not perfect, but OK, boiled out the tank and coated inside.

It starts easy, drives good, stops good, works good in all gears, does not jump out of second gear, it will spin all four wheels on take off and skid all four wheels on hard braking. Holds 20-30 psi oil pressure at warm idle, maintains 180 degrees temperature, does not smoke, engine very quiet and smooth. (more info on eBay)

View all the information on eBay

1946-cj2a-skiatook-ok-ebay

[fb_button]
 
To Top

1947 CJ-2A East Haddam, CT **SOLD**

• CATEGORIES: CJ-2A • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay.

This stock jeep in original condition includes a Sears trailer.

You are bidding on a 1946 CJ2A Willys Jeep.  This jeep has not been restored and is in original condition.  As you can see in the photos the life of this jeep is easily documented from the day it was ordered until today.  It started out life in New Hampshire where it was purchased for farm life.  Shortly after purchase the owner died and the jeep sat for many years.  A car collector who lived next to the farm took the jeep in but never used it.  That is who I purchased it from and have been the proud owner for the past 20+ years.  Please note that Connecticut is not a title state, so I do not have a title to go with this jeep.  I never got one and can not supply you with a title.   The jeep, in perfect running condition, has 7218 miles on it as of today.  Hopefully you can see in the photos how nice the body is, but if you can’t and you would like to come see the jeep in person and give it a test drive you are more than welcome to come and inspect it for yourself.   (read more below)

1947-cj2a-easthaddam-ct

Continue reading

[fb_button]
 
To Top

The O.E. Szekely CJ-3A APU Navy Jeeps

• CATEGORIES: Features • TAGS: , This site contains affiliate links for which I may be compensated.

I’ve been assembling some information on the O.E. Szekely and Associates Navy Jeeps built from CJ-3A parts. These were used to act as “Self-propelled electric power plants” on land and on battleships. They were made in three-wheeled and four-wheeled versions.

There is also a report that O.E. Szekely served 3 1/2 years in the USNR. This may have given him the contacts necessary to arrange the contract(s) for the APU Jeeps.

Link to a discussion on the CJ-3A Page
Link to a discussion at G-503.com
Some great photos from WillysArgentina of APUs

1. UPDATE: I dont’ know why I labeled this an APU. It was definitely in the Navy, but after further review, I see no reason to think it was a Szekely jeep. It is a Four wheel CJ-3A with a L-head that was listed here http://www.ewillys.com/2010/04/28/1951-navy-cj-3a-denver-co-ebay/

2. Four wheel CJ-3A APU with a F-head (and hood bump). The two extra gauges were added as well. Here are a couple pics of Tom’s jeep.

apu-cj3a-fhead-apu1 apu-cj3a-fhead-apu2

3. Three wheel CJ-3A APU with a L-head.

Article from July 1951 issue of Popular Science Page 142

4. Three wheel CJ-3A APU with a F-head (and hood bump). The APU pictured in color below is from the Miramar Marine Corps Air Museum in San Diego

[fb_button]
 
To Top

1948 CJ-2A Moses Lake, WA **SOLD**

• CATEGORIES: CJ-2A This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was $5500.

This looks like a nice rig.

“350 edlbrock intake holly 500 outa frame headers flow master mufflers Muncie 4spd advanced adapters to Dana 20 Dana 30 front new ball joints aftermarket steering 4.27 gears 9 inch rear new axle shafts locker disk breaks 33-12.50-15 Yokohama tires 50-60% front shock hoops tilt front clip led tail lights tilt column roll cage runs drives good .
Could use a new master cylinder for breaks soon still in the works to finish the front driveline and a few little odds and ends . Just painted last month not the best paint job in the world but I’m not a pro yet still looks very nice . 5,500 Obo call or text any time !”

1948-cj2a-moseslake-wa2 1948-cj2a-moseslake-wa1

[fb_button]
 
To Top

3 FC150s 1957 $8200 and 2 parts FCs $1200/per Creal Springs, IL

• CATEGORIES: FC150-FC170-M677 This site contains affiliate links for which I may be compensated.

The FC-150 looks good.

“have a 1957 jeep fc150 restored all new interior, dash door panels,seats, arm rests. new brakes, clutch, with oringal motor, paint older but still looks real nice. the jeep is $8200. also have t2 more jeeps for parts if anyone has a fc150 needing parts for $1200. for both 618-751-0652”

http://carbondale.craigslist.org/cto/3699307803.html

3-fc150s-crealsprings-il1 3-fc150s-crealsprings-il2 3-fc150s-crealsprings-il3 3-fc150s-crealsprings-il4

[fb_button]
 
To Top

1944 MB Lynnwood, WA **Status Unknown**

• CATEGORIES: MB • TAGS: , This site contains affiliate links for which I may be compensated.

UPDATE: Status Unknown. Was listed at $11,999.

Looks real nice.

“1944 Willys MB jeep restored to military specification. Titled in WA state. 160 miles since restoration. Body off restoration. Original chassis sand blasted and painted. Rebuilt suspension, differentials, hubs, brakes, transmission. Rebuilt engine with new pistons, polished crank, new bearings. Original body with replacement toolbox and fuel tank wells. Original fuel tank repaired and lined. 6-volt electrical system with correct generator. New seat cusions and covers. New correct wiring harness. 4 original combat rims with new NDT tires. Toolkit and jack included. Some spare parts, manuals, parts, and books. More than $20,000 invested. Needs top bows, mounting brackets and canvas top.”

1944-mb-lynnwood-wa1 1944-mb-lynnwood-wa2 1944-mb-lynnwood-wa3 1944-mb-lynnwood-wa4

[fb_button]
 
To Top

1945 Flattie Gainesville, TX **SOLD**

• CATEGORIES: CJ-3A, MB • TAGS: This site contains affiliate links for which I may be compensated.

UPDATE: **SOLD** Was on eBay

(03/13/2013) This seller has provided a detailed list of parts and work. It looks good.

“FRAME  Boxed and cross strengthen front and rear.  FRONT AXLE  Custom  rebuilt from 69 M38A1 4:27 ratio. Differential & Disk brakes from Drive Train Whse.  STEERING Upgraded .50in to 1.25in from 69 Army 1.24 truck. Steering arm & box rebuilt from GM Saginaw off a 78 Suburban.  REAR AXLE  Dana 44 Summers Brothers one piece SAE4340 advertised to withstand 1400 ft pounds torque.  DIFFERENTIAL Reider Racing Power-Lock.  REAR BRAKES 11” X 2″ drum from Drive Train Whse.  ENGINE Custom built by SFD Engines of Dallas.  330 HP &423 foot lbs torque @3300 rpm.  355ci, 4 bolt main small block Chev, Flat top hypereutectic pistons, Total Seal moly rings.  Comp Cams “off road” high torque cam. Intake lift .442 duration .288. Exhaust lift .465 duration .298. Heads are TrickFlow TwistedWedge, aluminum model TFS-31400001, 64cc chambers. 2.02/1.60 stainless steel valves CNC ports. Compression ratio 10.4. Rockers are Crane Cams Gold Race #CRN-10759-16.  1.6 ratio needle bearing.  Block was magnafluxed, line bored with to rque plates, crank was turned cambered & polished. Rods are chev “pink” resized & aligned.  All rotating engine assembly balanced to under .04 grams.  Oil pump is Melling high volume/pressure . . . view more info on eBay”

1945-mb-gainesville-tx

[fb_button]